Frequently Bought Together
Product Features
|
Product Details
Would you like to give feedback on images?
|
Product Description
From the Manufacturer
The Configurations 2 Drawer unit is able to mount directly to any Configurations Closet Kit (available on Amazon.com). This unit comes in a stylish yet classic maple finish. Order two or more and install side-by-side if you so choose.
Product Description
Compatible with any Rubbermaid® Configurations kit. Expands the storage potential of your closet.
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
9 of 9 people found the following review helpful:
4.0 out of 5 stars
Excellent,
By
This review is from: Rubbermaid 3E30 Configurations 2 Drawer Hanging Unit, Maple (Kitchen)
Hmmm...have to completely disagree with previous reviewer: this is an excellent product. Went together perfectly. Of course I am experienced building stuff like this, but my wife made one as well, perfectly.The units are very sturdy and, naturally, hook right into the Configurations system. The action is smooth and nice to use. The satin nickel hardware is GORGEOUS! Looks really refined and delightful to use. Here is one gripe: Rubbermaid has you install the system a certain height above floor level. If you have no extender bars (like in the deluxe set, I have the classic) and you want to mount this thing so that the top of it is shelf-level (meaning you can put your wallet and keys in a dish on it for easy access, like I do), the unit will extend below the bottom of the support bars, and will lack support on their lower end. The result is that it "tilts in" towards the wall a little on the bottom. Of course that is for Classic kit owners only, and extender bars will both fix this and allow you to do what I did, which was put shoe racks beneath it, a perfect application for me. Anyhow, I really dig this product: it is smooth, functional with a high-quality laminate veneer (no "sticker" veneer like Bush flat-pack furniture). It does not roll out as much as you'd expect, as I think they tried to be conservative for not-so-deep closets, so the drawers would not extend out and hit doors. Mine has plenty of clearance, though. The configurations line is good stuff for cost-effective organization. Not absolutely gorgeous, but looks a lot nicer than the usual "included" stuff you get with a home.
3 of 3 people found the following review helpful:
3.0 out of 5 stars
OK but more cons than pros- ideas to maybe make yours better.,
By Mark Star (NJ) - See all my reviews
This review is from: Rubbermaid 3E30 Configurations 2 Drawer Hanging Unit, Maple (Kitchen)
This is an early 2011 review. Instructions are still a little weak but easy to figure out with some review.. I knew what I was doing and it still took an hour min. to assemble the box and drawers, hang, ect.Actual useable drawer space : Approx. 19.75"x 10.75"x 5.62"5 (lxwxd) Can have about 6.25" stacked in, per drawer. Pros: When folded properly drawer can hold 16 medium T-shirts. Pro:s Rolling glides move smooth but they also have a con. (see below) Pro: fits my Closetmaid Fast Track system. I was not sure if they were the same track but it works. Sadly :There are more cons than pros. Cons:The instruction drawings for the Side panels are missing some holes and the scale is off. This was the only slow down to starting assembly but once figured out that they did did not draw in some holes. One side of the instructions are a prodcut list and the other 6 steps with very little text. Over all the instruction drawings can be figured out. Tip: Just keep thinking about the finished product and some questions of the drawings will be eliminated. But I agree they need to improve. Con: they say laminated but I think it is only paper lamination or the thinnest of any lamination when looked on the side. I would not let the surface get exposed any moisture since you might see the particle board show through. Like I said it is paper thin what every it is. Consider a drawer liner to protect the paper finish bottom. Con : Only some edges are faced. The facing is thicker lamination like I hoped the entire piece would be. They do not face the back drawer top because the drawer does not full extend. Con: drawer rollers- I thought would be a plus but the drawer does not pull out far enough. I COULD hvae overlooked allot of cons if they had just made 3/4 extension. Sadly you only get 5.75" space to try to get shirts out. Tip: You can lift the drawer out of the lock position and get another 2" but then have to hold in one hand. to keep the drawer in place. But it will still roll back into place when ready. Tip: I am considering buying full extension slides and converting this.You can find them on line for $6 a pair. As I said, I could look past the low material quality if the drawers just opened to 3/4. Con: Drawer base is thin paperboard. It slides into the drawer front and is nailed on the back and the glides hold on sides. Problem I have with this is that there are only 2 small screws per glide and you are screwing INTO PARTICLE BOARD EDGES! This is a NO NO. There is no real strength screwing in this direction and it could split if nailed too close to the edge. 5 brads nailed into particle board is supposed to hold up over time? Problem is that weight from what you put in the drawer push down and you are nailing UP so over time if too heavy this design will make it pull away. Tip: might want to add some glue for the long hall. If you change the glides you will need to better secure this bottom. Con: Drawer face method of joining needs a little glue. I have used the dowel and turn scew on cabinets and they do not hold up well. I would recommend a little glue on the dowels as long as you are sure you want to keep this. Otherwise I see issues when the dowels loosen in the holes. Con: Screws are soft. Use a hand screwdriver , push firm and go slow or else you WILL STRIP these screws. Con: Pictures lie: You screw through the sides with four screws and then then add a cover cap. They have changed the design from the photo on the box or have air brushed it out. Everything is butt joint and minimal screws. Also I feel they could have increased a little interior space if they had the draw back screw to the back of the side ends. So over all this is a fair to average poduct. Well it IS in a closet so how fancy does it have to look? As for function seriously consider changing the glides to full extension slides. I would have rated it higher if they change the drawer glide to full extension and provide higher quality screws. I doubt those two things would add that much to the cost if any. Fixing the other cons might add to the cost but then you whould have more demand for a higher quality product. Keep working at it Rubbermaid. (I bought mine at a major hardware store as suggested by another review. Still think for what it is , even at $45 it is a bit high with the issues it has. It will do the job but I can not rave over it. Go to a local store that carries rubbermade and see it first, if you can find it on display.
3 of 3 people found the following review helpful:
4.0 out of 5 stars
Assembly required!,
By Jimmy G (Marietta, GA USA) - See all my reviews
This review is from: Rubbermaid 3E30 Configurations 2 Drawer Hanging Unit, Maple (Kitchen)
You should have a decent amount of patience before attacking the assemblage of this. However, once complete, it looked GREAT and is very functional for things like gloves, scarves, woolly socks, etc. Make sure you have two vertical extensions that are 22" apart or you will have difficulty fitting this in...
Share your thoughts with other customers: Create your own review
|
|
