The SAX-125.2 was designed to replace our SAX-100.2 model -- it features an upgraded power supply for a bit more power as well as greatly enhanced crossover flexibility. This unit was built to satisfy the discerning audiophile who doesn't necessarily want to spend huge sums of money on his full range amplifier. This amplifier utilizes high quality Sanken bipolar output transistors, and 12 of them at that! The SAX-125.2 is also equally suited for subwoofer applications where tremendous power is not called for.
* 2/1 Channel Bridgeable Class-AB Amplifier * MOSFET PWM Power Supply * Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load * 12dB Octave Electronic Crossover Slope * Variable Subsonic Filter * High Pass Filter Variable with x 10 Range Selectable Switch * Low Pass Filter Variable with x 10 Range Selectable Switch * HPF/FULL/LPF Selectable Switch * Variable Bass Boost Control * Variable Bass-Boost Frequency Control * Variable Input Level Control * Input Sensitivity : 200mV ~ 6V * Subsonic Filter : 10Hz ~ 500Hz * Signal Input and Line Out RCA Connectors * Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection) * Tested Voltage & THD: 14.4V & Less than 0.05% THD * Operating Voltage : DC10V~16V Power Input * Wired Remote Controller
RMS power, 4 ohm stereo 125W x 2CH RMS power, 2 ohm stereo 200W x 2CH RMS power, 4 ohm bridged 400W x 1CH Signal to Noise Ratio >90dB Low pass frequency crossover 50Hz ~ 5KHz High Pass Crossover 30Hz ~ 3KHz Variable Subsonic Filter 10Hz to 500Hz Bass Boost 0~18dB Variable Bass-Boost Frequency Control 35Hz to 120Hz Frequency Response 10Hz ~ 40KHz (+/-1dB) THD@RMS Watts <0.1% Channel Separation 75dB Fuse Rating 20A x 3 Input Sensitivity Variable 200mV~6V (+/- 5%) Dimensions 252(W) x 58(H) x 340(L)mm