Customer Reviews

447 Reviews
5 star:
4 star:
3 star:
2 star:
1 star:
Average Customer Review
Share your thoughts with other customers
Create your own review

The most helpful favorable review
The most helpful critical review

370 of 405 people found the following review helpful
5.0 out of 5 stars Easy Install, Elegant Looks, & High Fidelity
We have a small 10'x12' game room for our Xbox 360 and Wii U. Each console is hooked up to a LG 47" LED TV. The video quality is fantastic but the sound left a lot to be desired. This "problem" needed a solution. I set four simple goals to address this.

1) The system had to sound great.
2) High Wife Acceptance Factor. :)
3) I did not want to run a...
Published 23 months ago by AreYouKidding?

1,200 of 1,281 people found the following review helpful
2.0 out of 5 stars True 5.1 ruined for the sake of simplicity
I'm a HUGE Sonos fan. I own 3 Play:5's and a Sub. I'd been wanting to replace my bulky 5.1 speaker system with a Playbar since it was rumored. All their products have incredible sound quality so I was optimistic about this set up.

Set up is easy, sound quality is good for the unit. It's a nice product and looks great while being easy to operate (although...
Published 23 months ago by William B. Partridge

‹ Previous | 1 245 | Next ›
Most Helpful First | Newest First

1,200 of 1,281 people found the following review helpful
2.0 out of 5 stars True 5.1 ruined for the sake of simplicity, March 8, 2013
Verified Purchase(What's this?)
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
I'm a HUGE Sonos fan. I own 3 Play:5's and a Sub. I'd been wanting to replace my bulky 5.1 speaker system with a Playbar since it was rumored. All their products have incredible sound quality so I was optimistic about this set up.

Set up is easy, sound quality is good for the unit. It's a nice product and looks great while being easy to operate (although more reliant on the Sonos application than I'd prefer). It's the typical awesomeness that you get with any Sonos product.

When testing the Playbar with a direct connection to a device (e.g. Apple TV) and running it compared to my 5 speaker system through my receiver I was impressed with the quality. Sound was more spread out and filled the room better but dialog/center was ultimately a bit shallow feeling. If you turn on speech enhancement in the menu it helps out but something still feels slightly off. It's something you're unlikely to notice unless you're actively comparing like I was but to the Playbar's credit it was no slouch. I had a few people compare with me and everyone picked the typical 5.1 setup for better sound but had positive things to say about the Playbar - mainly noting its shallow feel in certain rangers and with dialog as the main issues.

Here's the issue though: Sonos says they want you to use your TV as a hub, all the inputs going to the TV and then optical audio out from the TV to the Playbar. Great idea - but the problem is that most TV's won't pass Dolby Digital (DD) 5.1 surround from HDMI to the digital/optical audio. If it's from the TV itself (such as Netflix on a smart TV) or input directly from the coaxial cable it will pass 5.1 through the optical port BUT not from HDMI. This is either required to be HDCP compliant or is a licensing/cost issue (not sure). There are a few tv's that do this but they're few and far between and hard to verify.

So if you have multiple sources (say an Xbox 360, Blu-Ray player, Apple TV, etc) there's no way for those sources to ever deliver 5.1 to the Playbar as Sonos intended (assuming you add a sub and some Play:3's to the mix). And you can't wire multiple inputs directly to the Playbar because they have a single input for the sake of simplicity. Normally I'm fine with this, but in light of the limitation with HDMI => optical pass through on TVs this became an oversight to me upon learning about the pass through issue. You can solve this by finding a TV or receiver that does pass through DD 5.1 through the optical audio, but you shouldn't have to. Alternatively you can use an optical audio switch, which is fine most of the time but may not work with a blu-ray player since Playbar lacks DTS support and are also limited on inputs, but this doesn't solve what to do for certain devices that don't have an optical audio port (e.g. most computers, Wii U, etc).

In the end you're left with a system that is capable of producing much better sound (especially if a sub and some Play:3s are added) that most everyone won't be able to hear and results in this not sounding as good as it costs. And that's just a shame to me.

++Easy set up
+Decent sound from stereo source

---Single optical input only
--No DTS support
--Entire package is expensive for 5.1 (or even 3.1)

The only scenario I can see this being a good thing is if you have a room where you want to add a Sonos component and a soundbar to and you want to do it in a single package without caring about other components, like for a Den or a bedroom. Any other solution seems like there'd be a better option.

Ultimately I'm disappointed. Had Sonos included multiple audio inputs or HDMI pass through, or even better yet HDMI switching (in place of a receiver) then this could have been an amazing piece. But the reliance on a single optical input being provided from the TV, one which will down convert any HDMI source's audio to stereo sound, in the name of simplicity just seems like a bad idea.

Had I known about the tv's not passing through audio I wouldn't have bought this. My mistake, honestly, but it just makes it baffling as to why Sonos didn't provide different input options. As it stands I'm returning it. Hopefully Sonos will look in to making an HDMI hub option as an accessory.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

370 of 405 people found the following review helpful
5.0 out of 5 stars Easy Install, Elegant Looks, & High Fidelity, March 5, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
We have a small 10'x12' game room for our Xbox 360 and Wii U. Each console is hooked up to a LG 47" LED TV. The video quality is fantastic but the sound left a lot to be desired. This "problem" needed a solution. I set four simple goals to address this.

1) The system had to sound great.
2) High Wife Acceptance Factor. :)
3) I did not want to run a separate A/V receiver. I simply don't have the room.
4) I did not want to run wires under the baseboards or carpet.

To achieve these goals I decided to build a complete Sonos Home Theater System, with the new PLAYBAR front and center (literally).

Here are the components I chose for my system:

- Sonos BRIDGE
- Sonos SUB
- Sonos PLAY:3 (x2 as Surround Speakers)

Let's start with the setup. First thing I did was download the Sonos software for my laptop and hooked up the Wireless BRIDGE to my router. After the software downloaded and installed, getting the BRIDGE recognized by the software was as simple as pressing a button.

After the BRIDGE was set-up, I went on to tackle the PLAYBAR. Installation was equally as simple. An optical cable from the TV along with power from an outlet are the only two wires needed to get running. Press a couple buttons to sync the PLAYBAR with the BRIDGE, follow a few prompts in the software, disable the TV speakers, and the PLAYBAR is handling audio for my TV and game consoles. It was super-simple and a dramatic improvement in fidelity compared to the TV's built-in speakers.

Next up was adding the subwoofer and surrounds. I found a nice spot in the corner of the game room and hooked up the power cable to the sub. Press a button on the front of the SUB, follow a few prompts in the software, and the subwoofer is handling the low frequencies. Adding the two PLAY:3 surround speakers was just as easy. Provide power to each PLAY:3, press two buttons on each speaker, follow the prompts in the software, and your done.

My new Game Room/Home Theater system was complete. Installation took less than an hour from start to finish. No big bulky receiver, no running wires under the carpet or baseboards, and the wife approves!

How does it sound?

After minimal tweaking in the Calibration Menus I got the sound just right. Mids and highs are clean and crisp, voices are clear, and the SUB is in perfect lock-step delivering deep/tight bass to Movies, Music and Games. This is an incredibly balanced combination that fills the room with accurate, high-quality sound. I honestly wasn't expecting to be this impresssed. I'm stunned by quality delivered without a dedicated A/V receiver. Incredible job, Sonos!

Here are a few of the software features that I found most helpful.

1) You can turn off the white status light on each speaker. This is great if you find those lights to be a distraction when the room is dark.
2) You can enhance/amplify "Voice/Speech" which makes hearing dialog at low volume levels much easier.
3) Not all room seating is rectangular. When calibrating the Surround Speakers you have the option for setting distances independently for the main seating position. Note: This is somewhat limited as the only three options to choose from are less than 2ft, 2-10ft and over 10ft.

I took some screenshots of the software menus I found helpful. Check 'em out under Customer Images along with some photos of the PLAYBAR in my game room.

I almost forgot. A review wouldn't be complete without at least a "Con". Here is my one real pet peave. There are no official Windows RT or Windows Phone 8 apps. It would be great to use my Surface RT tablet and/or my Nokia Lumia 920 phone as a controller for the system.

That's it for now. Thanks for reading!
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

211 of 230 people found the following review helpful
4.0 out of 5 stars More Than a Sound Bar, but Less Than Perfect, March 6, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
The SONOS PlayBar may seem expensive, but only if you look at it as just another sound bar. Really it does much more (and I'll get to that). But first, as a sound bar, it works well and is pretty easy to set up: plug in the power cord and an optical cable from your TV and that's it, as far as audio connections go. To fully configure the unit and get it to work with your existing remote, you'll need to install the SONOS controller app (free) which runs on PC, Mac, Android and iOS devices. In the app is where you "add a device" (add the PlayBar to your home network) and establish the SONOS network in your home.

If you don't have any other SONOS products in your home already, you'll need to either connect the PlayBar to a network router or network switch with a standard network cable (one of which is included in the box), or purchase a SONOS BRIDGE which plugs into your network router and allows the PlayBar to connect to your network wirelessly. The reason you need this is that the SONOS mesh network is actually separate from your existing WiFi network (it makes its own), which is great because it doesn't interfere with regular WiFi traffic, and vice versa. This means fewer dropouts in your music.

UPDATE: earlier this year, SONOS rolled out a software update that allows all existing SONOS speakers to work without the need for a Bridge. So as long as you have a solid WiFi connection in your home, any SONOS speaker (even a Play:1 or the PlayBar) can play music wirelessly.

Adding the device requires pushing a couple of buttons on the unit itself when prompted by the app and then telling the SONOS app what room it's in. Then you can program the PlayBar to respond to your existing TV remote or cable/satellite set top box. An on-screen wizard walks you through this. Tip! - If you can't get the PlayBar to recognize commands from your DISH or DIRECTV or cable remote, then you may need to first set up that other remote to control your TV. Most set top box remotes come without any TV remote commands pre-programmed into them so if you try to program it into the PlayBar, you won't get very far. This was a problem for me with a DISH remote until I first programmed the DISH remote to control my TV, then the PlayBar was able to see the remote and respond to it for volume control. Once you do that, you can do the basic operation of the bar (volume up/down) using your existing remote control, and you won't have to refer back to the app. The PlayBar's optical digital input automatically gets preference, so if you're listening to music on it, then turn on the TV, it will automatically switch over to TV sound.

In terms of sound quality, the PlayBar blows away any TV speakers I've heard. The thinner a TV gets, the worse it sounds. Speakers need some room to resonate, and the PlayBar has that, while flat panel TVs do not. Movie dialog, male or female vocals have a nice transparency on the PlayBar, treble and high frequencies are detailed without being harsh and bass response is tight, if not prodigious (there's only so much bass you can get from a small cabinet).

The PlayBar uses some acoustic and electronic techniques to expand the sound stage so it sounds wider than it is. I noticed this on a few songs and movies, but it was particularly obvious on Rush "2112" and on The Moody Blues "Wildest Dreams." The instruments appeared to be located outside the edges of the bar while vocals were locked in place in the center. There are a total of 9 speakers on the PlayBar (each with its own amplifier) and SONOS uses this entire array to create a coherent soundstage.

But, as good as it sounds, the PlayBar isn't perfect. Bass is on the lighter side, and if you use the EQ controls in the SONOS app to boost the bass, it gets a bit boomy. Also, the PlayBar can get a bit congested and harsh when pushed to higher sound levels, though this is definitely better if you add the Sonos sub. With the sub, the PlayBar can then allocate its amplification and drivers to the midrange and treble which are easier to drive without distortion. Also, these sonic deficiencies are only evident when comparing the unit to dedicated speakers and amplification.

But there are two reasons why the PlayBar is unique and gets my recommendation: A.) it's upgradeable to fully discrete and wireless 5.1 surround (with the addition of the Sonos sub and a pair of Play:1 or Play:3 speakers) and B.) it's a SONOS! (more on that later). I tested the PlayBar on its own and then with the sub and play:3 rear speakers. Adding the sub and rear speakers was a simple as adding the initial PlayBar to the Sonos network, but there is a new option within the "room set-up" that allows you to add the play:3s, play:1s (or a Connect amp) as surround speakers for the PlayBar. The set-up wizard asks a couple of questions about distance from listening position to the rear speakers and (for the subwoofer) some questions about the levels, but that's about it.

With the sub and play:3s added, the system was able to reproduce discrete 5.1 channel Dolby Digital surround sound. I confirmed this using a 5.1 channel test track from one of Dolby's sampler discs as well as some movie clips and a couple of full length films. The PlayBar does not decode DTS but this may not be a show-stopper for some as few TVs output or pass through DTS. The issue with this or any sound bar that uses the TV's digital output for sound is that most TVs will not pass through a Dolby Digital 5.1 signal from source through to TV output. Some Sony TVs do it as well as some VIZIOs and some LGs (there may be others), but most TVs will drop the signal down to 2-channel output at the fiberoptic digital out. For this reason, I would have liked to see a second digital input on the PlayBar as well as DTS decoding. I can understand why SONOS chose this single-input approach - if there were an "input" function on the PlayBar to switch inputs, chances are things could have gotten confusing for most users. Still, for advanced users, the second input and DTS decoding would have been appreciated.

There is a workaround to this issue (not the DTS decoding, but the extra fiberoptic input), if you're willing to sacrifice some simplicity. You can buy a fiber optic digital audio switch box, connect your devices to this, plug its output into the PlayBar and then get discrete 5.1 surround from Dolby Digital content on a cable box, streaming set-top box, DVD player or Blu-ray player. There are several of these switches available on Amazon including this basic manual switch, and this more advanced remote-controlled switch. There are many others available like this.

In any case, The PlayBar does decode surround-encoded 2-channel PCM or Dolby Digital sound (which TVs do output) and will give you a reasonable surround sound stage even from this material as long as there is rear channel information encoded into the content. And if you do have a true 5.1 source, like the streaming apps built into your TV (Netflix, Vudu, Amazon VOD) or your TV's built-in ATSC tuner, then you will get even better sound with discrete surround information.

Watching a movie in full 5.1 Dolby Digital surround on the system is a vastly improved experience over the PlayBar alone: bass is deep and extended without being bloated; surround effects emanate from all around the room and overall dynamic range is greatly enhanced as the PlayBar is able to concentrate all its power on the front three channels, without having to worry about surround or low bass. The only caveat? Adding the sub and play:3 rears brings the system cost from $700 to $2000 and that's a bit steep.

SONOS: The Killer App for Music

In addition to being a sound bar, the PlayBar is also an independent wireless SONOS zone. This means you can fire up the SONOS app on your phone or tablet, access your entire music collection stored on a PC or local network drive (or in iTunes on an iPhone or iPad) and play it back through the PlayBar. You can also access a ton of different online music streaming services, some of which are free, and some of which require a subscription. I was finding songs and discovering new artists on Spotify, accessing my local MP3 collection on my PC and streaming Pandora radio stations just minutes after opening the box. And the nice thing about SONOS is that it manages music from these different services in a single playback queue - so one song came from Spotify, then a couple from one of my ripped CDs, the next from Spotify... you get the idea.

For those who say you can do that streaming stuff with AirPlay, or an AppleTV or a streaming Blu-ray player (etc.), I say, "poppycock!" To use Apple TV, you're limited to the Apple ecosystem (e.g. iTunes) and whichever apps they choose to enable. SONOS is more of an open platform with support for different file formats as well as all of the most popular music streaming apps and services. Also with AppleTV and virtually any other streaming media box, you have to have the TV on and switched to the correct input in order to hear anything. For music listening, this just isn't convenient. With the PlayBar, everything is driven through the SONOS app on your smart phone, PC or tablet. Pick your music, press play and you're good to go. And when you want to switch back over to watching TV, the PlayBar handles that for you automatically so the sound matches the picture.

I find myself listening to a *LOT* more music with the PlayBar in the living room, because it's not just easy but actually fun. If you're feeling adventurous (or home sick after a move) you can also access any of thousands of streaming internet radio stations, right within the app.

If you add on more SONOS components (Play:3, Play:5, etc.) throughout your home, you can decide which room gets which music, right from your smart phone, PC or tablet. It's an advanced multi-room audio system without the cost of installation or the need to rip up your walls. Also, with the PlayBar in the system and connected to your TV, you can pipe that TV sound to any other SONOS wireless zone in your home which was an unexpected treat for me.

For TV listening, the PlayBar has some nice features which work standalone or with the full 5.1 system. "Night" mode compresses the dynamic range so you can hear whispered dialog and subtle surround effects without the loud parts of the movie being overpowering. "Speech enhancement" brings the dialog forward in the mix so you can make out what characters are saying, even when there are other distractions. You can use both at the same time or each feature independently. I tested both and found that they did make subtle but noticeable improvements to dialog intelligibility. And the Night mode did equalize differences between soft and quiet points. I found I could keep "Sherlock Holmes: A Game of Shadows," at a reasonable volume level and I didn't need to leap for the remote when the explosions kicked in. But for daytime movie viewing (and for music) I left these features turned off.


* Good sound overall, considering size
* Simple connection and set-up
* Nice looking and nice personality
* Flexible installation
* SONOS app puts the world of music at your fingertips.


* Needs more bass
* Gets a bit congested at high volumes
* Could use a second fiberoptic input and DTS support
* Limited by TV's ability to pass through 5.1 surround
* A little pricey

Reviewing the PlayBar is a bit tricky. As a pure sound bar, it's a nice sounding simple solution that can plug and play with your existing TV and remote. But again, as a pure sound bar, it's expensive and doesn't offer the low bass extension of many more affordable sound bar/subwoofer combos. But unlike most sound bars, the PlayBar is upgradeable. Find the bass a bit light? Add a sub. Want to experience discrete surround sound? Add a pair of Play:3s as surrounds. This is something most other sound bars simply cannot do. But what really sets the PlayBar apart from every other sound bar on the planet is that it's also a SONOS wireless speaker with all the streaming musical goodness that the SONOS platform has to offer. You'll come for the enhanced sound from movies and TV, but you'll stay for the music. Highly recommended.

UPDATE (October, 2013): The rear channels of a PlayBar 5.1 system can now be the new less expensive Play:1 speakers, or you can use your own speakers with the CONNECT amp. The Play:3 is also still supported as a rear channel speaker for a PlayBar multi-channel system.

A more detailed review is available on Big Picture Big Sound (dot com).
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

226 of 275 people found the following review helpful
3.0 out of 5 stars I like Playbar, but it is not for everyone, March 6, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
This is addition to my Sonos enabled home, so you can also read my reviews of other Sonos products. Sonos makes amazing home audio solutions, so whenever I add a component, I always write a review...

Summary : I was so excited by the concept of a Playbar. I have Sonos speakers in two other rooms of my house, but it is unfortunately not integrated in my two rooms with surround sound speaker systems. I would kill to have Sonos wireless music in those rooms, but seamlessly integrate with my existing A/V setups. That is what Playbar is for. Super exciting. While the setup experience and audio quality of Playbar is great and up to the usual Sonos quality bar, it unfortunately doesn't work with my Sharp Aqous TV, and I think that might be the tiny Achilles heel of this product. It probably works with most, but not every HDTV, due to a basic setup assumption. I love the Playbar concept, and it probably works great for most people!

Review :

I got this product to integrate into my main living room A/V experience. My LR is about 20'x16' with no separation from another 20'x16' dining room. Relatively big space to fill with audio. I've got a relatively generic 5 speaker setup, with no sub because everyone else in the house complains about the noise level when it is enabled ;-) I mounted my Sharp Aquos 46D62U on the wall, and ran HDMI and component
in-wall between a lower cabinet and the wall plate behind the Sharp. Pretty standard. I've got a number of HDMI sources running into a Onkyo amp, then one HDMI from the amp to the TV through the in-wall wiring. My goal in adding Playbar was to disable the existing room speakers, and use the Playbar as the audio source. I would get full Sonos integration plus audio from my existing PS3, Xbox 360, and AppleTV. Wee!

The out of the box experience was mostly to Sonos's standard quality level. I've come to expect that setup is very easy, and it was. They've added the steps needed to check audio coming from your TV source, and to configure your remote control to change volume on the Playbar. This all worked well for me.

The sound quality was also up to the high Sonos standards. I loved having my music collection seamlessly stream into my living room, finally. And as I'll explain in a minute, when I tested with an alternate TV, the audio quality for game (PS3, Xbox 360) and movie sources was quite good. I think for bigger rooms you'll want to add the Sonos Sub for depth, but for smaller rooms the sound was high quality and bright.

There were two big gotchas that will not affect everyone, but affected me. I think it is important to understand them before purchasing a Playbar:

1 - If you have an in-wall installation for your TV, adding/retrofitting Playbar into the environment is not hard, but requires some manual dexterity and a longer digital audio cable than ships in the box. Most people with an in-wall installation do not think of putting optical audio cables into the wall during the initial buildout. Audio was supposed to transfer via HDMI in the new world order. This means you have to difficultly get behind the TV (most of the time flush mounted), plug in an optical audio cable, then run this unsightly cable down from the TV to the Playbar. I went in-wall because I wanted a nice aesthetic, but that cable ruins the clean visual experience.

The optical cable that ships with the Playbar is way too short for most runs from the back of a wall mounted TV to the Playbar. Most TVs have their connections in the back to one side (right, often), so you have to run the optical cable back to center, then straight drop it to the center of the Playbar where its connectors are. If you don't want an oddly angled cable running from the Playbar to the TV, this involves a few 90 degree bends, which adds to the required cable length. The Sonos supplied short optical cable was in no way long enough for this, but as a bit of an audio geek, I had extra optical cables of various lengths. If you don't have extra optical cables of longer length, be prepared to buy one to finish this install. This is a rare "fit and finish" miss for Sonos.

2 - The basic premise of the Playbar solution is that you run all HDMI to the TV, then an optical audio cable from the TV to the Playbar. This is a huge assumption about the age of most people's TVs. New TVs have plenty of HDMI ports and the assumption that there is a working audio optical out is probably ok. What I learned is that my older (sold in 2006-2008 at high volume) but still good Sharp Aquos 46D62U has that optical audio out, but it was designed only for ATSC (over the air HDTV) audio. It is not a generic pass-through audio port. Translation, the Playbar does not work with my TV. But I had no way of knowing this when I got the Playbar. There is no list I could find of TVs that will not work with the Playbar, but I can guarantee these exist. It took me three hours of super geeking to learn all of this, buried in manuals and AVForum posts. In this way I'm not the average Sonos customer, as less of a geek would have gotten frustrated and taken something back well before this.

I trust Sonos, and assume that the vast majority of TVs work with this digital audio pass-through model. I grabbed a newer Sony TV I had stored and hooked it up outside my home theatre room, and it worked well. Maybe mine is a rare case, but I wonder with less expensive or older HDTVs, will Playbar work every time. Hopefully FAQs will quickly appear documenting the few TVs that won't work with Playbar, so you don't have to order something that has a very low but possible chance of not working with your TV...

All in all, I really love the Playbar concept, and wish, oh wish, it had worked in my main home theatre room. The sound quality is great and setup is a breeze. Now to convince my wife I need a new TV for the living room?!
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

30 of 35 people found the following review helpful
5.0 out of 5 stars If you love Sonos, this is the Soundbar for you.... and if you haven't tried Sonos... this is still the soundbar for you!, December 9, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
If you're like me, you have probably scoured the Internet looking for the best over all soundbar, with the best value for the money. Something that will give you as close to a actual surround sound experience as possible, but be aesthetically pleasing enough to keep the wife happy. I can honestly say that the Sonos Playbar is it for me.

I recently purchased the Playbar and have it connected to a blu-ray, xbox, and cable box.
While I do think a Sub would make it sound even better, I have to say that I am extremely happy with the quality the soundbar alone gives. The sound quality is amazing! Nice, clean detail in the audio, with a great low-end without a sub.The speech enhancement feature is great for sports or content with a lot of dialogue, and the bar programs to your existing remote perfectly. The set up is cake and the size/look is perfect for my entertainment stand.

I have owned a Sonos Play3 for over a year now and am totally sold on the way they perform. I mean, bluetooth is great, but Sonos is a far superior product to your average bluetooth speaker or soundbar. Quality, content, range, expandability, independent room control. It's all there with Sonos. I knew that I wanted to incorporate this into my home theater system as well, but I initially had some concerns with the Playbar.

If you have done your research on this soundbar, then you probably have heard of the complaint that it only has one optical input and makes you pass all of your audio through your T.V. when using multiple sources. Most all T.V.'s can only output a PCM(digitally processed) audio signal, which basically means you're losing a good bit of quality. This comes into play majorly if you want true channel separation or are looking to incorporate a sub and rear channel speakers to this system. While, you may be happy with the quality you get by connecting the soundbar this way(it's certainly going to be far better than any T.V. speakers), I wanted to use this soundbar to it's full potential.

The solution? Get yourself a optical switcher that will let you bypass the T.V. and run all of you sources directly to the switcher. The output of the switcher will run to the soundbar, giving you amazing audio. I purchased the C2G Toslink Digital Audio Switcher off of Amazon for $40. It passes full 5.1 audio, thus giving your playbar a true 3.0 signal to work with. Your channels will be separated, clear, and it makes a HUGE difference. If you decide to grow your system with a Sub and rear speakers, (which I do) this switcher will make an even bigger impact.

Now, I've seen all the arguments...."I shouldn't have to buy another piece of equipment to make this $700 soundbar work", "Sonos should have designed it with more inputs", and "Sonos should have designed it to pass through HDMI."

The thing is... if you don't like Sonos, you won't like a SonosPlaybar. Yes It would be nice if the soundbar had more inputs, but Sonos is a company that does quality through simplicity. iPads only have one connection on them as well, and you either are an Apple person or you aren't. It's not necessarily their fault that T.V.'s output a crap audio signal. As T.V.'s progress I'm sure that they will improve on this, but for now there is a easy way around it.

For me, it was worth spending an extra $40 to unlock the full potential of this soundbar that my T.V. was hindering.
If you haven't tried Sonos, I would highly, highly recommend anyone with a reliable Wifi connection to buy this soundbar.

Now to start saving for the Sonos Sub.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

22 of 25 people found the following review helpful
5.0 out of 5 stars Love it: Here's a Dolby Digital Solution for ANY TV, May 28, 2013
PeteTechGuy (Woodside, CA USA) - See all my reviews
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
I'm a long time fan of sonos, and this Playbar is a great addition. The sound is truly excellent and the full integration with my sonos system makes this soundbar unbeatable for me. I use it along with the Sonos Sub (which I didn't need, but which makes for a mind blowing combo with the playbar.)

Among the features I most appreciate are the following:

- Sonos' ability to automatically revert to TV audio whenever the TV is turned on.
- Enhanced Speech mode making TV dialog especially clear.
- Late Night mode for softening louder sound bursts.
- The ability to use my IR remote to control the volume, AND the great full featured sonos controller apps for iphone, ipad, osx, windows, android etc. (IMO the best remote control interface ever for internet radio and total music streaming)

- Access to all my iTunes tracks, playlists, albums, artists, automatically updated every night.
- Streaming of 100,000 radio stations, so easy to to find and use with the sonos controller apps
- Pandora, Rhapsody, Spotify, and just about any other music service you could want. (I'm using Pandora and Rhapsody)
- Streaming of custom web sites by use of any streaming URL. (I use these for my stations.)

IMO, these features make the Playbar a great choice for people new to Sonos, and an obvious one for those who already have sonos.


Some folks have had issues in getting Dolby Digital from their TV optical out. Some older TV's have no optical out or no sound from their optical out when using HDMI, and some other TVs send only stereo to the optical out. See this sonos link for a list of TVs and their level of compatibility with the Playbar:

A very simple, fairly inexpensive solution to all of these audio problems, and one which has been working extremely well for me, is an HDMI Audio extractor, sometimes called a de-embedder, combined (if you have more than one source) with a simple hdmi switch. (An audio extractor is around $40. Monoprice has a 4x1 hdmi switch for $24 OR an 8x1 switch for $79, and Amazon has some good hdmi switches as well)

This solution is ideal for folks like myself, who are already using an HDMI switch, or for those using only a single source (in either of these cases you'd only need to buy the $40 audio extractor). But even if you'd have to buy an HDMI switch, this approach has some advantages over plugging all of your hdmi cables into the TV or using an integrated hdmi/optical switch:

- You need to run only 1 cable (just an hdmi cable) from your equipment location to the TV location. (eg. you can keep the hdmi switch near all of your sources, route its output hdmi cable, under the floor and behind walls, to the tv, and insert the audio extractor right by the TV and playbar. Giving you a very short convenient run for the optical audio cable.)
- Using a standalone HDMI switch, rather than TV switching, makes it much easier to add more sources in the future, eliminating difficult routing for the additional cables.
- An integrated hdmi/toslink switch will not work for sources with no digital out, such as a Roku3. This approach will.

The audio extractor I'm using is this one:

J-Tech Digital Premium Quality HDMI to HDMI + Audio (SPDIF + 3.5mm Stereo) Audio Extractor Converter .


You just plug your switcher's (or single source) HDMI output cable into this device's HDMI input instead of the TV. Connect a second HDMI cable from the HDMI output of this device to your TV's HDMI input. Connect the optical output of this device to the Playbar. Press the button to choose Digital Out and you're done.

I'm automatically getting dolby digital whenever my source has dolby digital, and stereo whenever my source has stereo. My picture quality and audio are excellent, and video audio sync is perfect. No problems of any kind. It's working well with my Roku 3, Apple TV, 2 Tivos, and a Sony BluRay DVD Player.

(Note however that, as with every other device I've seen, this unit does not convert dolby digital plus or DTS to either vanilla DD or to stereo for the digital out. If you're getting DD+ or DTS you'd have to switch that off at the source. An example of this is Netflix whose surround sound is DD+ on Roku. Because of that, I have Roku set up to give me stereo from Netflix and DD 5.1 from Amazon. Sonos is said to be working on Playbar DTS support.)

I'd seen a couple of suggestions for similar extractors but I had been unable to find reports from anyone who's USED one with the Playbar. So, if that has been holding you back, I hope this helps.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

24 of 28 people found the following review helpful
5.0 out of 5 stars Wireless Sound Perfection....Finally, March 24, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
I don't consider myself "harry homeowner" when it comes to electronics or sound. I do a lot of research and will put money into something if I believe it is a good product. I had read a ton of reviews about this product both from Best Buy, Crutchfield, and here on Amazon. It was very difficult to find anyone that would give it less than five stars.

Although I had prewired my house for surround sound, I do have one room where there is just a flat-panel TV and I had zero interest in running any kind of wires behind the wall or making a mess. That is when I started looking into the sound bars. In years past it is also been impossible to find a good sub woofer that could wirelessly handle any kind of sound and come out as a good product. So I ended up going to Best Buy to get a demo of this and see if it is what I was looking for. The other bonuses for me was I want to be able to extend this system throughout my house on a need by need basis, and I also have an iPad and iPhone and like the idea of being able to control my entire electronics life with one device. Visually...not a universal remote.

Needless to say the demo sold me. I want out of there with a sound bar, a sub woofer, And a bridge-a necessary component if you want to link everything together like I want to. I cannot say enough about the ease of hooking all of this up. An elementary school student could do it. I give it five stars alone for the entire process out-of-the-box. I have now had it up for about 15 hours in have used the crap out of it. Both playing very high sound intensive movies, watching a hockey game, and streaming music from both Pandora, XM radio, and even local radio stations. This entire system reminds me very much of Apple. Extremely powerful and yet unbelievably simplistic. And yet has enough technical aspects to it To keep a person like me entertained and give me a ton of cool options to configure.

On the iPad app alone you can individually control speakers, sounds in individual rooms, move from program-to-program, all with a touch of a button.

The salesperson at Best Buy joked with me and said you'll be back in a couple months to add on to your Sonos system. I chuckled but not only do I think he's right but I'll probably be in quicker. Awesome sound, quality, and product.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

23 of 27 people found the following review helpful
2.0 out of 5 stars Misleadingly marketed, January 10, 2014
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
The point of the soundbar is to declutter your hometheatre. Separate components of a 5.1 receiver and a sonos:connect will provide better sound for less money. So the main reason to buy this product is that it simplifies and declutters while providing a similar sound quality.

Unfortunately, by design it cannot do a very good job of the 5.1 part. The way it is meant to be used is to be plugged into your TV, so that it can amplify the audio for what you are watching. Unfortunately, almost no TV on the market can provide the 5.1 sound input the playbar requires. Without a 5.1 input, the playbar cannot provide 5.1 output. This is not a fault of the playbar, but of the HDMI spec; it can be read to prohibit TVs from providing the output the playbar needs.

In order to get the appropriate input to the playbar, some sort of HDMI switcher is needed, but now you are adding clutter to satisfy the needs of a product meant to declutter.

Sonos knows all of this of course, yet still markets this as a painless upgrade. I find that very misleading.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

21 of 25 people found the following review helpful
4.0 out of 5 stars Great Product, once you solve the 5.1 Surround Sound Issue (and here is one solution that worked for me), December 31, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
I bought the Sonos Soundbar, the Sonos Subwoofer, and two Play:3 speakers as surround sound speakers. The set up of the Sonos Soundbar, Subwoofer, and Play:3 speakers was very simple and took me about 25 minutes. However, once I had it set up I noticed that the system was not transmitting true surround sound. I learned after reading this review board and other review and message boards that the reason for this is Sonos wants you to use your TV as a hub, with all the inputs from your devices (Apple TV, Cable, etc.) going to the TV and then the optical audio out from the TV to the Playbar. However, most TV's won't pass Dolby Digital (DD) 5.1 surround from HDMI to the digital/optical audio (i.e., the Playbar), so what you get in most cases is stereo with muted simulated surround sound that is NOT surround sound from your surround speakers. Unfortunately, there is no good list anywhere that I found listing TVs that actually do pass DD 5.1, but if you have a TV that does, you are good to go (I describe later in this review how you can tell if you are getting DD 5.1 or not). However, if you are one of the many who do not have such a TV, you need a solution or you will not get DD 5.1. After many hours of research, I tried (and was successful) with the following solution:

I purchased a Shin Kin 4x2 Remote Control Digital Optical TOSlink Audio Fiber Optic Selector Switch Switcher Splitter (currently sold on Amazon for approximately $69.95).

I connected each of my devices (I have Apple TV and DirectTV) to the "Optical Input" switches (called Input 1 and Input 2) on the Splitter via a Digital Optical Audio Toslink Cable (i.e., same type of cable that came with your Sonos). This will take care of sound (and you will leave your HDMI cables connected to the TV for purposes of transmitting the video signal from your devices).

I connected the Sonos Soundbar to the output (called the "Output 1") on the Splitter.

Important - Make sure the sound settings on apple TV/your cable box/other devices are set to Dolby Digital (I had to make this change before I was able to get 5.1).

Then enjoy.

You can confirm that you have properly set things up in Sonos - go to "About My Sonos System" in the "Settings" menu, and if you look at the Playbar detail, it should read "Dolby Digital 5.1" - if it does not (i.e., if it shows "Stereo"), either the show you are watching is not Dolby Digital or you have not connected things properly. This is also how you check and see when you first power up your Sonos system whether your TV transmits DD 5.1. Try a few HD channels, as the message regarding what the Sonos is transmitting will change depending on whether the show/movie you are watching is DD 5.1 or not.

Also - I have a Harmony Logitec remote. I was able to add the switch I to the commands for my remote so I now can switch between channels on the switch using my remote and turn it off and on via my Harmony remote. Someone had posted the manufacturer name and model number in the reviews for the switch I bought but so everyone has all the information in one place to implement this solution, the manufacturer of the switch that I bought here on Amazon is Shin Kin and the model is AOS-42TR-B - if you use a different switch you will need to get the manufacturer and model number for your switch and program it in the Harmony settings. You can also add your Sonos Playbar to the devices your Harmony Logitec remote recognizes and control the sound through your Harmony remote.

Now that I have the system set up, it sounds great and the DD 5.1 sounds awesome for movies/shows/etc. that are in DD 5.1.

But for having to spend many hours finding this solution and paying additional $ for the switch, I would have given the Playbar a 5 star review - it sounds that good. Good luck and enjoy!
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

34 of 42 people found the following review helpful
1.0 out of 5 stars Doesn't Support DTS Audio = Not a Real Home Theater Soundbar, December 13, 2013
This review is from: SONOS PLAYBAR TV Sound Bar/Wireless Streaming Music Speaker (Electronics)
Until this Playbar can support DTS audio, it should be considered a waste of money. For $700 it should at least have more inputs and audio codecs for a soundbar. My Samsung E450 soundbar (worth $200) has more inputs and codecs than this thing. For a company that prides itself in modern audio technology, it sure lags behind much cheaper products like the $300 5.1 VIZIO soundbar (per CNet). If I was simply buying this for music I would rate it 4 stars, but Sonos endorses this as a home theater system, so until they fix this, it's garbage.
Help other customers find the most helpful reviews 
Was this review helpful to you? Yes No

‹ Previous | 1 245 | Next ›
Most Helpful First | Newest First


Search these reviews only
Send us feedback How can we make Amazon Customer Reviews better for you? Let us know here.