Safety 1st Alpha Omega Elite Convertible Car Seat

by Safety 1st

Product Features

• 5-35 pounds rear facing, 22-40 pounds front facing, 40-100 pounds belt positioning booster
• Convertible car seat
• Removable cup holder
• 5-point harness with up front adjustment
• Removable washable car seat pad

Product Details

User's Guide [3.37mb PDF]

• Product Dimensions: 19.5 x 20 x 25.2 inches ; 14.6 pounds
• Shipping Weight: 20.9 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B001FB5BFW
• UPC: 884392220693
• Item model number: 22456TR1
• Amazon Best Sellers Rank: #2,135 in Baby (See Top 100 in Baby)
  • #33 in Baby > Car Seats > Car Seats > Convertible
• Average Customer Review: 3.8 out of 5 stars  See all reviews (333 customer reviews)

Product Description

Color: Triton

From the Manufacturer

The Safety 1st Alpha Omega Elite convertible Car Seat offers three modes of use. You will never have to buy another car seat. It can be used as a rear facing seat for an infant, forward facing with a 5-point harness and then converts to a belt positioning booster for a toddler. Equipped with ProTech, EPP energy absorbing foam, infant head support, and 3-position recline and pivoting armrests, your child will be comfortable and safe.

Product Description

Safety 1st Alpha Omega Elite Convertible Car Seat offers 3 modes of use for an infant, young baby or toddler. This can be used in the rear-facing position for an infant or the forward facing position with a 5-point harness for an older baby and it converts to a belt-positioning booster for a toddler. The ProTech EPP energy absorbing foam makes the seat extra safe

Customer Reviews

Most Helpful Customer Reviews

305 of 313 people found the following review helpful:

5.0 out of 5 stars BEST seat for the $$$, October 2, 2007

By 

Mama_C (Virginia, USA) - See all my reviews

This seat is AWESOME. It is sturdy, easy to use, easy to clean, inexpensive, comfortable, long-lasting, and more. I had an older version of this same seat (about two years ago) and bought two of this version--the old one for my hubby's car and these two for my minivan. My two-year-old LOVES the soft, cushiony seat--she always takes her shoes and socks off to rub her feet on it, and my 6-month-old loves the extra room and freedom of the bigger seat (she got too big for the Graco carrier kind.) The tilt is very easy to use and it installs fast and quickly--with LATCH--I haven't tried any other method. They fit beautifully into both my hubby's VW Passat and my Hyundai minivan--we're both tall and still have plenty of room to have our seats all the way back and these seats installed in both front and rear facing positions. It also cleans easy--straight into the wash and cool-setting dryer.

I hope this helps you with your car-seat purchase decision. I know I was a little overwhelmed by all of the choices and price differences. This seat was $90 with free shipping (from Amazon via BabyAge, I think--got here in two days!!) when I got it. I did go to a local store first to check these out (it was $160 in the store) I found the cheaper seats (Graco, Evenflo) had thinner padding. The more expensive seats (Brittax, etc.) had lots of colors and similar padding to this seat. I don't really think the kids care that much about the colors--their butts are on them, you know? I like that this fabric seems to hide everything my two-year-old can dish out on it--and then wash easily if it gets stinky. Oh--the other thing I really like about this seat is how easily the straps adjust--I haven't seen any that are easier--if you look at the picture you'll see these little red handles at the top--you simply push/pull these and the straps slide up or down--other car seats you have to rethread the things--who has time for that!?! Also, the arm rests are adjustable--I have them up and out of the way for now--when we transition to the booster, I'm sure I'll bring them down.

Good luck!!
p.s. I've read a few of the negative reviews and have some tips--
1. For the ones who couldn't remove the infant headrest, it is very easy to remove. Unthread the belts from the clip in the rear, thread out through the front and the headrest slides off--then rethread (the instructions are in the back of the book--look under cleaning.)
2. For the tilt--for cars with bucket seats, you will need to use a prop to adjust the front of the seat when rear-facing. You can purchase a $10 adjuster, cut up a $1 swimmers noodle, or roll up a towel--all are safe--and you can ask you car service dept or safety official to help with the install (most local police departments have monthly safety seat checks.)
I still love this seat--I think it is super easy to use.

64 of 68 people found the following review helpful:

5.0 out of 5 stars Rear facing car seat - you CAN install it rear facing!!!, April 26, 2010

By 

JAH (Lincoln, NE) - See all my reviews

This review is from: Safety 1st Alpha Omega Elite Convertible Car Seat (Baby Product)

Okay....so all of these reviews make it seem impossible to install rear-facing. However, I'm here to tell you it's not.

First, let me tell you my little story of installation! I first tried installing the Safety 1st Alpha Omega Elite car seat rear-facing in my 2004 Mazda 3 using the LATCH system. I followed the instructions to the letter and also used one regular-size towel rolled up underneath it. I thought I had it in there pretty good, but I asked my husband to take a look to see if he could get it a little tighter since it seemed to move a little side to side. We both agreed that it was a little too loose and there was still quite a bit of open space underneath the car seat, which caused additional wiggle room for the car seat to move. We also couldn't seem to get the darn thing level AND tight at the same time.

We took a break from my car and my husband starting working on installing the same car seat in his 2003 GMC pickup, again using the LATCH system. (We bought two identical car seats.) He used one towel underneath, but he absolutely couldn't get it level with the ground and tight at the same time! As he pulled the seat tighter, the seat kept moving up to a sitting position rather than reclined. In fact, he pulled the straps so tight, we couldn't get the darn thing OUT either! The locking mechanism gets jammed if you pull it too tight. Thank goodness we were able to get the towel out from underneath and we detached the base from the car seat (while it was still installed in the truck), which gave us enough room to unhook the car seat from the pickup's LATCH hooks.

So, after about an hour or more of messing around with the car seat and cussing up a storm, we decided to take a break and I did a little research online. I found a video on Safety 1st's website about how to install a rear facing car seat and I also checked out several reviews to see if anyone had advice.

After watching the video, reading the instructions several more times and reading several reviews, I decided to tackle it again. First, ***I removed the base from the car seat*** and used a rolled up bath sheet(a big oversized towel similar to the one used in the video) to put underneath the car seat. The secret is to REMOVE THE BASE!!! It doesn't affect the safety at all and allows for a MUCH better fit when rear-facing!!! It took me all of 5 minutes to get the car seat secured rear-facing in my Mazda 3. And, the bath towel just basically fills the open space right underneath the lower section of the car seat. The car seat really doesn't sit on the towel at all. I did it just like the video shows and it is a secure fit. Another secret I learned from another review is to put your knee down in the car seat where the child's sits and also push straight down hard on the top of the car seat as you pull the straps tight. This will help keep it level with the ground as you're pulling it tight.

I strongly urge you to watch the video and be patient. It was a heck of a lot easier than I thought originally and all it took was for me to step away for a little while and come back to it. Five minutes, literally, to install this thing without the base attached. Give it a try! This car seat is worth it and is very secure for my 10-month old!

Good luck and best wishes to you!

25 of 26 people found the following review helpful:

5.0 out of 5 stars Worth every penny!, February 27, 2008

By 

Dootgrrl (Crockett, CA USA) - See all my reviews

Buy these at Amazon or other place online since they're almost DOUBLE the price at Toys-R-Us ($169 in Feb 2008).

We bought these car seats for our 1-yr-old (22 lb) twin boys and WE LOVE THEM!! They're really padded, cushiony and roomy, so they were very comfortable for the road trip we just took. Once I figured out how to use the hooks to attach to the LATCH bolts built-into my car (incl. in most cars built after 2002), it didn't take long to install.

They will be easy to adjust as our boys grow, and we're thrilled that we won't need to buy another car seat EVER. As a 3-in-1 car seat, they can be converted and used until the child is up to 100 lbs!

We agree that they'll be too big for small cars. In fact, our boys just barely met the limit to situate the car seat to be front-facing. If they hadn't, I don't think it would have fit in our Toyota 4Runner as a rear-facing seat.

The car seat itself isn't big. The problem is that it requires a lot of width (i.e. looks reclined) in order to be set at the safety level in the back seat.

Otherwise....we love it and would highly recommend it.

2115|R1CKEHIXZXCGI0;2115|R2P9MDZ5DCBK66;2115|R1CNWURQIYI9LS;