- Used with the Sandvik Coromant CoroCut 1-2 for internal and external grooving in all materials
- GC1125 grade is a physical vapor deposition (PVD) coating of titanium aluminum nitride (TiAlN) and chromium oxide (Cr2O3) over carbide that provides a balance of resistance to shock and wear in average machining conditions
- GF chipbreaker with a sharp cutting edge for precision grooving at low feed rates
- For use with V- or rail-shape clamp toolholders for security
- Two cutting edges for indexing and a non-handed 0-degree cutting angle for neutral cutting direction
0 items added
To add items, choose from the table below
Sandvik Coromant CoroCut 2-Edge Carbide Grooving Insert, GF Geometry, Non-Handed, Neutral Cut, GC1125 Grade, Multi-Layer Coating, 2 Edges
|Price:||$246.38 - $442.38|
|Brand Name||Sandvik Coromant|
|Chip Breaker Type||GF|
|Cutting Angle||0 Degrees|
|Manufacturer Series Number||CoroCut 2-Edge|
|Number of Cutting Edges||2|
|Size||Non-Handed, Neutral Cut, GC1125 Grade, Multi"|
This Sandvik Coromant CoroCut 2-Edge indexable grooving insert is carbide ... See more product details
This Sandvik Coromant CoroCut 2-Edge indexable grooving insert is carbide GC1125 grade and has two cutting edges, a non-handed 0-degree cutting angle, and a GF chipbreaker for neutral-cut external or internal grooving in all materials at low feed rates. GC1125 grade is a physical vapor deposition (PVD) coating of titanium aluminum nitride (TiAlN) and chromium oxide (Cr2O3) over carbide that provides a balance of hardness for wear resistance and toughness for shock resistance in average machining conditions. The PVD coating maintains a sharper cutting edge than a chemical vapor deposition (CVD) coating.
The insert has a GF chipbreaker that has a sharp cutting edge for precision grooving at low feed rates. This double-edged insert has a non-handed 0-degree cutting angle for a neutral cutting direction. It has a V-shape or rail-shape clamping groove on both sides. Tolerance of the cutting width of the insert is + or - 0.0008".
Grooving inserts are coded according to their specific cutting and application capability (e.g., N123M1-0900-0008-GM). Each section of the code represents details of the insert: hand, compatible toolholder series, seat size, number of edges, insert width, lead angle, corner radius, and chipbreaker. Generally, as the insert size becomes larger, the maximum cutting depth increases. Cutting depth influences the material removal rate, the number of cuts, and chip evacuation efficiency when using the insert. Indexable inserts are small cutting tools designed to remove material in external and internal cutting applications such as turning, milling, drilling, parting, and grooving. They are held by an insert holder and usually have multiple cutting edges that can be rotated when one edge wears down. Multiple inserts can accomplish a variety of cuts in one operation.
Sandvik Coromant produces tools for turning, milling, and drilling. Headquartered in Sweden, the company manufactures tools used throughout the metalworking field, including the automotive and aerospace, die and mold, and general engineering industries.
Matching Inserts to Holders
These inserts are used with the Sandvik Coromant CoroCut 1-2, an indexable holding system for internal and external medium to deep parting, grooving, and profiling operations. The V- or rail-shape design of the toolholder provides secure clamping.