[...]
I have read many many reviews about this camera and have looked at countless videos on YouTube about it. Radio Shack has a lot of reviews about it too.
Hopefully I can say something that hasn't been covered yet about this camera. First of all, there is a video cable that connects the camera directly to a HDTV. The number of the cable is
Sanyo VCP-CPNT01U Component Output Cable for Sanyo WH1, TH1, CA9, CG10 Camcorders, and Amazon sells it for $[...]. The cable is shown on page 159 of the manual.
Turn OFF the NOISE REDUCTION. To do this go to MENU 2 under the WRENCH MENU. It is actually the 5th MENU down. Go to NOISE REDUCTION, push SET, Then select OFF for both VIDEO NR and PHOTO NR. Push the MENU button to get out of there. I have never found a Noise Reduction on any camera that makes the pictures better. It usually degrades the quality of the pictures.
As others have said, put the FOCUS MODE to SPOT.
A good software program is AVS4YOU. Search for it. It is free to try and does a good job of playing and converting MPEG4 files to AVI or whatever.
Here is what I like about the camera:
You can join clips or cut out video with the camera in the playback mode. Manual PG 104-112.
You can take up to 11 pictures in sequence in the 10mb Photo mode. Pg 85 in the manual talks about that. To be direct, go to MENU, PHOTO, hit SET, Scroll down to 10mb burst mode, which is down past the .9meg picture selection. Just keep going down till you see it. It works great. Be advised it does not work with flash.
You can also put SEQUENTIAL (I don't know why they don't call it BURST) in your SHORTCUTS MENU. Page 128 in the manual. To do this go to MENU, then scroll down on the left side to MENU 2 under the WRENCH MENU. That is actually MENU 5 down from the top. Select SHORTCUTS, then SEQUENTIAL and push the SET button. Now once in the camera mode all you have to do to get Sequential is push the SET switch up. Pushing it up again puts you back in normal photo. Be advised if you have the photo set to 10mH (High) once you come out of the Sequential Mode the camera will go back to 10mS (Standard). To fix that you must go back to MENU 1, PHOTO, then select 10mH again.
You can take a photo just by pushing the PHOTO button while shooting video. Pg. 67.
It may not be a big photo file, but it works.
You can delete 1 picture, selected pictures, or all pictures in the camera. You can print from the camera. You can use the camera with the cable as a card reader. pg 145 of manual
I have found that using all the optical zoom, you can use 1/3 of the digital zoom and still get a good looking picture. I took a picture of my wife at 125 yards and could read the lettering on her shirt using the optical zoom and digital zoom at max. I am not saying this is the best thing to do, but in some situations that is the only way to get the shot. Optical and digital zoom max is 60X. The quality wasn't all that bad.
Macro goes down to .39 inches. You do have to set it to SuperMacro focus in the menu though.
To do that go to MENU, FOCUS, then select SUPERMACRO. Then push MENU to get back to the camera mode.
The ISO goes from 50 to 1600. Your best picture will be in the 50 to 100 ISO range. The higher the ISO, the more the noise in the photo/video. I noticed leaving the ISO in Auto is sometimes a mistake. I was going to take a picture and I knew the flash would go off. It was somewhat dark, but not very dark. When I looked at the screen the picture didn't look all that great. It was grainy and I could tell the Auto ISO setting was pretty high. I manually set the ISO for 100 and it totally cleared up the screen. I took the picture. It came out great. It was a little darker than I wanted, but the picture looked clear. I brightened the picture up with Photo software and the results were outstanding. While looking at the screen, you can adjust the ISO and instantly see how it is going to affect your picture. In some situations it is better to take charge of he ISO and set it manually.
In taking a photo, pushing the button half way down causes the camera to focus. Pushing it the rest of the way causes an almost instant shot with very little delay.
You can use the camera as a PC camera (like a monitor camera for your computer). Pg 150
In watching a video in playback, if you pause the video an image can be taken by pushing the PHOTO button. Pg 73.
There are a couple of things I don't like about the camera. One is the battery, but you can buy them on EBay. Search for "DB-L80 Battery". I found them for just over ten dollars for two. They are cheap and in most cases it also includes shipping. The battery that comes with the Sanyo is a 700mAh (Mili Amp Hour) battery. The two that I bought on Ebay are 980mAh. That means they are stronger and will play longer. They work great. So the battery isn't really that much of a problem after all.
The camera has a flimsy latch that covers the SDHC card. It is really flimsy. As a result, I just use the supplied cable and plug the camera into the USB slot on my computer to download files instead of taking the SDHC card out. The camera asks you if you plan on using it as a reader when you plug it in. Just click SET on that and the computer sees the drive instantly.
The last thing I don't like about the camera is the lack of a strap. I don't like holding a camera without something keeping it from hitting the ground if dropped. I found a couple on Amazon just doing a search under CAMERA STRAP.
Nikon AN-CP14 Replacement Strap or
Canon Metal Neck Strap 1 for All Elph Cameras, 34" Length. The cost is real cheap for either the metal necklace or the wrist strap.
Well that is it. I hope you enjoyed my review. Take care and get the camera. It is awesome for the price. I wish I could afford the
Sanyo Xacti VPC-HD2000 "Dual Camera" with 8MP & 10x Optical Zoom "Full HD" 1080p Pocket Video Camera.. Wow, what a camera, but for $[WOW!]?
Oh, one last thing, the case. I found a really good cheap case for the camera. It is a
Tamrac Explorer 15 (Model 5415) Compact camera case for slim-line cameras. The price is small and the shipping is free. The case is small, but the Sanyo fits in it perfectly. The front pouch is big enough for extra batteries.
At night, set the ISO to 1600, and the Sensitivity to HIGH. That is the best this camera can get in low light conditions. With the lights on in the house the camera did ok. The video was bright and looks good.
At night another accessory might be the answer. It is a video light. I have one and it works really great.
Sima SL-20LX Ultra Bright Video Light (Silver). It works for about an hour before giving up the ghost. In most cases that is plenty of time. It comes with a bracket that mounts to the Sanyo. I found that mounting it catty corner (about 45 degrees) on the left side of the camera works really well. It is not in the way of the screen but right out there to provide the quality of light you need. Mounting on the right side interferes with your hand in holding the camera. Mounting it on the left side will not let the screen open fully. You have to mount it at about 45 degrees on the left side and then all works great. The light is really bright. I found that setting the ISO on 100 gives a great picture but the light only lights up clearly about 7 feet. If you need more lighting than that, set the ISO higher. Setting it at 1600 made the light really bright, and it made the whole area bright for the video. Maybe 1600 is the best place for this light. You have to experiment with it.
Addition:1/1/2010
Someone emailed me and said the video was shaking using Quicktime. It is jerky. If you have this problem there are several solutions. One is to download AVS4YOU. It is a free trail but the program costs money. Another is to download ACDSee Pro 3 but you have to pay for it too. The third solution is to download the latest version of Windows Media Player (version 11). The link is posted in the COMMENTS Section of this review. You must also have the CODEC that goes with Windows Media Player to play the MP4 extension. Do a search on Windows Media Player CODEC on Google. Select the link that says "Media Player Codec Pack, Free software downloads and software" The link is posted in the COMMENTS section of this review. That should solve your video shaking problem.
To force Windows to use Windows Media Player to play your video files, go to the directory where your video files are located. Put the curser on one of the video files and right click on it. Select PROPERTIES and click. On the screen near the top you see the OPENS WITH then the box CHANGE. Select CHANGE and scroll down till you find WINDOWS MEDIA PLAYER. Click on that then click OK. Now at the bottom of the page click APPLY then OK and you are set.