*** Hole Cutter may be damaged by nail strikes *** Blue Boar Self-Feed Multipurpose TCT tungsten carbide hole cutters with 2-1/4" cutting depth are perfect for cutting hard and soft woods, laminates, acrylics and plastics, plaster, OSB, MDF, fiberglass, chipboard, sheetrock, Hardie fiber cement board, plywood, chipboard, fand fiber reinforced composites. ****
These TCT hole cutters will outperform and outlast dozens of ordinary self-feed bits (and without the mess) or bi-metal hole saws (without the time lost prying out the cut plugs). Use a single hole cutter for every material on the job site.
Aggressive cutting tips and the ability to cut almost every building and construction material makes short work of any project. The rake of the TCT teeth and the drop shaped chip clearance slots allow for easy removal of plugs making for an uninterrupted drilling process
The 2-1/4" cutting depth enables its use for cutting through strapping and joists without ship auger drill bits. Quickly mounts to any standard 3/8" arbor or the Hole Pro XL Arbor for use with Hole Pro dust shields to trap the dust and shavings and control the cutting depth.
The design of these TCT hole cutters enables drills rated for 3" maximum hole sizes in wood when using a bi-metal hole saw, can easily cut holes up to 6-1/4" diameter in the same materials using the Blue Boar TCT hole cutter.
Use with any 2-pin style hole saw arbor with 5/8"-18 thread
** For NAIL FREE materials ***