Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor

by Senco

• Lightweight and portable--easy to carry from site to site as you work
• One horsepower peak ,1/2 horsepower runningand one-gallon capacity
• Ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts
• Delivers 20 to 44 drives per minute
• Backed by a one-year warranty

Product Description

Amazon.com

Designed especially for finish and trim work as well as a variety of crafts and hobbies, the Senco PC1010 Compressor is a lightweight and ultra-quiet choice. This 1 HP compressor offers high performance in a compact, portable package and provides ample pressure for a wide range of small to medium jobs that require the use of pneumatic tools.

The Senco PC1010 Compressor: Is easily portable at just 20 pounds. Delivers 20 to 44 drives per minute. Offers durability thanks to an aluminum cylinder.

The PC1010 is easily transported from site to site. View larger.

With 1 HP of power, the PC1010 lets you easily install door casings and floor molding.

Lightweight and Portable for Easy Maneuverability
Weighing in at just 20 pounds, the PC1010 is easy to carry from site to site as you work. And because it measures a compact 12.5 x 10.3 x 14 inches (WxHxD), it's ideal for jobs with limited work space. A cushioned handle grip makes it comfortable to carry and hold, and its compact size also means it won't take up too much room in your shop.

Efficient, Mess-Free Operation
Capable of delivering 20 to 44 drives per minute, depending on the tool and application, the PC1010 features a direct drive motor/pump that provides extra-efficient operation for a variety of jobs. And the pump is lube-free, which means you won't have to worry about the mess and disposal issues involved with working with oil. An aluminum cylinder offers reliable durability.

Versatile Enough for Both Professionals and DIYers
With a one-gallon capacity, the PC1010 is ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts. Additionally, it takes only 128 seconds to pump up and 35 seconds to recover, so you won't waste valuable time waiting to have enough power to complete your jobs.

Significantly quieter than pancake compressors, the PC1010 makes very little noise while running, so you won't have to worry about disturbing neighbors or waking napping babies while completing in-house jobs. And its rubber-covered feet won't scratch hardwood floors, so you can feel comfortable using it in your home.

The PC1010 is backed by a one-year warranty.

About Senco
For over 50 years, Senco Products, Inc. has provided high-quality products to make it easier for both professionals and remodelers to complete a wide variety of renovation, construction, and industry work. Based in Cincinnati, Ohio, with distributors worldwide, Senco is one of the leading manufacturers of pneumatic and powered fastening systems, as well as the fasteners they drive. Their tools boast superior workmanship and are used in a variety of industries, including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging.

What's in the Box
Senco PC1010 Compressor, regulator, pressure gauges, 1/4-inch universal coupler, and air filter.

Product Description

Includes PC1010, 1 Gallon Electric Oil-Less Hand-Carry Compressor - PC1010

See all Product Description

Most Helpful Customer Reviews

174 of 175 people found the following review helpful

5.0 out of 5 stars Easy on the arm! November 3, 2006

By Bob Hagen

As a general contractor I have several compressors. At least 90% of the time I grab an Emglo because they do everything I need except texturing. But I've grown fond of this little Senco WHEN IT IS USED PROPERLY! That means if I have a small trim project or a VERY small framing project it does the job, and both takes up less room and is a lot easier to pack around. It'll drive 3" framing nails no problem...when the tank is topped off, but the last couple nails before the compressor cycles always need to be hammer finished. Same is true for 15 or 18 gauge finish nails. When the tank is just about to cycle the nails don't completely set. My workers love the Senco...much to my chagrin. For one, it's light, and second...it takes FOREVER to refill (relatively speaking) and my guys love to stand there with their thumbs you know where taking a break every 10 to 15 nails or so! So if used for small jobs...or trim where you nail one piece at a time while cutting, well then it's a champ. But if you tend to cut trim for an entire room, then want to shoot it on quick...this Senco will frustrate you no end. You end up hand nail setting too many nails, or else you have to stop frequently, unhook the air hose, drain a little air from the tank until it cycles, then wait for the darn thing to fill. If you use it right... 5 stars. If you use it as your go to compressor... 2.5 stars tops. I hope this helps!

181 of 183 people found the following review helpful

4.0 out of 5 stars Have compressor will travel February 5, 2004

By Wilbur Wong

This is a great second compressor. I wouldn't buy this as a primary or first compressor but it works fine to support small nail guns. My other portable weighs 68 pounds and will keep up with 1 to 2 framing or roofing nailers. My shoulders ache from the number of times I have lugged it up 78 steps to a job site. This goes anywhere with a bunch of tools in the other hand.

Other than nail guns, NO it won't do much at 0.7 cu ft per min when paint spray guns need 10 times that, and a blow gun will empty the tank in 10 seconds or less. But seriously, this compressor gives me at least 10 shots from my 16 ga finish nailer before the motor kicks in; a couple more off of an 18 ga finish nailer, and as an acid test, I got 3 shots from a 3 1/4 inch framing nailer (not recommended but if all I need is 10 nails I'd rather carry this in - especially considering that my ripe old age keeps me from doing much serious hammering!)

Last word, the first one I received had a leaky reed valve and it had to be replaced by Amazon - I'm very happy with the replacement and have used it on several job sites.

75 of 76 people found the following review helpful

5.0 out of 5 stars nifty little trim compressor December 4, 2004

By Scott Freeland

For my applications of easy carry in and out, it's been terrific for lightweight 18ga. finishing.

On a small renovation project yesterday, 4 doors jambs and trim were easy (1" to 2" 18/16ga brads) The very least of my problems was waiting for the little Senco to catch up. Been using it for about 5 months, shot about 10,000 brads. So far it's been flawless.

Very low noise as compressors go, and neat little rubber suction feet that keep it from skidding around and marring up a nice floor.

36 of 38 people found the following review helpful

5.0 out of 5 stars The Quietest Small Air Compressor October 8, 2005

By Gene A. Townsend

Amazon Verified Purchase

I purchased this model based on web search results showing it to be the quietest (69dB) small (1 CFM) air compressor on the market, and generally high satisfaction of other owners. It is indeed very quiet, well made, and lightweight.

I've mounted this compressor in an acoustic chamber that I designed to further reduce the noise, and it is now as quiet as the "super silent" compressors used for indoor craftwork (airbrushing) that cost $600 to $1000 (49dB). At this further muffled sound level, I can operate the unit all day long sitting next to me without discomfort.

I highly recommend this model for indoor craft work. I've used mine for 40 to 50 hours and had no troubles, but feel this unit will hold up for a long time. I will use this in my home for a few hours per day.

22 of 22 people found the following review helpful

5.0 out of 5 stars Outstanding value - know it's limitations February 15, 2009

By Jim P.

I purchased this compressor after actually using one on a jobsite. A fellow trim carpenter had recently purchased one and allowed me to try it out. WOW !
It is extremely quiet and an absolute pleaure to carry around !!! I normally run a Senco 15 gauge trim gun along with a Senco 18 Gauge nailer and a Grex micro pinner. Most of my work involves hanging and trimming doors/windows, crown mouldings and chair rail work.
The compressor will power all three guns - one gun at a time. I read reviews on this site all the time where reviewers complain about a tools lack of power. IT IS A ONE GALLON COMPRESSOR !!! You can't run a framing nailer with it and even with the 15 Gauge nailer you have to take your time and allow the compressor to refill after 5 or 6 shots!
The trade off is that it is LIGHT and QUIET ! If you have to go one hundred miles an hour, you're probably not doing a quality job in the first place.
This unit shipped from Amazon by FedEx and arrived in a double carton without any damage plus FREE SHIPPING !
If you need a small jobsite compressor for trim work or punch-list items - look no further. It is a pleaure to use. Just remember - it's not designed for speed !

20 of 20 people found the following review helpful

5.0 out of 5 stars Preliminary testing is 5 stars December 26, 2012

By Jonathan Brett

Amazon Verified Purchase

I am a kitchen & bath remodeler, and have yet to use this on the job. I have, however, done some preliminary testing in my garage tonight. The results are stated below.

My first impressions are all positive: Better quality than expected at this price (great value). Smaller (better) than expected. Quieter than expected. Now for the tests.

Quantity of nails shot with various nail guns before motor kicked on, using this Senco PC1010:
23 gauge = 20
18 gauge = 10
15 gauge = 5
Framing nailer = 3

To give a comparison to a larger pancake style 4 gallon 1.5 HP Campbell Hausfeld that I have been using for 15 years, which weighs more than twice as much (52 lbs.):
18 gauge = 40
15 gauge = 18
Framing = 13

Obviously, these numbers coincide with the number of gallons of compressed air, as the 4 gallon unit delivered approx. 4 times more nails than the 1 gallon unit. No surprise here.

Recovery time (time from when motor first kicks back on while nailing, to when tank is fully charged and motor stops, with no nailing during this time) = 32 seconds. By comparison, my Campbell Hausfeld takes 30 seconds. It has a much larger motor, but it is having to compress 4 gallons of air instead of 1 gallon. Again, no surprise here.

Noise test:
I did two tests on both, this Senco, and my old Campbell Hausfeld. First I put my decibel meter right up next to the motor, and then I moved the meter to 3 feet from the motor. Here are the results:
Noise level, in decibels, at motor:
Senco = 83, Campbell Hausfeld = 99
Same test from 3 feet away from motor:
Senco = 69, Campbell Hausfeld = 80

From what I understand, 10 decibels = double the sound.... Therefore, the Campbell Hausfeld is more than twice as loud. I believe this is accurate based on standing next to each unit.

My primary reason for wanting to change compressors was to reduce weight. I feel that having fewer gallons of compressed air immediately available is a small price to pay for having a compressor that is not only less than HALF the weight and size, but MUCH quieter as well. Especially given that my primary use will be with 23 & 18 gauge nailers.

This is NOT the kind of compressor you want for doing a lot of 15 gauge nailing, and certainly not for framing. It will drive them just as powerfully as any large compressor - after all, 125 psi is 125 psi - but it simply will not be able to keep up with mass nailing using this size gun. Need to install a couple pre-hung doors? No problem. Need to build a partition or two for that kitchen remodel? No problem. But don't even think about trying to use this, and expect it to keep up, if framing a house all day long, or roofing a house. It was not designed for that. Buy the tool that meets the need and rate it accordingly.

Note: I realize that my comparisons with the Campbell Hausfeld are not an apples-to-apples comparison. I just wanted to offer this info for anyone who may be wanting to change from a pancake style to this little Senco. I figured that since the pancake models were so popular that this comparison might be of help.

I will try to report back after I have used it on several jobs. Time will tell if this little gem can maintain it's 5 star rating. This was my first Senco tool ever purchased. I have a feeling it won't be my last. Very impressive, so far.

6 MONTH UPDATE: After using this product for the last 6 months, for my kitchen remodeling business, I maintain my rating of it. It has been a GREAT little compressor for all my nailing needs. It handles ALL of my trim needs, as well as the occasional building of a wall or two with a framing nailer. I love this compressor much more than I did the larger pancake compressor that I had used all those years. Read more ›