Simpson Strong-Tie Epoxy-Tie Crack-Pac Crack Repair Adhesive ETIPAC10 Injection Epoxy

by Simpson Strong-Tie

Product Features

• Dispenses with a standard caulking tool, no dedicated dispensing tool needed
• Low viscosity, Non-shrink, Conforms to of ASTM C-881 Type I & II, Grade 1, Classes B & C
• Clean and easy mixing; no additional tools required
• Chemically bonds with the concrete to restore strength
• Resistant to oils, salts and mild chemicals

Product Description

The Crack-Pac® two-part, high solids, low-viscosity crack injection epoxy is designed to repair cracks in concrete. The mixed adhesive has the viscosity of a light oil and a low surface tension which allows it to penetrate fi ne to medium width cracks. Resin is contained in the cartridge and hardener is contained in the nozzle. Once the nozzle is threaded onto the cartridge, the hardener is released into the resin-fi lled cartridge by turning the knob at the base of the nozzle. The two components are mixed by shaking the cartridge. APPLICATION: Suitable for repair of cracks ranging from ą???" to ą??" wide in concrete walls, fl oors, slabs, columns and beams. Can be used to inject cracks in dry, damp or wet conditions with excellent results. Not for use in actively leaking cracks. SHELF LIFE: 24 months from date of manufacture, unopened USAGE TEMPERATURE: In order for components to mix properly, the resin and hardener must be conditioned to 60°-80°F before mixing. STORAGE CONDITIONS: For best results, store between 45°F - 95°F COLOR: Resin - blue, hardener - clear, mixed: light amber. The color of epoxy will change from amber to blue during the cure process and then fade back to light amber within a few weeks of installation. CLEAN UP: Wipe up with cotton cloths. If desired scrub area with abrasive, waterbased cleaner and fl ush with water. If approved, solvents such as ketones (MEK, acetone, etc.), laquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling fl ammable solvents. Solvents may damage surfaces to which they are applied. Cured material - Chip or grind off surface.

Product Details

• Item Weight: 1.4 pounds
• Shipping Weight: 2 pounds
• ASIN: B005MYXIIK
• Item model number: ETIPAC10
• Amazon Best Sellers Rank: #4,066 in Home Improvement (See Top 100 in Home Improvement)
  • #6 in Home Improvement > Hardware > Adhesives & Sealers > Epoxies