Skil 2887-05 18-Volt Cordless 2-Speed 3/8-Inch Drill/Driver w/Bit Index, 2 Batteries, Charger, and Case

Other products by Skil

Product Description

Amazon.com Review
No workshop or tool box is complete without at least one dependable and powerful cordless drill/driver. Skil's 2887-05, 3/8-inch keyless chuck drill/driver has a two-speed gear box that allows the user to shift from high speed drilling to high torque for driving screws or bolts. The gear change lever is located on top of the tool housing above the two-finger variable speed trigger. The forward/reverse switch on this drill is located just above the trigger so that you can switch direction without changing your grip, and there is a forward/reverse indicator light on top of the housing. There is a built-in bit storage compartment on top of the housing. Especially handy is the built-in bit index No more guessing at which bit is needed for which screw. Simply place a screw in the index and you'll find the bit size you will need. The 2887-05 also comes with a removable side handle for added two-fisted leverage when drilling or driving on high torque.

The drill/driver is powered by an 18-volt Ni-Cad battery which gives the user superior power and extended battery life. The battery slides easily onto the bottom of the tool giving the drill/driver optimum balance. Included with the 2587-05 is an extra battery, a one-hour charger and carrying case. --C. Dwight Barnett

Product Description
- 2-Finger Variable Speed Trigger - Battery Charge Indicator - Bit Index accurately matches drill bit to screw size - Forward/Reverse Indicator shows drilling direction - Side-assist Handle for controlled, accurate drilling - Soft Grip ergonomic grip for comfort and control - Two Speed Gear Box Specifications - Battery - SB18A 18V Slide Pack Battery - Certification - cULus - Charger - SC118 1 Hour Charger - Chuck Size - 3/8" Keyless Chuck - No Load RPM (Revolutions per Minute) - 0 to 350 / 0 to 1,400 - Speed - Variable Two Speed - Voltage - 18V Includes - 1-Hour Quick Charger - 2 Batteries - Carrying Case

See all Product Description

Product Details

• Shipping Weight: 11 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Note: Gift-wrapping is not available for this item.
• ASIN: B0000C6DXL
• California residents: Click here for Proposition 65 warning.
• Item model number: 2887-05
• Average Customer Review: 4.3 out of 5 stars See all reviews (42 customer reviews)
• Amazon.com Sales Rank: #932 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in these categories: (What's this?)

  #1 in	Home Improvement > Power Tools > Cordless Tools > Drills > Drill-Drivers > 18-Volt
  #9 in	Home Improvement > Power Tools > Drills > Cordless Drills
  #17 in	Home Improvement > Home Improvement Outlet

• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

67 of 68 people found the following review helpful:

5.0 out of 5 stars A real workhorse, July 15, 2005

By	Kizar Sozay (Yucaipa, CA) - See all my reviews

I have been using this for about six months and have almost retired my 110v drill. With two batteries, I never get a break between jobs and this drill has power to spare. I have been putting up a wooden fence on top of a concrete block wall and this thing outperforms my expensive 110v B&D. After only three 3/8" x 2 1/4" deep holes in the concrete, the AC drill was getting hot. The Skil worked right through without a complaint. The Bosch masonry bit isn't bad either. Additionally, I was drilling 1/2" holes in redwood plate and 1/4" holes in eighth inch metal strap as part of the masonry drilling. When drilling the metal and the bit first pokes through, the drill almost torques out of your hand. I did three battery changes for a day's work. The batteries charge quickly but, as a hint, fully drain the battery before recharging and let it cool off before putting in the charger. This applies to all DC tool batteries. The on-board bit carrier isn't much of a feature but its there if you need it. The drill is lighter than most DC tools costing much more, is well balanced and, at the highest torque setting will drive 3 1/2" screws into studs without maxing the clutch.

65 of 67 people found the following review helpful:

5.0 out of 5 stars Amazing Value, January 26, 2004

By	Lawsons (New Jersey) - See all my reviews

I've been using supercheap 18-Volt drills (Power-Craft, Aerotec, etc.) that you can get on other sites for $30. After going through 3 of them, I finally decided to go with a name-brand. The difference in quality is unbelievable, and the price difference isn't that significant when you factor in the extra battery. I'm sure that Skil doen't even compare in quality to Dewalt, Milwalkie, and the other big "professional" names, but those names are twice as much, and for my purposes, this thing is perfect.

16 of 16 people found the following review helpful:

5.0 out of 5 stars Great performance, amazing value, June 8, 2007

By	Craig Luna "jikester" (San Jose, CA USA) - See all my reviews (REAL NAME)

I bought the Skill 2887-03 as part of a combo set including the drill/driver, circular saw, reciprocating saw and jigsaw. Needless to say, I've been extremely pleased.

I put hardwood flooring on three floors (2000+ square feet) and used the set extensively. From cutting plywood for the subfloor and underlayment with the circular saw to making curved cuts in the hardwood with the jigsaw. The drill/driver was used to screw in over a thousand screws to secure the underlayment, drill numerous holes, stir paint, mix mortar for the tile, etc. And with two batteries, you'll be able to have one charging always ready to go. The only corded tools I used for this project were my compound miter and jamb saw. Everything else was done with the cordless Skil combo set.

I was so pleased with the tools, I bought two more sets, one for myself and one for my dad for father's day.

Highly recommended.