Snap-on Industrial Brand CDI Torque 2503CF-II 1/2-Inch Drive Computorq II Electronic Torque Wrench

by Snap-On

Product Description

From the Manufacturer

This CDI Torque 1/2-Inch drive Computer II electronic torque wrench is a state of the art digital programmable torque wrench. It has many applications, including precision torqueing of critical fasteners, tracking applied torque for quality control testing, as well as destructive component testing. It is easy to program using the soft touch keypad. Simply program a target torque including upper and lower limits, and the wrench will signal with a beep when that torque setting is reached. If the user exceeds the target torque, an alarm tone sounds and the red light flashes. Up to 4000 torque values can be stored in its memory and there is downloading capability to a printer or computer data logger. This electronic torque wrench has a 1/2-Inch drive and has a torque range of 300 to 3000 foot pounds.

Product Description

Down Loading Capacity Computorq II is equipped to down-load individual torque values or store values in memory which can be directly down-loaded to a printer/computer or datalogger via RS232. Selectable Modes of Operation "Peak Hold" and "Track" modes of operation are standard. Computorq II's electronics are far superior to our competitors in capturing real torque value in "Peak" mode . Easy Set-Up Target torque values (high and low percentage, +/- tolerances and torque engineering units) are easily programmed through the keypad and shown on the LCD. Quality Construction Proven industrial quality. Designed for continuous use. Batteries A 9V alkaline battery is standard and provides enough power for 60 hours of operation. A "LO BAT" indication on the display signals for replacement. Accuracy +/- 1% From 20-100% of scale +/- 1%, plus 5 increments, from 10 -20% of scale. Baud Rate The baud rate for downloading to a printer/computer/data logger is selectable. The factory set rate is 1200. Options are 300, 600, 1200 2400, 4800, 9600 or 19,200. Cables: P113 - 50 - TO 9 PIN PC P113-60 - TO 25 PIN PC. Computorq-II Audio/Visual Indicators. Computorq II wrenches are equipped with both audio and visual signals in addition to the torque information supplied on the LCD. Audio Signal: An audio signal is emitted when the minimum acceptable standard indicators of high and low preset torque value is reached or the upper torque limit is exceeded. Visual Indicators: Bright green and red LED's are standard indicators of high and low preset torque limits. Over-Load Protection: The red LED flashes, the audio buzzer sounds and "OVER" is displayed on the LCD when the torque range of the wrench is exceeded. Earpiece Option: An external jack for remote earpiece signaling in noisy working environments is available as an option.

Product Details

• Shipping Weight: 4.4 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B000KL4H4Y
• Item model number: 2503CF-II
• Amazon Best Sellers Rank: #588,186 in Home Improvement (See Top 100 in Home Improvement)