Our 10" high velocity fan can be wall mounted to allow for space saving fanning almost anywhere. Used for a desktop/table fan its design is quiet and compact, with rubber feet to eliminate scratches as well as fan vibration. 180 degree pivot head allows fan direction to be changed without relocating the fan, and three fan speeds provide optimal comfort. The large control dials offer simple operation to give you a no-brainer breeze.
A good fan can make the difference between a sleepless and a restful night. Soleus Air's FT2-25-03 10-inch table fan has three speeds and a five-finned blade--five fins move more air than the traditional four--to help make a hot, stuffy room feel much cooler. The fan head is anchored on top and bottom like a globe, allowing it 180 degrees of rotation, and the fan grill can oscillate to push air into a wider area.
The FT2-25-03 table fan has a modern look to it, with an asymmetrical, crescent-shaped stand that curves around the circular fan head. It's built of heavy-duty silver plastic and has blue-gray detailing. It sits on two rounded feet; there are wall-mounting screw brackets on the underside of the feet. Speed selection is made with a sliding knob on the side, and there's a simple on-off toggle for the oscillation. The power cord is 5 feet long, which can be especially helpful when using the FT2-25-03 as a wall fan.
To use as a wall fan, mount two screws vertically to a wall at a distance of 7-5/6 inches from each other, and use the two wall-mounting screw brackets in the bottom of the feet. Always unplug fan before cleaning; use a soft cloth, dry or only slightly moistened, and towel or allow to air dry afterward. Do not allow water to drip on or enter fan housing. The 115-volt Soleus Air FT2-25-03 table fan measures 14-1/2 by 14-1/2 by 6-1/2 inches, with a 10-inch fan head. Soleus Air offers a 1-year limited warranty against defects in material and workmanship under normal use conditions. --Garland Withers