Sony RM-AX4000 Home Theater Remote Control

by Sony

Product Details

Product Manual [1.61mb PDF]

• Product Dimensions: 6.5 x 8 x 2.5 inches ; 1.2 pounds
• Shipping Weight: 2 pounds
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B000B6KXM8
• Item model number: RMAX4000
• Batteries: 4 AA batteries required.
• Average Customer Review: 3.6 out of 5 stars  See all reviews (106 customer reviews)
• Date first available at Amazon.com: October 2, 2001

Product Description

The RM-AX4000 remote control comes with Sony's easy to setup PC software. It's the perfect remote control for today's home AV system, consolidating multiple remote controls into one. Exciting and convenient, this remote features an XPRESS Function for executing a series of commands, and enabling you to operate several AV components just by pressing a single key. The RM-AX4000 also controls up to 16 components, and with the Sync-up Key, synchronizing operational status on remote and alternate components is done with ease. Also featuring Tivo™/DVR functionality and an illuminated LCD touch screen allows you to highlight and view your choices. Being in the driver's seat of your living room sofa is made easy with the RM-AX4000 Home Theatre Remote Control from Sony.

Customer Reviews

Most Helpful Customer Reviews

68 of 70 people found the following review helpful:

3.0 out of 5 stars Great remote, poorly implemented software..., October 8, 2005

By 

D. Lloyd (California, USA) - See all my reviews
(REAL NAME)   

This review is from: Sony RM-AX4000 Home Theater Remote Control (Electronics)

Added to original review on 5/11/2007. **THERE IS NO VISTA USB DEVICE DRIVER FOR THE RM-AX4000** Upgrading our home computers to Windows Vista Ultimate 64-bit Edition has rendered this remote control useless.


I recently purchased a RM-AX4000 to replace my existing Sony RM-AV3000 universal remote and hopefully *FINALLY* have a single unit to replace my seven currently used remote controls...

The remote control itself is well designed, has a nice display with a blue backlight, and is well built with a silver brushed metal front panel and rubber buttons.

However, the included software works reasonably well but could be a lot easier to use.

Initially I setup the unit without using the PC based software by inputing the four digit preset codes for each component. This worked but gives basic functionality and no macros (which Sony calls "XPRESS Functions").

Using the included software to configure the remote requires that you run a wizard which steps you through configuring the unit. I found that it worked better to use the preset codes rather than trying to have it learn from each individual remote.

However, once I did this and downloaded the settings to the remote, the "ALL OFF" button (which is intended to power off all of your A/V components with a single button press) stopped working properly. I have an A/V system consisting all recent model Sony components and for some reason I can't quite fathom the "ALL OFF" button powers everything off, except for the receiver. The "ALL OFF" button on the existing remote which came with the receiver works fine.

After spending two days messing around with the configuration of the RM-AX4000 I was unable to resolve this issue. Also, you must run another initial wizard in order to configure the macros. This whole process requires you to teach it, using the existing remote control for each component. This takes time, and the resulting macros needed tweaking to get them to work properly. This whole process could have been better.

After spending two days learning how to configure the RM-AX4000 using the software I have a single remote which works well......

Overall, I rate this item 3 stars because of the poorly implemented PC software.

Update - a new version of software, AX Remote Editor 1.1, is available for downoad from the Sony Website. You are now no longer forced to run the initial setup wizard !

Update II - the AX Remote Editor 1.1 software seems to run OK on Windows Vista, but THERE IS NO VISTA USB DEVICE DRIVER FOR THE RM-AX4000.

45 of 47 people found the following review helpful:

2.0 out of 5 stars Purchased and RETURNED, November 6, 2005

By 

so-cal "so-cal" (Orange County California) - See all my reviews

This review is from: Sony RM-AX4000 Home Theater Remote Control (Electronics)

I recently purchased and RETURNED the RM-AX4000. Initially I was excited to have found a newer Sony remote (currently own the RM-AV3000) that could be programmed using my PC versus the traditional method of "head-to-head" learning. The RM-AX4000 looks and feels great; however, the PC program just doesn't cut it.

Additionally, with the exception of my television (Samsung) all other components are Sony and the PC software required that I place the original remote "head-to-head" and press the power button to correctly identify the Sony product. Also, the PC software could not identify the power button on the Samsung remote and required that I learn every button.

The included instructions indicated that you cannot use both methods to set-up the remote, I found this to be true and extremely frustrating, as you may encounter an issue while using the remote, and therefore you cannot correct or change a macro on the remote itself, you must return to the PC, attach using the included USB cable and then correct the problem. Also, if you want to test your changes, you must download the new information to the remote and then return to your living room to test. I experienced many round trips between the living room and PC, and ultimately decided that programming the RM-AX4000 should be done on the remote not the PC.

Finally, unless you have a clear line between the new remote and all of your components (which I don't) functions such as "all off" don't reach their target (I did notice that if I point the remote at the ceiling, it worked fine). With that being said, you may have a macro to turn the system off at a specific time, however, unless you leave the remote in a specific location, on a coffee table for example, it doesn't work that well. I don't know about you, but my remote can usually be found laying on the couch or chair, not on the coffee table.

I much prefer my older RM-AV3000. It performs all the same functions, requires the same amount of learning, has a larger infrared area on the front (which is probably why I don't have problems with the macro functions) and works fine.

19 of 19 people found the following review helpful:

4.0 out of 5 stars A nice replacement for all your remotes, July 7, 2006

By 

B. Johnson "BAJ" (Minneapolis, MN) - See all my reviews
(REAL NAME)   

This review is from: Sony RM-AX4000 Home Theater Remote Control (Electronics)

I purchased the Sony RM AX4000 to replace my existing Sony remote commander, the AV3000. What I really wanted was a way to backup the settings in the AV3000 that worked reliably (via a computer). The AX4000 accomplishes this, although in less-than-ideal manner. The beauty of this is that if someone pulls the batteries out, reloading the settings is a matter of minutes instead of a matter of hours.

Like the AV3000, the AX4000 has two huge selling points for universal remotes - macros and user-defined buttons including a 7-character custom description. The macros are awesome for complex systems where multiple devices need to be powered-on and correctly set to watch or listen to the desired content. For example, I have a macro button called "TV" which turnes on the receiver, the VCR, and the TV, turns the receiver to "VCR1" and sets the audio mode to stereo. The user-defined buttons will be well received by everyone, especially those who have used other "learning" remotes and have toiled over which button to use for special functions based on the descriptions available on the remote, and then trying to remember that later during use.

The AX4000 has two modes for programming - with the remote directly via manufacture codes and head-to-head learning, or through the PC based software. You can't do both, which is unfortunate.

Since I wanted the computer backup functionality, I chose the software method. The software is a bit clumsy and at times counter-intuitive, but functional once you get the hang of it. The wizard is lame and you should get through it as fast as you can (I recommend picking one dummy device to configure and delete it from the advanced tab when done). The software allows you to quickly select codes for your equipment from pull-down lists. Then, with the remote connected via USB, you can test the codes from your computer with the emulator mode. This is really only useful if your computer is in the same room as your AV system, or you have a laptop you can bring into the room. You can test the codes and if they don't work, try another (there are multiple codes for most manufacturers). Whatever functions do not work or are not available in the standard template can be learned by the software through the remote with head-to-head learning.

I have a somewhat complex arrangement with 10 components to control, and a few that are less common.

Yamaha 3-Zone AV Receiver
P-M TV
Magnavox VCR
Magnavox DVD
Sony 200 CD Jukebox
Omnifi DMS1 MP3 Streamer
Hauppauge MVP Video Streamer
X10 Light Controls

The preset codes worked for quite a few of the components, but the receiver zones 2 and 3 and the Omnifi and Hauppauge units weren't in the list (not surprising), so all of those keys had to be taught. The AX4000 had trouble learning some of these keys, and I had to repeat the learning and test them several times. Numerous times it would say "learning complete", but the function would not work. Varying the distance between remotes as well as the time the button was held seems to be important for some functions. I had little-to-no trouble learning these same functions with my AV3000, so the AX4000 seems to be a step backwards in this category.

I probably spent 3 hours installing the software, putzing with options, and loading the configuration for the above components. I then spent probably another hour or two over the course of a week or so "fixing" the buttons that did not work on the first learn attempt (I didn't test every button initially). I think the only button I haven't been able to make work yet is the eject button for the DVD player.

One of the disadvantages of this unit vs the AV3000 is the loss of the physical component buttons on the remote. These are now on the touchscreen. While this isn't a make-or-break item for me, I definitely preferred the physical buttons.

The screen on the AX4000 is larger than the AV3000, and the image is sharper with better contrast. If the remote is asleep, the backlight and screen comes on when the screen is touched once. The problem is that if the display is still on, it will perform whatever function is under your finger. There is a "light" button, but I haven't become accustomed to using this yet. Like the AV3000, the AX4000 is big. One-handed operation is difficult at best, unless you rest it on the arm of a chair or sofa (that's what I do).

The software has it's share of bugs. The setup wizard is poorly done and should not be used. The user defined buttons within the components cannot be rearranged. The components in the system list can be rearranged with an intuitive drag-and-drop. Seems like that should apply at the component level also. In the learning mode, the software skips some of the user-defined key positions (depending on the component), making these buttons useless. I've found that you can teach the function to an unused key and then 'alias' the user defined key to the defined key, but the original learned key cannot be deleted. For this I've made a "junk" device to keep these learned function without creating confusion during use. Klugey but effective.

I recommend this unit for those who are comfortable figuring out and using new computer software and don't mind spending time getting things setup. Don't expect this to be a 15 minute job or you will be disappointed. The only shot you would have at this is if you have all Sony components which have been on the market for a while.

In summary:

Pros:
PC Backup of Configuration, reloads in seconds
Big, crisp touch screen
Macros and User-defined keys

Cons:
Clumsy software
Some user-defined buttons can't be taught
Trouble learning some functions