Customer Reviews

215
4.1 out of 5 stars
Sony Semi-Hard Plastic Protective LCD Screen Cover
Price:$9.40 + Free shipping with Amazon Prime
Your rating(Clear)Rate this item


There was a problem filtering reviews right now. Please try again later.

45 of 45 people found the following review helpful
on May 7, 2014
This cover does not fit a6000 - it sticks out on the left unless you mount it upside down. Too bad I realized this only after I removed the protective plastic. Normally, I think it is up to me to buy the right product, but how can I tell if there is not a single camera mentioned in the product description? I guess it's my loss, but I hope other a6000 owners won't repeat my mistake!

Update on 5/08/14:

After I read in the instructions that you can remove the protector and reapply it if not set correctly I decided to mount it rotated by 180 degrees - that's what I meant by "upside down" in my original review. I guess my camera screen is protected for now while I try to figure out what to get next that will actually match the camera and won't offend my sense of aesthetics.

Some more thoughts on the mounting process:
1) the border around the viewing window does not leave much room for error, hence it is good to prepare well before applying the protector
2) I was not sure if I would get the whole display showing, so I took a picture of a white surface and put the camera in the playback mode to light up the whole screen
3) I wish I had the screen laying flat on a hard surface for easier mounting. You will have to prepare for this - I think setting up two stacks of books, so that the camera could rest firmly on them on with the lens facing down between the stacks should work fine (leave some extra room if you lens extends on power up.)
44 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
29 of 29 people found the following review helpful
FYI...This is not a fit for the Sony a7 or a7R body. It comes up as an optional accessory when viewing the camera body on the Amazon page. One will need the screen protector model Sony PCKLM16 Digital Camera Screen for the Sony a7 and a7R.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
29 of 30 people found the following review helpful
on December 4, 2012
I bought this product directly from Sony, but it's actually cheaper at Amazon. It fits my NEX-6 perfectly. No bubbling and it seems like it will do a great job protecting the screen. This product (or something equivalent) is a necessary accessory for the NEX 6.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
19 of 20 people found the following review helpful
on January 4, 2013
I bought this for my Sony NEX-7 after viewing a YouTube video which referenced this product. I have to say it appears to be a very sturdy piece of material. It installed very easily and when installed on the large view screen, it is hard to identify as an added piece. For the price of cameras today, I would highly recommend purchasing this as an insurance policy for your investment.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
17 of 18 people found the following review helpful
on May 11, 2014
The Amazon product description is very weak; but the Sony product number is provided. I checked the Sony website for the a6000 and saw this product pictured on the a6000 page as a "featured product." Thus, I assumed it fit properly.

The actual product packaging I received states that it fits the NEX-6, NEX-7, and ILCE-3000.

The cover itself is a perfect size match for the glass LCD screen on the a6000. But the viewable portion of the a6000 LCD is smaller than the glass; with a wider black margin on the right side than the left side. If you look at the screen cover picture you see a wider margin on the left side. It will fit perfectly if you turn it upside down. Thus, functionally it is fine; but aesthetically the "Sony" name will now be upside down on the top of the screen.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
16 of 17 people found the following review helpful
on August 26, 2012
I don't use screen protectors on anything I own. iPhone, iPad, other cameras. I bought this for my Sony NEX-7 because I figured the camera would be bouncing around a bit and didn't want to scratch my new expensive toy in a spot where I would see it all the time.

Installed the screen protector looks like it's part of the camera. It was very easy to install with no bubbles or dust left. So far I haven't noticed any downsides such as extra glare which would be expected.

Great protection for the low price I paid.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
16 of 18 people found the following review helpful
on June 15, 2013
I ordered the PCK-LM1EA elsewhere because I was order something else that I needed to buy there, but I did buy it and you can consider this a review from someone who actually bought this and installed on the NEX-7.

In my opinion, this Sony LCD protector is superior to the 3rd-party protectors made from glass. The glass protectors really only have one advantage, that being greater scratch resistance, but several disadvantages. In terms of optical quality there is no difference. From the standpoint of protection, polycarbonate is superior for the same reason that safety eyeglasses are made from polycarbonate: it doesn't shatter and does not easily break. Screen protection should not merely protect the LCD screen from scratching, it should also reduce the chances of breakage. Those glass protectors are fragile, and contrary to what some people have erroneously inferred from the fact that the glass protector broke and the LCD panel did not, the glass protectors do nothing to reduce the chances of breakage. They do not absorb any appreciable amount of energy, nor do they transfer force to the outer edges of the LCD panel. The polycarbonate absorbs a useful amount of energy and transfers at least some of the force to the outer edges of the LCD panel. Thus, from the standpoint of protection from breakage, the polycarbonate protector is much superior to the glass protectors, which is almost certainly the reason that Sony chose polycarbonate.

There are other advantages as well. With the other, popular glass protector that was recommended, the outer frame was so wide that unless you positioned it with absolute perfection, you ended up with some of the screen blocked. And even if you get it perfect, it will still block some of the screen if you are looking at it from off to one side. This is a very significant disadvantage to my way of thinking. The same problem does not occur with the Sony protector. In fact if you do not do a particularly good job as you install it, it may be noticeably crooked but still is not as likely to block the screen. Additionally, the slight amount of flex makes it easier to install. I had fingers and thumbs at the four corners and was trying to lower it steadily that last mm, but could not maneuver it further down without inducing some sideways motion. Thanks to the flex, my spare finger found its way to the midpoint of one of the edges and gently pushed it down until it make contact, which provided the stability needed so that I work my other fingers and thumbs out of the way and allow it to drop the rest of the way.

If this protector accumulates scratches over time, I will most likely replace it with another of the same. If my sense at some point is that I will be doing this more than one, i.e., a yearly affair, then I will go ahead any buy several of them for the eventuality that at some point they will not longer be available.
22 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
5 of 5 people found the following review helpful
on February 11, 2013
I bought this for my Sony NEX-5N camera and it fits well and very easy to install. It doesn't bubble up as much as those covers for the cell phones and the few bubbles that were under the cover, were easy to push out. As the description states, it is a semi-hard plastic cover that gives the camera screen a good layer of protection but still responds well to your touch. I believe this fits other Sony NEX models but I would do your research before buying for other NEX models.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on September 11, 2013
I recently purchased the Sony NEX-6L/B 16.1 MP Compact Interchangeable Lens Digital Camera with 16-50mm Power Zoom Lens and 3-Inch LED (Black) for a vacation to Cancun, Mexico. Even though I've brought semi-professional dSLR's to beachy/sandy environments before, I was still nervous about accidentally scratching my new screen.

There are a wide variety of screen protectors to choose from at all different price ranges with varying levels of quality. I ended up going with this Sony-branded one because the price point is surprisingly perfect, and that I am always careful with the handling of my dSLR's (e.g. I don't need space rocket material to protect my screens).

- The screen protector is applied via an adhesive of sorts. The adhesive does not any leave residue on the physical screen.
- Screen quality is identical before/after applying the protector.
- You have to be *very* careful when applying the screen. When I first applied it, I had a very tiny eyelash that was stuck in the center. This forced me to peel off and re-apply the protector, which left a tiny air bubble.
- The screen protector is good at resisting fingerprints and smudges. I have to try really hard and/or get really sweaty to leave fingerprints.
- I never once had the screen become foggy due to extreme changes in temperature (e.g. going from a cool indoor hotel room to a hot outdoor environment).

Final Thoughts: For the price, quality, and fact that this is an OEM product, Sony's semi-plastic screen protector easily deserves a 5 out of 5 rating.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on May 6, 2014
Let me say I seen this while shopping for some filters for my new NEX-6 camera. I read a few of the reviews and thought I would try it. I have an iPhone 5 and have had iPhones for years now. I never liked screen protectors as they always looked like a screen protector was stuck on your phone. Besides that, it is an iPhone and almost impossible to scratch the glass (I did say almost). Now I have applied screen protectors before and was never satisfied with the end result until now. I cleaned the LCD display with a clean cotton Tshirt. As I had a hard time seeing the display for lint, I put on my LED headband light. Wow did that sure light it up and make it ten times better. Well as fate would have it, I did not get it squared the way I wanted it the first try. I grabbed my Xacto knife and lifted at the corner. The protector came up and this time I did get it right. After double checking, I pushed it down gently and pulled the protective film off. What I saw was pure magic. The most beautiful screen protector I have ever seen. The designer should be awarded as this looks gorgeous on the camera. Now I feel comfortable knowing I won't scratch my screen and it looks like the factory did it. I am so impressed and positive you will be too!
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See all 48 answered questions


Send us feedback

How can we make Amazon Customer Reviews better for you?
Let us know here.

Your Recently Viewed Items and Featured Recommendations 
 

After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.