- Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets
- Stainless steel 304 is corrosion resistant up to 1,500 degrees F (though less resistant to corrosion than stainless steel 316), weldable, and stronger than steel and aluminum
- Countersunk holes for convenience when mounting
- Polished finish for additional corrosion resistance and a reflective decorative quality
0 items added
To add items, choose from the table below
Stainless Steel 304 Continuous Hinge With Holes, Polished Finish
|Price:||$12.07 - $88.60|
|Brand Name||Small Parts|
|Cross Section Shape||Flat|
|Mounting Type||Surface Mount|
|Style Name||With Holes|
The stainless steel 304 continuous hinge has countersunk holes and is sui... See more product details
Customers Who Viewed This Item Also Viewed
The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 resists corrosion up to 1,500 degrees F and is suitable for equipment used in corrosive environments, though not as resistant to corrosion as stainless steel 316. A weldable material, stainless steel 304 is stronger than steel and aluminum. The polished finish provides additional corrosion resistance and a reflective decorative quality. The range of motion for this hinge is 270 degrees from the folded position.
Continuous hinges, also called piano hinges, provide support to run the full length of the doors, panels, or pieces being joined together. They are manufactured in a variety of materials and sizes, with or without holes, finished or unfinished, and can be cut to specific sizes. They also vary by knuckle length, pin diameter, leaf thickness, and open width. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. The pin runs the length of the hinge holding the leaves together. The leaf is the flat metal portion of the hinge that extends laterally from the knuckle and revolves around the pin. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.
Top Customer Reviews
The problem, as noted in other comments, is the shipping packaging. The first shipment was returned as damaged by the shipper even before being delivered to me. The second shipment, now delayed, was delivered but the hinge turned out to be bent in several places. If not for the immediate need for the hinge, I would have returned it as damaged.
The packaging is idiotic in that it does not provide support to prevent bending of the hinge, especially along the plan of the hinge that has limited intrinsic strength. The 7 ft. by 2 in. hinge came in a flat, corrugated cardboard package that was 8 ft. by 24 in. The flimsy, unwieldy, over-sizing of the packaging actually increases the potential for bending the package and thus the hinge. A tube that provides physical support in all planes for the hinge should be used. Others have complained about the packaging. That Amazon ever believed this package could have arrived undamaged shows poor forethought.
I was going to order another, slightly heavier, stainless steel hinge but unless they change their packaging I will not. Who wants a wavy, binding hinge to work with?
I'll post a picture of the doors as well as the packaging they were shipped in.
One thing of note, I purchased the 3/4-inch stainless steel screws that everyone seemed to "purchase together" - they hold the hinge fine but I found on some parts or length of the hinge that the screw heads were out too far so the screw heads would touch before the door was flush. This was only the case on certain spots so it might have been related to installation errors haha. Also, the hinge holds great even with every other screw hole used (odds on the door, evens on the jamb).
I'll post a follow up later on to comment on rust resistance - so far so good but it's only been about a month.
The packaging was a bit much...huge box for such a small item.
Most Recent Customer Reviews
Good price on stainless hinge, its been installed for a while now and still shines bright.Published 2 months ago by CHEVEN
I was extremely pleased with this product. Very good quality and it arrived as promised. Would definitely buy these again!Published 3 months ago by Amazon Customer
Did the job for me very well. Easy to install, kept its correct alignment on install and during use, and has been strong enough.Published 6 months ago by James Gnitecki
Excellent product. No defects, great finish and cuts well with wheel or blade.Published 8 months ago by Jomo