Frequently Bought Together
What Other Items Do Customers Buy After Viewing This Item?
Product Specifications
Part Number 1100K10
Item Package Quantity1
Item Dimensions
Weight11.52 Ounces
Length4 inches
Width6 inches
Height2 inches
Product Features
|
Product Description
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.
Product Details
Would you like to update product info or give feedback on images?
|
Related Items
- Most Popular
- Abrasive & Finishing Products
- Hardware Adhesives & Sealers
- Clamps
Customer Reviews
Most Helpful Customer Reviews
4 of 4 people found the following review helpful
******
I once built a wooden homebuilt aircraft with T-88 and found it to be the best epoxy I had ever used. Since then I've used it on furniture and other home repair jobs. Mix ratio is 1:1 which makes it easy to do. I flew the homebuilt aircraft for two years and had a couple of hard landings. The joints all held up and the plane went through several other owners before it was totaled out by an inexperienced sky jockey. Try it. I'm sure you'll be pleased.
I once built a wooden homebuilt aircraft with T-88 and found it to be the best epoxy I had ever used. Since then I've used it on furniture and other home repair jobs. Mix ratio is 1:1 which makes it easy to do. I flew the homebuilt aircraft for two years and had a couple of hard landings. The joints all held up and the plane went through several other owners before it was totaled out by an inexperienced sky jockey. Try it. I'm sure you'll be pleased.
3 of 3 people found the following review helpful
Amazon Verified Purchase
I used this to bond some MDF to fiberboard siding on the exterior of my house. Hand mixing can be hard as the epoxy is thick and will be hard to stir. I stirred and applied it with a acid brush which makes an ok applicator. After mixing, it is very thick, but will droop/run on a vertical surface. You get 30-45 minutes of working time. 24-36 hours to cure. Coverage is 80 square feet per gallon or 90 sq inches per ounce. This item is 1/2 pint (8 oz), so you get 720 square inches of coverage (5 sq ft). The cured product is tough and hard and amber-clear color. These mixing cups Mixing Cups, Graduated, 12 ounce, 10 pieces were very helpful. You'll want gloves too, I like these SafeTouch Nitrile Exam Gloves, Non Latex, Powder Free, X-Large, Box The manufacturer's (System Three) website has alot of good info about epoxy.
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
Listmania!
So You'd Like to...
Look for Similar Items by Category
|
