Customer Reviews

BOSCH T101BIF 3-Inch 14 TPI Bi-Metal T-Shank Laminate Flooring Jig Saw Blade - 5 Pack

5 star:		(4)
4 star:		(0)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

I cut laminate with it very easily with no chipping. The teeth stick straight out instead of at an angle like with typical blades for wood or metal.

I have also cut wood, mdf, and drywall with these blades with great results.

These blades are the ticket for laminate flooring. You are able to work with the laminate right side up, which significantly reduces the chance of making errors while cutting complicated shapes. (After a long day of cutting laminate upside down you always cut a few mirror images of what you want).

The cuts are extremely smooth. If you get the board to sit flush against an object (counter, cabinet, ect.) often you will not require silicone or quater round to hide the edge.

The blades last much longer than any given wood or metal blade when cutting laminate. The correct size teeth and cutting edges in both direction are responsible for the blades holding up so well when cutting laminate.

I absolutely refuse to use anything else to cut laminate; even if it means paying customs and waiting for a week, instead of walking down the block to the hardware store.

The blades are great for laminate.If you are not careful while cutting then you may end up bending the blade and buy new one.I used this blade to cut my 15 mm laminate.There was no issue.

I USED THE BOSCH BLADES ON MY LAMINATE FLOORING AND THEY CUT THE LAMINATE LIKE BUTTER.