The TOGGLER ALLIGATOR A10 flush-mount anchor provides a secure hold in solid concrete, brick, and stone, includes #14 x 2-1/4" sheet metal screws for fastening, and is made in USA. Once inserted flush with the surface of a 3/8" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted. The polypropylene body resists corrosion and expands to fill and mold to a hole when a screw is inserted. This helps distribute the force evenly throughout the anchor's length to help prevent fracture of the mounting material. If using screws other than those supplied, the anchor accepts a #10 to #18 size screw with a thread length at least equal to the thickness of the item being fastened plus 2".
Ultimate Tensile Strength Values
|Anchor||Drill Diameter||Screw Description||1/2" Drywall||3,500 psi Concrete|
|A5/AF5||3/16"||#8 sheet metal screw||57 lb.||544 lb.|
|A6/AF6||1/4"||#10 sheet metal screw||69 lb.||675 lb.|
|A8/AF8||5/16"||#12 sheet metal screw||85 lb.||1,025 lb.|
|A10||3/8"||#14 sheet metal screw||N/A||1,168 lb.|
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
What’s in the Box?
- (4) TOGGLER ALLIGATOR A10 anchors
- (4) #14 x 2-1/4" sheet metal screws