This TPI Corporation ACH30-O industrial single phase 30-inch diameter oscillating circulator fan head is for use with any TPI industrial mount. It has three aluminum paddle blades and oscillates in a 90-degree arc or can remain stationary depending on the air circulation needs of the operating environment. The blade assembly (consisting of a steel hub and spider) holds the fan head’s three aluminum paddles, which are enclosed by front and rear chrome-plated, steel wire guards for strength and resistance to corrosion. Metal gears in the oscillation assembly enable the fan to operate in a downward tilt of up to 30 degrees. Because the motor is totally enclosed, this TPI industrial single phase oscillating circulator fan head is suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of dust or other airborne debris.
|Motor ||2-speed, 2.5 amp, 120 volt, single phase, 1/4 horsepower, ball bearing, totally enclosed, permanently lubricated, permanent split capacitor |
|Switch type ||Pull chain |
|Cord ||12 foot stranded junior thermoplastic (SJT) type three-conductor |
|Blades (3) ||Aluminum |
|Guards ||Chrome-plated, steel wire |
|Cubic feet per minute (CFM) ||7900/6000/4750 |
|Temperature range ||-4 to 140 degrees F (-20 to 60 degrees C) |
|Weight ||48 lbs. |
TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.