Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

Image Unavailable

Image not available for
Color:
  • Tapco 10558 PRO 19 10-Foot-6-Inch Wide by 19-Inch Throat Portable Brake
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      

Tapco 10558 PRO 19 10-Foot-6-Inch Wide by 19-Inch Throat Portable Brake

by Tapco

Currently unavailable.
We don't know when or if this item will be back in stock.
  • 10-1/2-foot portable siding brake
  • 19-inch throat depth allows for larger, more complex shapes; moving pivot hinge increases lifting power
  • Lightweight, anodized alloys and computer designed die castings for strength, durability
  • Stand not included; some assembly required
  • 10-1/2 feet; 139 pounds; 1-year warranty
See more product details
This item’s packaging will be visible when delivered and cannot be gift-wrapped.

Find Holiday Deals and Savings in Tools & Home Improvement Find Holiday Deals and Savings in Tools & Home Improvement


What Other Items Do Customers Buy After Viewing This Item?


Product Information

Technical Details
Part Number 10558
Item Weight134 pounds
Product Dimensions140 x 24 x 12 inches
California residentsClick here for Proposition 65 warning
Item model number10558
  
Technical Specification
Additional Information
ASINB00002252C
Best Sellers Rank #962,954 in Home Improvement (See top 100)
Shipping Weight134 pounds
ShippingThis item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
Date First AvailableJuly 1, 2004
  
Feedback
 

Product Description

Product Description

Tapco's exclusive Unilink technology! Never adjust your brake again. 19" (48.3 cm) throat depth-largest in the industry for more efficient bending. Stores material inside bender-reduces handling and flipping of material and speeds up bending. Lightweight, high-tech anodized alloys and computer designed die castings. Patented "Moving Pivot Hinge" increases bending power without marring material. Patented inside working pockets and 2 3/8" (6.0 cm) mouth opening. 180 ° hemming capability for making more rigid panels.

From the Manufacturer

The same great features as the Pro III, but you gain an extra wide 19-inches throat depth. 35 percent more throat depth than any other portable bender in the industry. The deeper throat opening allows for larger, more complex shapes making it faster and easier. Use of material storage inside the bender reduces handling, flipping and speeds up bending. The patented Moving Pivot Hinge increases lifting power and eliminates marring of material. The Pro 19 features make it the best in the industry with its strong computer redesigned die casting, positive clamping system, wide mouth opening, and its time saving accessories. Shown with optional accessories Pro-Stand, Sidewinder, Wizard, and Pro Cut-Off. Size: 10 feet by 6 inches.

Customer Reviews

4.3 out of 5 stars
5 star
4
4 star
4
3 star
1
2 star
0
1 star
0
See all 9 customer reviews
Easy to keep in adjustment and two people can move it with ease.
DPR
Plus the "snap-stand" doesn't come with it, I knew that but pictures are deceiving.
Charles Cook
The 19" depth is nice and it does a good job bending aluminum stock.
"DOC" C.

Most Helpful Customer Reviews

16 of 16 people found the following review helpful By DPR on February 22, 2002
This is a great affordable tool for those who need a portable bender. It's not just a siding bender. I've used it to make copper drain pans as well. You can't go over 16 guage, but the results are consistant and two people can bend a full 3X10 sheet of copper into just about any configuation. The 19" throat is not high enough to work like a pan brake, but you can compensate by figureing out the bends from the center out. Easy to keep in adjustment and two people can move it with ease. The Pro Cutoff is a keen accessory that will give your cuts nice edge.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
8 of 8 people found the following review helpful By A Customer on April 10, 2001
I would reccomend the pro 2000 to anyone. It has proven to me to be the best bender I have seen as a siding contractor. I woul;d also to reccomend in the sidewinder and the pro cut off as a must as these are great timesaving pieces of equipment.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
2 of 2 people found the following review helpful By Randy Buckner on May 24, 2006
Verified Purchase
Bender works great for light duty bending. I would suggest the next model up for bending 28ga. painted flashing. Machine came damaged from shipping, but tapco sent parts to repair. Good customer service, a little slow but they are very good to resolve the problem. Also suggest the pro cut off, sidewinder and snapstand. Thanks Tapco.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
3 of 4 people found the following review helpful By Joseph A. Robichaud on October 9, 2005
The only flaws I have found is the rubber strip that prevent scratches on the leading edge of the brake is not pinched in place so it slids out of the track, the tape on the brake fades to the point it can not be read, the hindge points are made of steel and rust in time, the locking pins for the handles need to be replaced with latch pins. The balls rust and make it almost impossable to remove them.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
This unit is well constructed but could be improved by providing a better user's manual. If you are not familiar with using a brake the poorly written manual is little help. I actually thought my unit wasn't working properly until I called the support staff. I found out that one simple detail left out of the manaul made a big difference. Also the manual provides no information regarding the dimensional limits to bending. The 19" depth is nice and it does a good job bending aluminum stock. However, there is room to improve it and make it a better tool. It is still worth having if you do any aluminum trim.
1 Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again