Two differently formatted channels deliver everything from warm classic tube tones to Sumo-sized distortion. This 2U, 300-watt rackmountable head features a fan-cooled chassis and is equally at home in a rack system or as a compact stand-alone head. Its heavy gauge steel case is touring tough. With pro features like a +10dB gain switch to enhance low output pickups and drive active pickups harder, and a SansAmp XLR Direct Output, this amp will quake the bedrock live and in the studio. LM-300 ADDITIONAL FEATURES SansAmp XLR Output works like a built-in direct box to deliver the true tone of the amp to the PA desk or studio board without compromising detail, warmth or responsiveness. The XLR is switchable from -20dB to 0dB. Gain is a 10dB gain boost to set up the pre-amp for different pickups. For example, with lower output, passive pickups, you can have punchier sounds with Gain engaged. Conversely, with higher output, active pickups, you can have a cleaner sound with Gain disengaged. Effects Loop. Tuner Output - Independent buffered output provides a constant unaffected signal. 1/4? speaker outputs. Rackmount Kit SPECIFICATIONS Input Impedance: 1MOhm Nominal Input Level: -20dBu Optimal Output Load: 4 Ohms Power Output: 300W Effect Loop Input Impedance 1MOhm Maximum Effect Loop Input* approx. -6dBu Nominal Effect Loop Output Impedance 1KOhm Nominal Effect Loop Output* approx. -10dBu No...
