Audio Technica AT-LP60USB Fully Automatic Belt Driven Turntable with USB Port

by Audio-Technica

Product Details

• Product Dimensions: 15.6 x 17.3 x 5.3 inches ; 8.3 pounds
• Shipping Weight: 10 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B002GYTPB8
• Item model number: AT-PL60USB
• Average Customer Review: 4.0 out of 5 stars  See all reviews (66 customer reviews)
• Amazon Best Sellers Rank: #1,635 in Electronics (See Top 100 in Electronics)
  • #12 in Electronics > Home Audio & Theater > Stereo Components > Turntables

Product Description

Amazon.com Product Description

Digitize your favorite 33-1/3 and 45 RPM records on the Audio Technica AT-PL60USB turntable, which comes equipped with a USB output that allows direct connection to your computer. The system offers Mac- and PC-compatible Audacity software, an integral dual-magnet Audio-Technica Dual Magnet phono cartridge with replaceable stylus, and a USB cable and adapter cables.

With Audacity recording software, you can convert tapes and records into digital recordings or CDs, change the speed or pitch of a recording, and more. The turntable also features a built-in switchable phono/line preamp that allows connection to a stereo system equipped with either a phono or line-level input.

Specifications Motor: DC servo-controlled Speeds: 33-1/3 RPM, 45 RPM Turntable Platter: Aluminum Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS) Signal-to-Noise Ratio: greater than 50 dB (DIN-B) USB Function: A/D, D/A: 16 bit 44.1 kHz or 48 kHz USB selectable Computer interface: USB 1.1 Compliant Windows XP, Vista or MAC OSX Output Level: Pre-amp "PHONO": 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 150 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized Power Supply Requirements: 120V AC, 60 Hz, 3W Dimensions: 14.17 x 3.84 x 14.02 inches (WxHxD) Weight: 6.6 pounds Accessories included: Dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8") mini-plug (female) stereo adapter cable; 45 RPM adapter; USB cable; recording software System Requirements Mac running OS X 10.1 or later PC running Windows (98 and above) Available USB port (USB1.1 or higher)

See larger image.

Product Description

Get your classic albums off the shelf and into your MP3 player. The Audio-Technica AT-LP60 USB makes it easier than ever to transfer your albums to the digital realm with this new recording system. The AT-LP60 USB stereo turntable comes equipped with a USB output that allows direct connection to your computer. The system also offers: state-of-the-art recording software - Audacity (for both MAC and PC), an integral dual-magnet Audio-Technica phono cartridge, a USB cable and adapter cables. The turntable also features a built-in switchable phono/line preamp that allows connection to a stereo system equipped with either a phono or line-level input.

Customer Reviews

Most Helpful Customer Reviews

140 of 143 people found the following review helpful:

4.0 out of 5 stars Good provisional or first machine, but perhaps best to go up one model, June 11, 2010

By 

Samuel Chell (Kenosha,, WI United States) - See all my reviews
(TOP 100 REVIEWER)    (HALL OF FAME REVIEWER)    (REAL NAME)   

Amazon Verified Purchase

This review is from: Audio Technica AT-LP60USB Fully Automatic Belt Driven Turntable with USB Port (Electronics)

This has recently gone up in price, even apart from the Gold Box Special that greeted me. In a way, I wish I'd seen the higher price, which would have discouraged me from ordering so quickly. I remember when, in the '70s, it cost more to replace a Shure V-15 Type II cartridge than to purchase this turntable, which comes complete with cartridge, stylus, and 4 different connecting cables to cover just about all situations, even those for customers without a receiver/amplifier. It wasn't long before, in the '80s, the elliptical stylus itself went for over a hundred, eventually taken off the market by Shure due to the scarcity of its rare and costly constituent.

The point: for 60 to 90 bucks, you should not expect anything close to a genuine audiophile turntable--even though the machine includes auto tone arm lift, two instruction manuals, four well-made cables, cartridge and stylus. But the feature missing with this turntable, the one reason I wish I hadn't ordered it and had waited to purchase the next model up, is a counterweight for achieving precise tone arm balance as well as an anti-skating control for reducing pressure (and distortion) on the inside grooves of the vinyl LP, especially the tracks closest to the middle hole.

Nevertheless, given the absence of a counter-weighted tone arm and anti-skating control, this turntable does a highly competent job of tracking most recordings. In fact, it performs better than both of the ailing industry-standard, professional Stanton turntables that were proving increasingly problematic at the station. Also, the tracking pressure that I measured is less than 2 and a half grams, light enough to prevent the stylus from eating up your vinyl (at least not until after 2-3 playings).

The unit comes with built-in preamp, so not only does it not require an amp with a phono jack, but it doesn't require any amp beyond the one in your computer if your primary consideration is converting vinyl to digital. A couple of things to be aware of: the lift on the tone arm is too small to be of use for manual placement. You'll need to be comfortable with the automatic lift mechanism or forget about picking up and dropping down the tone arm with any semblance of accuracy. Also, in back is an all-important lever that switches the unit from "phono" to "line" connection. If you're using the unit without an amp with phono jack (beginning in the '90s, cost-conscious manufacturers began leaving them off of receivers and amps, though with the comeback of vinyl we've seen the reappearance of phono jacks), be sure to set the switch to "line." The same holds true if your connection involves use of any of the optional cables and connectors that are included with the turntable.

The turntable tracks quite nicely from what I've seen, and is worth the low cost. Still, before investing in a USB unit--without or without phono connectors--you may simply wish to save up for the best "conventional" turntable along with an amplifier or receiver that has a phono jack. That way you'll have a better chance of scoring some of the audiophile niceties mentioned above, and connection to your computer will be no problem--whether you have an 1/8" familiar audio jack or an adapter that will transform RCA into USB cables.

The software included with the turntable is Audacity--a respected freeware program that's capable of doing an excellent job but is not known for being the most user-friendly program. Other possibilities are Cool Edit (for PC users); Spin Doctor or Sound Studio (Mac users). Once you've converted a couple of LPs, it's a piece of cake--except for the potential of allowing the process to consume all of your time and life. (Try to resist the temptation to make up your own CDs, complete with jewel cases, printed front and back covers and spines, disc centers, booklets, photos, inserts, etc. Another not inconsiderable expense--in time as well as money.)

106 of 110 people found the following review helpful:

5.0 out of 5 stars A nice toy.... and i mean it!, February 24, 2010

By 

John Swenson "jswenson2339" (massachusetts usa) - See all my reviews
(REAL NAME)   

This review is from: Audio Technica AT-LP60USB Fully Automatic Belt Driven Turntable with USB Port (Electronics)

Have been waiting and watching and after my first use, download to the computer, and mp3 file creation, I'm happy enough to recommend this product.

For under a hundred bucks the quality seems great. The manual for setup of the system and software is well done with step by step pictures.

I have mine connected to both the computer and external speakers. I'm able to listen to the music while recording thru the external speakers and listen to playback of the downloaded music thru head phones on the computer.

the software has lots of options to play with. but the basic " push the red button to record " and file save as and file export, get the job done to make your albums digital.

109 of 118 people found the following review helpful:

3.0 out of 5 stars Underwhelming, April 28, 2010

By 

cubelodyte "The world is my oyster and I'm al... (Atlanta, GA) - See all my reviews

Amazon Verified Purchase

This review is from: Audio Technica AT-LP60USB Fully Automatic Belt Driven Turntable with USB Port (Electronics)

Purely as a turntable, this is a satisfactory unit comparable to any other at the $50 to $80 range. The features that should have set it apart (and for which I purchased the item) are all woefully disappointing.

1) USB-Direct Recording: The true purpose of my purchase was to update my current phonograph configuration to a more convenient way to convert my LPs to MP3. When using the USB connection, there is a dull but constant power-cycle hum from the moment USB Codec is selected as the Recording Device. After attempting to avail myself of this feature with multiple computers in my home I have concluded that the USB connection should be considered unusable by even the least discriminating among music lovers (Perhaps power filters could be used to isolate potential ground-loops but even then, you would still have to contend with issue number 3 below).

2) The software: Always in search of audio recording software that would work well on a PC, I was eager to test the claims of Audacity as proclaimed in the included accessory description for this turntable. As it turns out, Audacity is open source freeware. Anyone can get a more recent version of the software for free online.

3) Pre-amp: The ability to play this unit directly through a sound system with the boosted "Phono" inputs of older receivers was a major draw. Having held on to an older receiver for the single purpose of bridging between my turntable and my newer AV receiver, I was looking forward to eliminating one large and superfluous component in my rack. Given the tragic failure of the USB connection, I had also expected this to be the viable alternative to converting to MP3 on my laptop. Sadly, this too was a failure. The pre-amp in this unit is unable to cope with the low input at the end of any track that fades out. The result is a very abrupt cut-off followed by a series of unpleasant audio events as the pre-amp cuts in and out. These events seem to indicate that the db level at the end of the song combined with the surface noise usually experienced between tracks rests squarely at the bottom of the volume range necessary for the pre-amp to engage. As it turns out, this is also the case with USB recording but one might not notice as the aggravating hum covers most of the audio at this volume level.

At this point, my only remaining choice is to use the non-amplified output and run it through the mic input of my Creative Labs SB1090 USB Sound Blaster X-Fi Surround 5.1 Audio System external sound card (a delightful purchase from Amazon which will be reviewed separately). Of course, I could have done this with my existing turntable as could anyone else who purchased a comparable unit at a comparable price.