- Giant red button makes a hilarious statement or two!
- Perfect for calling out Bullsh*t without having to say a word yourself.
Product Features |
Product Details
Would you like to give feedback on images?
|
Frequently Bought Together
Product Description
This straight-talking Bullshit Button allows you to call bullshit whenever you see it! Simply press the red buzzer to make it light up, buzz loudly and announce, That was bullshit! or shout, Bullshit detected, take precautions! over a wailing siren. No friend, relative, teacher, or colleague will dare to bullshit you again after setting off the bullshit alarm. Availability: This Bull Shit Button takes approximately one business day to leave the warehouse plus transit time.
Customer Reviews
Most Helpful Customer Reviews
114 of 121 people found the following review helpful
Amazon Verified Purchase
Durability:
Educational:
Fun:
This toy was very educational- it got me thinking, and inspired creativity.
This button is AMAZING! My boss has an easy button, so of course I had to get one too... because I'm just that kind of employee...lol... riiiiight. I wondered if I could swap the guts of an easy button with a BS button... so I ordered both on Amazon, and had some fun doing a little creative soldering, trimming of internal plastic (under "easy"), and use of a rubber band to hold the pressure button from the easy button in place on the BS button after soldering the wires (see below for walk-through).
A switcheroo when he was out of his office, and presto: an innocuous looking button that lets out a random phrase letting you know what it REALLY was (hint: not easy)! That was easy.
DISCLAIMER: I work in an agency with a "high ops-tempo" and difficult cases where "everything is a crisis," and most importantly, a boss who gets my sense of humor. Try this at your own risk.
------
Remove feet from easy button, set aside (don't lose), sticky side up.
Separate halves of buttons, and carefully remove wires from easy button board (leaving them on the battery pack and speaker for ease), and BS button board.
Wire Connections:
Easy Button
black-VSS
white- VDD
Red- Speakers
BS Button
Black- GND
Red- VCC
White- Speakers
I recommend soldering to the back of the BS board (just find the appropriate spot and solder- it beats trying to jam wires into the board- good luck with that)
Your red wires become speaker wires, so solder those to their proper spot on the BS button.
Blk stays blk, so just solder that wire to the GND spot.
The white wire goes to where the red used to go, so solder that to the VCC spot.
You left the yellow and blue wires dangling from the LED on the BS button shell, so don't worry about those. They don't get used.
Loosely screw your Frankenstein's Monster's Trojan Button's guts down in one spot using an existing screw hole- button side down. Leave room to slide the metal plate back in place (it's makes a pop/click noise when you press the button, and is necessary for a convincing transformation).
Now would be a good time to affix the pressure switch (the rubber button from the top of the easy button). It will work on the BS button board to complete the circuit. I used a rubber band to hold the pressure switch in place (loop it around the middle of the board from one side of the switch, and back over the switch to hold it down).
On the back of the easy button's red shell there are four posts. You'll have to clip them almost all the way down. If you've tried to screw it down before now (impatient, aren't we), you'll have noticed that it doesn't fit. Keep clipping until it fits snugly over the top and you can slide the metal plate back under the guts so when it's all assembled the pressure pushes the guts down onto the pressure switch and clicks the plate at the same time). Screw it back together, and replace the feet.
Let the fun begin!
This button is AMAZING! My boss has an easy button, so of course I had to get one too... because I'm just that kind of employee...lol... riiiiight. I wondered if I could swap the guts of an easy button with a BS button... so I ordered both on Amazon, and had some fun doing a little creative soldering, trimming of internal plastic (under "easy"), and use of a rubber band to hold the pressure button from the easy button in place on the BS button after soldering the wires (see below for walk-through).
A switcheroo when he was out of his office, and presto: an innocuous looking button that lets out a random phrase letting you know what it REALLY was (hint: not easy)! That was easy.
DISCLAIMER: I work in an agency with a "high ops-tempo" and difficult cases where "everything is a crisis," and most importantly, a boss who gets my sense of humor. Try this at your own risk.
------
Remove feet from easy button, set aside (don't lose), sticky side up.
Separate halves of buttons, and carefully remove wires from easy button board (leaving them on the battery pack and speaker for ease), and BS button board.
Wire Connections:
Easy Button
black-VSS
white- VDD
Red- Speakers
BS Button
Black- GND
Red- VCC
White- Speakers
I recommend soldering to the back of the BS board (just find the appropriate spot and solder- it beats trying to jam wires into the board- good luck with that)
Your red wires become speaker wires, so solder those to their proper spot on the BS button.
Blk stays blk, so just solder that wire to the GND spot.
The white wire goes to where the red used to go, so solder that to the VCC spot.
You left the yellow and blue wires dangling from the LED on the BS button shell, so don't worry about those. They don't get used.
Loosely screw your Frankenstein's Monster's Trojan Button's guts down in one spot using an existing screw hole- button side down. Leave room to slide the metal plate back in place (it's makes a pop/click noise when you press the button, and is necessary for a convincing transformation).
Now would be a good time to affix the pressure switch (the rubber button from the top of the easy button). It will work on the BS button board to complete the circuit. I used a rubber band to hold the pressure switch in place (loop it around the middle of the board from one side of the switch, and back over the switch to hold it down).
On the back of the easy button's red shell there are four posts. You'll have to clip them almost all the way down. If you've tried to screw it down before now (impatient, aren't we), you'll have noticed that it doesn't fit. Keep clipping until it fits snugly over the top and you can slide the metal plate back under the guts so when it's all assembled the pressure pushes the guts down onto the pressure switch and clicks the plate at the same time). Screw it back together, and replace the feet.
Let the fun begin!
30 of 33 people found the following review helpful
Durability:
Educational:
Fun:
I keep my BS button by my desk. Whenever someone comes to me with a ridiculous question, an absurd assignment, or opinion that they should have left at THEIR desk, I push my BS button. Nothing clarifies communications, shortens discussions, or moves managers along faster than a healthy does of "That Was BS!"
15 of 19 people found the following review helpful
Durability:
Educational:
Fun:
I love it! The first time that I saw the BS button was when a co-worker brought one in that he bought locally. Another co-worker of mine found the BS button on Amazon; I immediately ordered two. The one that I intended to keep for myself is now a fixture in one of my hangouts and gets heavy use and my significant other has the other one, which has also seen heavy use. I heartily recommend the BS button as a fun thing & recommend DollTV as the place to buy one.
Most Recent Customer Reviews
This cracks me up everytime!
When I found it on amazon, I fell in love! They say laughter is good medicine. Everyone I've showed it to, starts laughing. I did, however, experience some malfunction at first. Read more
Published 1 month ago by Keepin it real!
BS Fun!
This is the second BS button I have owned, the first one was a gift and my family had so much fun with it that we passed it forward to a friend and then decided to purchase a new... Read more
Published 1 month ago by FrankieTwoSocks
Funny for the right situation
It's funny. It says several things. It's the perfect device for when you are sitting with family and that certain uncle that tells long drawn-out stories is telling a long... Read more
Published 2 months ago by Beavis Comeavis
It's hilarious....
Pretty funny little gizmo. Great gag gift.
If you've got a Staples-type button collection going, then you MUST add this one to your display shelf.
If you've got a Staples-type button collection going, then you MUST add this one to your display shelf.
Published 3 months ago by Linda Decelles
Battery heads up but fun after.
It arrived not working, so I read the "instructions" on the back of the package it came in, and the batteries are listed as "temporary." Luckily I had a few AAA's in the house. Read more
Published 3 months ago by Profguy
Battery problem
I ordered two of these. One is OK and the other did not work. I opened up the battery cover and found one of the batteries had leaked, coating the contact spring with gunk that... Read more
Published 3 months ago by Marc Hertzberg
Funny
Bought as a joke gift for a friend and VERY FUNNY. Have no idea how long it will last and it certainly is NOT educational but gosh it is funny!
Published 3 months ago by Paula L. Mueller
funny but battery issues
Funny little toy. Great for conference calls.
But, will not work when you try to put new batteries in, so it looks like it will only work as long as the original... Read more
But, will not work when you try to put new batteries in, so it looks like it will only work as long as the original... Read more
Published 3 months ago by Robert H
Bully for this gift!
The perfect gift for someone with an "off-the-wall" sense of humor. Loved it so much I didn't want to give it away!
Published 3 months ago by Rosemary
BS
This was bought to add some entertainment to the office. Everyone couldn't wait to hit the button especially when it applied to a situation or conversation going on in the office.
Published 4 months ago by TH
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
Listmania!
|
|
So You'd Like to...
Look for Similar Items by Category
|
