Customer Reviews

TimberWolf XtreeM Caster Board

5 star:		(2)
4 star:		(1)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

This is a description of most types of boards based on the experiences of my son (15), my daughter (9), and me (48):

Skateboards - Fun for jumping tricks (grinds, board flips, etc.). Casterboards are more maneuverable and fun than skateboards on a street, but less fun at skateparks. Soularc Skateboards have one curved deck on top of another for a springy carving feel. Flowboards have 7 wheels in a semicircle in front and 7 wheels in a semicircle in back for a snowboard feel. Sole Skates are small, three-wheeled skateboards. Longboards are longer and wider skateboards.

RipStiks - Like skateboards but with two small decks connected by a crossbar, and two inline casterwheels which swivel 360 degrees. Seems safer than skateboards because RipStiks don't easily shoot out from under you (they just flop onto their sides). The wheels might show some wear fairly quickly, but even with flattened wheels they're way more fun than skateboards for zipping around on the street. We're able to take apart our RipStik casters and clean them, but not our Wave Board casters, giving RipStiks an advantage over Waves. RipStik Gs have metal crossbars for doing grinds. RipStik Airs are molded into a single piece of plastic, and feel stiffer than RipStiks. Ripsters are smaller to fit younger kids.

Wave Boards - Like RipStiks, but with shorter crossbars. Makes more of a "clatter" noise than our RipStik. Wave Ripples are smaller to fit younger kids. ExBoards, X-Boards, EssBoards, VigorBoards, Cudas, Freeriders, and eXtreme boards are similar to RipStiks/Waves.

WhipTides - Like RipStiks, but with four inline casterwheels. The crossbar bends up-down and side-to-side, unlike RipStiks. Can do tighter turns and slaloms than RipStiks. Can't do jumps or lift one wheel off of the ground. There's a slight "wiggle" motion as you go faster. I'm more aggressive on RipStiks since they don't wiggle, but my daughter prefers the wiggle because it helps her get moving. Shred Sleds and Alive Boards are similar to WhipTides. Hurricane Boards and Cycle Force Swingboards appear to be WhipTides with only two inline casterwheels.

Xgliders (Xliders) - Have two separate (unattached) casterboard decks, so they're a bit tricky to learn and easy to lose your balance or do the splits. Can do different tricks and tighter turns and slaloms than RipStiks/Waves/WhipTides. You can't just step on and go, like with RipStiks. Instead, you place the two decks onto the ground, carefully step on one at a time, then go. RipSkates are like Xgliders, but with a removable crossbar. I made a RipSkate clone by bolting a crossbar between our Xglider decks, and it's very fun because it allows you to do tight turns (even better than a WhipTide) without the danger of your feet going in different directions. RipSkates provide two different riding experiences for the price of one. Freeline Skates are similar to Xgliders, but the wheels don't spin 360 degrees. OrbitWheels have separate decks as well, but your feet are *inside* the wheels.

PowerWings - Have safer features than RipStiks (two casterwheels in back plus a wheel in front for stability, and handlebars with brakes). You face forward and move your hips side-to-side, but on casterboards you face sideways and use a twisting movement with your hips. It's easy to lean too far back and flip over, but with practice this allows doing wheelies. Some PowerWings have safety bars at the back to prevent flipping over. Rip Rider 360s are similar, but they have a big plastic wheel in front with pedals, and kids ride them sitting down. Trikkes and "Slider The Unscooter" are also three-wheeled, but with unique methods of propulsion.

Bladeboards - Like RipStiks, but the casters are designed differently. We cleaned and lubricated the casters, and put in new bearings, but it still feels sluggish and noisy compared to RipStiks. Bladeboards don't appear to be sold anymore.

PumpRockrs - Skateboards with one casterwheel in front. Can't make tight turns like casterboards can. T-Boards are skateboards with two casterwheels, but don't appear to be as maneuverable as RipStiks. OBoards appear to be PumpRockrs.

TimberWolf XtreeMs - Similar to RipStiks, but the casters are designed differently. My kids and I are experienced riders, but we felt cautious at first because the TimberWolf is quite a bit faster and more maneuverable than RipStiks/Waves/WhipTides. The casters can go forward or backward, so you can swap ends as you ride, and do 360s. RollerSurfers have different casters, but they also allow you to swap ends and do 360s.

Streetboards - Like skateboards, but the decks are in three sections. Your feet rotate the outer sections to propel the board, and you can strap into bindings on the footplates (optional). Good for jumping tricks (grinds, etc.), but not as maneuverable and fun as casterboards on the street. Snakeboards are shorter versions of Streetboards. It took us several days to figure out how to ride our Snakeboard because the movement is different than with casterboards. Our RipSkate clone is everything that I had hoped the Snakeboard would be. Alterskates had a similar rotating mechanism to propel the board, but no-one at their website responds to emails. LandSharks are kneeboards which you propel similar to Streetboards (using a handlebar).

Bottom line:
We own a skateboard, RipStik, Wave, WhipTide, Xglider, RipSkate clone, Bladeboard, TimberWolf, and Snakeboard, and we've ridden a RipStik G, RipStik Air, PowerWing, PumpRockr, Flowboard, and LandShark. Our favorite boards are: RipSkate, TimberWolf, WhipTide, RipStik, and Wave (in that order). To do carving/twisting/turning/spinning around the street, casterboards are best. To do jumping tricks, skateboards and Streetboards are best. At skateparks, skateboards are best.

About the wheels:
We replaced our worn-down RipStik wheels with two good wheels from our Xglider, and put the flattened RipStik wheels onto our Xglider. Strangely, we didn't notice much of a difference in the feel of the RipStik or the Xglider. After 20 minutes, the rear wheel on the RipStik had worn down a bit, but RipStiks/Waves are fun even when the wheels are flattened (until it becomes excessive). The wheels on our other boards don't seem to wear down very quickly.

For some videos of my kids and me playing a casterboard game that we invented, search for "Caster Soccer" at YouTube. Another fun game is playing "tag" on casterboards. We wear protective gear when trying new boards or tricks. Skate safely!

the only thing i disliked, is that the quality doesn't seem as high, as the price would suggest...
it just lacks the finishing touches to make it look great. that being said, i love it.

it is made of hard, firm materials, and everything sticks in its place.

It is tons of fun. Perfect if u like free-styling. It may not be the fastest thing around,but if u put your feet on the boards , inside the span of the wheels , and put your back into it, with short rotating movements, u will be amazed by the speed u can develop. I especially recommend stretching your arms out, for better leverage.
and if u are riding downhill, it can build up real speed, although be careful... i still don't know how to break on this thing ... :(
but u ll be able to overcome it by its great manoeuvrability.

bottom line 4 out of stars, it is a great product, they should just pay more attention to the finishing detail.

OK my dad bought me this for my B_DAY and i love it it got shipped a little late but it did get here on time. this caster board is a little hard to get used to but once you do its awesome. it is longer than a RipStik but it is also faster more manuverable and its just cool. ive beat my frinds in races all the time you cant grind though.

Pros: smooth, fast, light, easy, fun, EVERYTHING ELSE I HAVENT NAMED!!!


Cons: a little hard to get used to, you dont have 1



=D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D =D