From the Manufacturer
Tormek SVS-50 Multi-Jig is used for an exact replication of the shape on turning skew chisels with a straight or curved edge. Thanks to a unique design, the jig also copes with oval section skews, as well as for parting and beading tools and roughing gouges. Use this Jig for straight carving gouges up to 2-inches wide, and a maximum width of skews at 1-1/4-inch. This patented jig consists of a housing and two interchangeable seats – one closed, and one open. The seats can swivel and be locked with the screw at any skew angle between 0-and-45 degrees. Skew chisels have symmetrical bevels on both sides. With this jig you mount the tool only once for grinding both the bevels, and by turning the jig upside down, you can grind both of the bevels symmetrically.
This jig works with both the Tormek T-7 and T-3 sharpening systems to sharpen carving and turning skew chisels, parting tools, beading tools, and roughing gouges. Jig consists of a housing and two interchangeable seats: one closed and one open.