on September 26, 2013
This is the awaited follow-on of the EdgeRouter Lite (which I reviewed earlier). As of this writing, Ubiquiti hasn't packaged the POE router with a 48V power supply (necessary for "standard" 48V POE), but Ubiquiti forum comments suggest that the Meanwell GS60A48-P1J does the job (available on amazon.com, as well as elsewhere at somewhat less cost).
The same day it arrived, I configured and installed the EdgeRouter POE to replace my existing Cisco home gateway, but not the two external POE power supplies needed for an IP telephone and a wireless Access Point. Today, I received the Meanwell power supply and installed that, finally achieving the goal of eliminating a clutter of extra adapters and cables. Everything is working great.
Note that not all LAN ports on the EdgeRouter POE are created equal. Three of them (eth2-eth3-eth4) can be configured as a fast hardware switch. In principle, this switch could be grouped using a software bridge to allow all your LAN ports to reside on the same subnet. It turns out that the current version of EdgeMax, v1.2.0, has an issue that prevents that particular configuration from working. So I'm running with one WAN port, the three LAN ports as a switch on one local subnet, and the remaining LAN port on a different local subnet. Although this setup is not a handicap in my setup (the outlying LAN port just has the IP telephone), it might bother you, for example, if you were trying to run Windows Home Group clients on all four LAN ports. Ubiquiti reports that they are aware of, and working on this issue.
Another ongoing learning activity for me with this router will be setting up wide area IPV6 connectivity. Comcast requires support of Prefix Delegation, which is apparently still a work-in-progress for the firmware. It will be interesting following that work, and in the meantime, maybe getting my 6to4 Hurricane Electric tunnel back up and running.
*** UPDATE 12-Mar-2014 ***
Since my original review the unit has continued to perform trouble-free. There have been two operating software updates since then, the first of which corrected the software bridge issue mentioned. During this time, I learned a lot about the Vyatta-based software and it was straightforward to configure the 6to4 tunnel. More recently, I focused on getting the Comcast native IPv6 service running, since the router software includes the required dhcpv6 client package albeit not activated. Now, after some troubleshooting, Comcast native IPv6 is running here (details posted on the community.ubnt.com site).
on June 14, 2014
TWC surprised me for the first time in 11 years since I have service from them and gave my solid bump in speed for the same price - I went from 30/5 to 200/10Mbit. Since my old venerable ASA5505 has 100Mbit ports only (and it is really not a router but rather security appliance with some routing), it was time to start looking for something faster.
I did some research online and looked at Cisco, Fortinet, Sonicwall, Watchguard and some consumer grade devices that are compatible with DD-WRT (like Netgear Nighthawk 1900ac). I even purchased the Nighthawk and returned it next day.
Then I discovered Ubiquiti EdgeRouter which turned out to be a an overrated big disappointment with the current version of OS, especially its web based configurator. I must say that I own and use both UniFi and ToughSwitch that I am extremely happy with.
Got both EdgeRouter ERPOE-5 and EdgeRouter Lite based on positive reviews here on Amazon. It was easy to do the basic setup, and couple wizards to walk you through some basic configuration like dual WAN setup.
It appears that most of the owners of EdgeRouter that are so excited with this product are folks coming from unreliable home-grade devices. It is cheap, stable, relatively powerful in terms of routing power.
But that's all about it.
The GUI is awfully limited to very basic functions. You'll have to use CLI to accomplish more complex config, and good luck if you believe (or rely) on the Web to get your answers. There is not too much info or configuration examples/manuals/guides for EdgeRouter.
My previous device was Cisco ASA5505 SEC+ (purchased it new at fleabay for twice the amount ERPOE-5 cost) but it is simply in different category. I would say that EdgeRouter at this moment (with current firmware) is a definite step above home grade devices but it is simply not comparable to Cisco or Sonicwall, both in terms of GUI and as OS.
Good news is that the GUI is work in progress and it is getting better. But it is years behind ASDM or even Sonicwall. Or ZyXELL.
There is not much one can do via web interface so for some advanced routing or FW you'll definitely need CLI. It is not a problem, the problem is that because the EdgeOS is relatively new, only a small group of users use it. And this limit your options to get a support when you need it.
After struggling for couple days (that includes my attempts to implement the same configuration I had on my ASA5505 that was relatively complex with many FW rules (a real pain in the a$$ to implement in EdgeOS), filtering, some routing, VPN, VLANs etc. etc I just decided that this device and EdgeOS, especially its GUI is simply not mature enough for me. Both ASA5505 and SonicWALL NSA 220 I own use objects to define various elements.
I've decided to return EdgeRouter and got ZyXELL ZyWALL 110 instead which I am currently testing. It is not Cisco or Sonicwall, but it is not much more expensive than EdgeRouter, it is much easier to setup and manage. And it has decent GUI in addition to CLI.
I am definitely going to follow EdgeRouter evolution in a year or two to see how it goes. I hope by then they'll catch up with all modern standards, including router's GUI management utility.
P.S. Few words about EdgeRouter Lite. It is small brother of ERPOE-5, uses the same CPU, memory and OS. Unlike ERPOE-5, the case is plastic and gets hot, especially on the bottom where the heatsink plate blocks ventilation openings, and power supply is cheaply made. It also has less ports that are not PoE. It is probably good device if you're making your first step from home grade device and willing to learn.
on November 21, 2013
My first Ubiquiti product and arguably the best router I have ever owned. When Ubiquiti brought on a few Vyatta Engineers after Brocade's purchase of Vyatta I was intrigued. Software defined networking is the new rage and Vyatta was my go to network operating system. EdgeOS was born as a result, which at it's core is Vyatta re-branded and reinvented. When paired with the fantastic hardware that Ubiquiti is known for you have the EdgeRouter. With quality hardware and robust software this is a match made in heaven.
There are a host of features that you won't find in other options at this price range on the market. You'll find basic and advanced features ranging from IPv4/v6 addressing/routing, DHCP client and server, VLANs Static routes, OSPF, RIP, BGP, Firewall (ACL-based and zone-based), NAT, QoS, VPN: IPsec, L2TP, OpenVPN, PPTP client and server; PPPoE client and server, bridging, bonding, GRE, VRRP, Dynamic DNS, DNS forwarding, DHCP relay....blah blah blah. Although most of the features are not accessible at this time via the GUI, the most common ones that are manageable via the GUI are: DHCP, NAT, Firewall, OSFP, PPOPE, Routing, DNS, certain aspects of VPN and a few other things. I'll include a large list of the main features that are a part of EdgeOS at the end of this review, most of which are accessible through the command line.
The Ubiquiti community is alive and thriving. Their forums are buzzing with activity and people are ready to answer questions and help you. By default the system is not configured, but don't worry for those that aren't skilled with the command line there is a setup wizard that configures your device for a commonly used setup taht has a WAN port, LAN ports and basic firewall and NAT. Once you log in to your router it's literally three or four mouse clicks to get the basic config up and running. If you struggle with things don't panic, just ask for help in the forums.
As for the advanced features; they are definitely for the Command line savvy, although those without skill in this area can use community provided config files to add functionality. One of the newest feature they are adding in v1.4 of EdgeOS is a way for community members to create and share their own custom GUI features. Basically you'll be able to add GUI level access to features that would normally only be accessible via the command line. Once the community gets it's hands on this expect more accessibility for users that don't know their way around the command line.
As other reviewers have stated be sure you know what voltage your POE devices support. This does ship with a 24v adapter because that is what Ubiquiti hardware is spec'd for, although the industry standard is 48v. Don't damage your equipment by using the wrong power.
I'll update this review once I've tested more features and run it through it's paces.
1. Outstanding hardware (build quality) and software (capabilities) which make for phenomenal performance all around.
2. Lots of features that you won't find even close to this price range when looking at other options.
3. Decent online documentation in forum and wiki/knowledge-base.
4. Basic setup wizard for those that want something quick to get them up and going, while they learn more.
5. Has a an active community behind it that is ready to help others find their way around the product.
6. Power over Ethernet at this price is a steal, especially with everything else you're getting.
7. Active software development, adding new features and enhancing existing ones.
8. Basic live port level monitoring in the GUI that shows outgoing and incoming traffic.
9. Huge list of features that most people won't use but are available if needed.
1. Not yet very accessible for non CLI oriented people, (at the time of this review).
2. Doesn't come with stock configuration, most advanced users don't care, but for those learning this is an obstacle.
3. Currently has limited GUI access to advanced feature, but most users that will use these features know how to use CLI.
4. Doesn't come with a 48v power supply, so if you use non Ubiquiti hardware get a 48v power supply.
5. Just an FYI: UPnP support is a little buggy right now, as of v1.3 of EdgeOS. They will eventually fix this.
****The longer list of Feature is as follows****
802.1q VLAN, PPPoE, GRE,IP in IP, Bridging, Bonding (802.3ad)
Static IPv4/IPv6 Addressing, DHCP/DHCPv6
Routing Static Routes:
OSPF/OSPFv3, RIP/RIPng, BGP (with IPv6 Support), IGMP Proxy
ACL-Based Firewall, Zone-Based Firewall, NAT
IPSec Site-to-Site and Remote Access, OpenVPN Site to Site and Remote Access, PPTP Remote Access, L2TP Remote Access, PPTP Client
DHCP/DHCPv6 Server, DHCP/DHCPv6 Relay, Dynamic DNS, DNS Forwarding, VRRP, RADIUS Client, Web Caching, PPPoE Server
FIFO, Stochastic Fairness Queueing, Random Early Detection, Token Bucket Filter, Deficit Round Robin, Hierarchical Token Bucket, Ingress Policing
Web UI, CLI (Console, SSH, Telnet), SNMP, NetFlow, LLDP, NTP, UBNT Discovery Protocol, Logging