This powerful, low cost pump works in almost any water feature requiring high lift and a powerful water flow. It offers an output of 290 GPH and a maximum lift height of 6-1/2 feet. Measuring 4-3/8" X 3-7/8" X 3-7/8"H, it uses only 17 watts of energy. It has an epoxy sealed motor for safe and long life and a 12 foot, heavy duty cord with a grounding plug. Other features are a high-powered magnetic rotor and a ceramic shaft and case. This is a pump that is fully submersible yet, with proper design, can be used out of the water as well. It can be used with either fresh or sea water and is well suited for use in statues, ponds and fountain designs. The pump has an adjustable flow and four rubber feet on the bottom for quiet, steady operation. It is designed with one moving part for trouble free operation and the only maintainence it requires is an occasional cleaning of the impeller and filter cap. Easy to install, it only requires an outlet to plug into and a suitable length of tubing for your project. U.L. listed, it is warranted 1 year by the manufacturer and will provide safe, low cost and efficient service to enhance your water feature project. For hundreds more craft, art and hobby products including fountain pumps with other capacities please visit our National Artcraft Storefront. We have the creative components you need.
