Specially formulated with a unique blend of resin and refined natural linseed oil to provide a superior natural finish for bare wood. This distinctive product not only sustains the natural beauty of exterior wood, it also provides excellent wood penetrating protection against the sun and all damaging weather elements. It's water repellent, to keep moisture out and guard against warping and checking. Easy to apply and requiring just 1 coat, the toned stain slightly darkens wood when first applied, leaving a flat and translucent amber toned finish. The finish then slowly weathers with time to a natural wood hue depending upon the particular wood type on which it was applied. Cabot wood toned deck and siding stain is for use on new or reconditioned wood only, including decks, siding, shingles, shakes, trim, and on log homes. Cabot wood toned deck and siding stain can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce, and redwood, and will produce outstanding results on all premium grade lumber. It can also be applied to weathered pressure treated wood. Covers approximately 400 sq. ft. to 600 sq. ft. per gallon; on rough surfaces, 200 sq. ft. to 300 ft. ft. per gallon. Do not thin this product. Do not tint this product. Do not apply over hardboard, siding, previously stained, painted, or sealed surfaces or adjacent to fresh stucco. Apply only with a natural bristle brush or pad to deck surfaces. Apply with natural bristle brush or professional spray equipment on siding and other vertical surfaces. When spraying, always back brush immediately to ensure uniformity. Banned item in OTC, LADCO, CARB, SCAQMD California. Refer to SKU 781908 for VOC compliant.
