Customer Reviews

Vantage Point CGUPM06-S Universal Front Projector Mount - Silver

5 star:		(13)
4 star:		(11)
3 star:		(2)
2 star:		(0)
1 star:		(0)

 

 

I used this ceiling mount for my Sony VPLAW15. The hardware is strong and simple, let me say again, simple to put together. You can't beat the price either.

It literally took around 30 minutes for installatin, including drilling the holes, finding the beam, etc. The instructions are pictures only, no dialogue, but plenty sufficient. It comes with all the parts needed to mount your project. I would highly recommend this mount.

I mounted my Optoma HD70 on the ceiling and it couldn't have gone better. I was actually able to use the mount without the middle extension bar as I mounted my HD70 directly on a sloping ceiling and exactly in the middle, left to right, of the screen. My HD70 has a very low profile to the ceiling. The sloping ceiling allowed some additional access to the adjustment screws.

The only improvement that I can see being made would be to put rubber feet on the three extension legs that tighten into the projector to allow for some vibration dampening and for the screws that slide through the extension legs to fit more snug inside the legs.

I was pleased with this product from the time I pulled it out of the box to full instalation and use. It is well manufactured and is very sturdy. I would recomend it to anyone.

good price, easy to put together {read the instructions}, no problems at all. get this item

Great Product, Easy to install, cost effective and great manual.

I have installed Sanyo PLV-Z60 projector in my Media room it works greats. To fix projector to the mount you might have to buy three screws, as provided screws are small. Secondly make sure the Stud is in center of room as top 3 screw fit in one line.

Easy to install, holds projector steady, very solid mount, very pleased with the way it looks and works. Would recomend this product.

I looked at some cheaper mounts but I found there were people who had to modify the cheaper mounts to get them to work properly. I wanted a mount which didn't require a dremel and skill.

This Vantage point mount was somewhat easy to put together, its low to the ceiling and comes with the needed wrench. The mount is more than enough for my projector Vivitek D512-3D 2600 Lumen SVGA HDMI 120 Hz 2D to 3D Portable DLP Projector so I don't have any issues. Just make sure you follow the easy directions.

I used this to mount an Epson PowerLite Home Cinema 8350 (V11H373120) projector to the ceiling and it worked great! The universal brackets allowed me to match up with the holes on my Epson. The mount is very sturdy, mounted to a joist in the ceiling. After the projector was hung it was easy to adjust right/left/up/down to center the image on my screen. I have had no issues!

This is one of the best looking projector mounts I've seen. It is very adaptable, and the quality of materials and construction is very good. Installation was easy, although fine tuning the projector angles took some time. The projector is stable and secure on this mount.

I give an A+ to Vantage Point--I called them before I bought this to see if it would work for a projector (NEC NP2000) with 4 mounting points instead of 3. They said it would, but they happily sent an extra set of arms and mounting hardware for me to use, free of charge! And they sent it before I even purchased the unit from Amazon. They also have a great website.

Cons:
- Doesn't have a quick release
- One of the adjustment screws is already starting to strip because I've made a lot of adjustments--maybe I'm just cranking down too tightly.

I bought this because it said "Universal" but it wasn't quite universal. I have a small optoma projector (http://www.amazon.com/gp/product/B002DUCKNK/ref=oss_product) with only three screw mount holes in the bottom. I found no way to mount my projector and had to return this item.

It seemed like a fine product if it fits your machine.