Vibra-TITE VC-3 Original is a powerful locking and sealing coating for threadedfasteners that works on the principle of "friction through viscosity." It utilizes a special blend of acrylic resins to prevent fasteners from loosening - even under extreme vibration. Designed for use on external and internal threads of virtually any material or finish, Vibra-TITE VC-3 Original dries to the touch within seconds of application coated parts are ready for assembly in just a few minutes. Pre-cleaning of parts is not required except for wiping off any visible oil, grease, or dirt for optimal performance. From tiny eyeglass screws to huge construction bolts, ideal for use on fasteners of any size. Excellent Shelf Life: Parts coated with Vibra-TITE VC-3 Original can be stored indefinitely before use. Versatile: Vibra-TITE VC-3 Original adheres to both ferrous and non-ferrous metals, most platings, wood, and plastic screws. Creates a Reliable, Powerful Lock and Seal: With exceptional reliability, Vibra-TITE VC-3 Original holds parts in place even during extreme vibration and resists leakage by acting as a dam between mated threads. Offers Multiple Reuses: Using steady pressure and standard hand tools, parts coated with Vibra-TITE VC-3 Original can easily be adjusted, removed, and reused. Methyl ethyl ketone Solvent, Resilient plastic Cured form, Indefinite (under ideal storage conditions) Shelf life, Offers resistance to most solvents (acts as a partial corrosion barrier) Chemical resistance, Water and Salt water Total resistance, Dries to touch In seconds and Dries for use In minutes, Best achieved using considerable airflow in addition to temperature not exceeding 130 degree F Drying method for bulk production, 5 or more times reusable, moderate engagement torque, no distinct break; slow, fluid release as material cold flows Breakaway, 1-1/2 times diameter Standard coating length, 30 - 50% of the thread root area Thread fill requirement. 250 ml Can.