Top positive review
183 people found this helpful
Excellent low cost movable arm
on October 4, 2010
This flat panel mount is adjustable and very cost effective, an excellent product for the money. This arm comes with all needed mounting hardware for either masonry or wall stud mounting as well as a set of 4 screws for several sizes of panel mounting screws. It also comes with a small wrench for two different sizes of hex heads on the arm and an allen wrench for one of the arm adjustments. It is at least a two man operation to attach the flat screen after the arm is attached to the wall. I mounted mine on a stud in the wall. For stud mounting you use two of the six mounting hex head lag screws that come with it. It doesn't say exactly in the directions but you should use a 1/4" drill bit to pre-drill the holes in the stud. I would not recommend trying to use the included hex wrench to tighten down the wall mounting lag screws, you need more leverage to tighten it than it provides; use a crescent wrench or other longer hex wrench. I used a stud finder to locate the studs accurately. Make sure you do not have obvious pipes or electrical going through the wall at the chosen location. They can throw off some stud finders. If you want to quickly adjust one of the arm adjustment screws it also contains a replacement screw that has a slip bar top lever so that it can be loosened and tightened without a wrench. There is one optional cable management loop that attaches to the bottom of the middle of the arm. It could use one more at the wall, but that is easy to improvise. The flat panel we have is 32" and 25 lbs. and works well for the mounting arm.
I really like this product for this price.