The Radial Drill Press is one of the most versatile and handy drill presses you can add to your shop. Between the tilt of the head and the tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add to this an incredible swing which allows you to bore to the center of a workpiece that is 34-inches wide and you have one of the best values available in a drill press.
This drill press offers the ability to drill wide workpieces up to 34-inches diameter, you can slide the headstock in and out to increase the distance between the drill chuck and the column up to 17-inches. You can also tilt the headstock from 45-degrees clockwise to 90-degrees counterclockwise for drilling angled holes or for horizontal boring machine use. Using the slide and tilt features, you can drill a line of straight or angled holes without the need to reposition your workpiece after drilling each hole.
The W1669 features a precision ground cast iron table that features adjustable tilt from 90-degrees both left and right. The table can be adjusted for height and angle making this an extremely versatile machine capable of many applications. This drill press also features a safety paddle switch which provides a greater degree of safety over other types of 110 volts on/off switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.
The W1669 Radial Drill Press has been specially designed by to provide many years of trouble free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.