Customer Reviews

12" DUAL WHITE COLD CATHODE LIGHT KIT MOD CASE CCFL ULTRA BRIGHT 12V 12 INCHES PC COMPUTER LIGHT

5 star:		(6)
4 star:		(3)
3 star:		(2)
2 star:		(2)
1 star:		(0)

 

 

I drive an older truck, and I was having trouble with my curtesey lights, and while shoping form my computer I found these, and noticed they run on 12V, like the truck, and thought, Hey, $7, could be fun.

I removed the Yellow, and ajacent black wire from the MOLEX connector, and plugges them into the light socket, and it worked. I mean really worked. OMG these are bright! and run WAY cooler than the old incandecent kits. I'm going to get a 4" single now for my map light, and may install one in the dash for my instrument panel.

I wanted white lights for my case for 2 reasons One is they help me see everything inside the case clearly and two the white lite looks classy compared to blue and red ...installing cathodes was simple and easy but the velcro tape is cheap i would use better velcro tape as the stuff that comes with this tends to fail fairly quick

After receiving the two lights and hooking them up to a DC 12 V supply from a deep cycle Marina battery I was pleased to see my solar lighting was working well. Until... they stop working, I took out my multimeter and found out the irreplaceable glass fuse inside of the blue box that had came with the lighting, had blown. I was disappointed. I went ahead soldered jumper link and the back lights fired back on. My friend who installed the same system in his house had the same issue two months after use. I'm not sure what's causing it, but if your life suddenly die you know what to look for

Product is as described, puts out plenty of light. I mounted them in my trunk to replace the factory lights and am very pleased.

This light is very easy to use, the wiring is idiot-proof and it is a very bright light. I love this product and will defiantly be purchasing from this company again.

These work very well for under counter lighting when used with 120V-to-12VDC transformer. Replaced included velcro with HD velcro from Radio Shack.

I must say, installing these was obnoxious. I wanted to put one on the top of my Corsair 500R case and one on the bottom. But the cables weren't long enough. And it has like a converter that I put on the back of my case because it was blue and ugly, it barely fit.

It also came with some Velcro tapes to install it, they are low quality and I had to tape them (with normal tape) until I get a new Velcro tape.

Other than that, they're great.

This is what I would rate it.

Installation: 3/5

Lighting: 4/5

Quality: 3.5/5

Did I mention they are bright? For $10 including shipping, I am highly impressed. I purchased them to light up my Corsair 600t case. What isn't shown is the blue inverter box, small back panel on/off switch and the molex power connector. Dead simple to install. I think it was designed for older computers though, the back panel plate is too large for my modern case. Not a deal breaker though, if you are nifty you can just remount the switch. The actual wiring, switch and blue box appears to be lower in quality (90's era) but they get the job done. You also need some double sided tape, velcro or zipties to mount the lights. I plan to go full DIY by putting the blue box and power switch into a 5 1/4 drive bay to dress it up. Oh by the way, they are very bright!

You connect the pair of LED lights to a power adapter, which in turn is connected to the power supply. you get Velcro adhesives to attach this to the case. I attached the to my Cooler Master HAF 932 case, and both the lights and the power adapter fell within an hour. I had to secure them with zip ties now.

Other than that, it does the job

This truly incredible neon lights around the inside of the case with acrylic of my computer. I also install "Sunbeamtech Rheobus fan and light controller Black Sunbeamtech Rheobus" (this is the link http://www.amazon.com/gp/product/B000MGLIQ2/ref=oss_product) fan and light controller Black and operate with great