- NEVER EMPTY THE BUCKET AGAIN! THIS KIT PROVIDES STEADY DRAINAGE TO A UTILITY SINK, FLOOR DRAIN OR
- SUMP PUMP BY PUMPING UP TO 18 VERTICAL FEET FOR CONVENIENT DRAINING THROUGH A WINDOW. PACKAGING
- INCLUDES EVERYTHING YOU NEED FOR IMMEDIATE USE, INCLUDING: PUMP, 25' OF PLASTIC TUBING, HOSE
Product Features |
Product Details
Would you like to give feedback on images?
|
Product Description
From the Manufacturer
Never empty the bucket again! This kit provides steady drainage to a utility sink, floor drain or sump pump by pumping up to 18 vertical feet for convenient draining through a window. Packaging includes everything you need for immediate use, including: Pump, 25' of Plastic Tubing, Hose Clamp, Mounting Clips, Dehumidifier Hose Attachment, Install Instructions. This pump conveniently attaches to most major brands and works on all dampness levels.
Product Description
NEVER EMPTY THE BUCKET AGAIN! THIS KIT PROVIDES STEADY DRAINAGE TO A UTILITY SINK, FLOOR DRAIN OR SUMP PUMP BY PUMPING UP TO 18 VERTICAL FEET FOR CONVENIENT DRAINING THROUGH A WINDOW. PACKAGING INCLUDES EVERYTHING YOU NEED FOR IMMEDIATE USE, INCLUDING: PUMP, 25' OF PLASTIC TUBING, HOSE CLAMP, MOUNTING CLIPS, DEHUMIDIFIER HOSE ATTACHMENT, INSTALL INSTRUCTIONS. THIS PUMP CONVENIENTLY ATTACHES TO MOST MAJOR BRANDS AND WORKS ON ALL DAMPNESS LEVELS.
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
22 of 22 people found the following review helpful:
5.0 out of 5 stars
Whirlpool Dehumidifier Pump Kit Kit #8212501,
By samoo451 (ny usa) - See all my reviews
Amazon Verified Purchase(What's this?)
This review is from: Whirlpool 8212501 PUMP-DRAIN
After 7 seasons of removing water from my dehumidifiers by hand I was ready to try a product like this.
The idea behind this product is simple.It works on the same principle as a sump pump.When the water reaches a certain point in the pumps well area,a quick burst of pumping action causes the water to flow up a hose and out to wherever you route the end of the hose-in my case through a drilled hole outside my basement area to the outside of my house. Installation was easy enough.I simply cut the hose to my needed length,attached it to the unit,attached the other hose connection to my dehumidifiers hose connector (for condensation that comes out of the actual dehumidifier) and plugged the unit in.Let me mention(no laughing please)that I broke my nose during this simple installation by having too tight of a hole drilled to the outside for the outtake hose.I was pulling the hose with a needle nose plier to pull through the hole and ended up smashing my nose when the plier slipped and my knuckle came smashing on to my nose.I needed a nose job anyway... Anyway,the unit works really well and now I can leave home for days at a time and know that my basement is at a safe 45% humidity level.Without the unit turned on it would be twice that amount at least. Just be aware that the dehumidifier pump needs to be physically lower than the dehumidifier.The gravity will force the condensation down the hose in to the dehumidifier pump.I made the mistake of leaving both level with each other and found the the water was just building up and began running out on the the floor. Besides the pliers hitting my face (I`ll remember it every time that pump turns itself on) and having to figure out that gravity needs to be used to make things work correctly, I am so happy with the results. If it lasts a few years it will be worth the 96 $ (shipping included) I paid for the pump. Editors note- It is now Oct of 09` and the pump continues to work perfectly. It has been on for the last two seasons (Apr-Oct of 08 and 09) and still no problems. 2nd editors note-It`s now May 2011 and unit still working perfectly
4 of 4 people found the following review helpful:
3.0 out of 5 stars
Impeller shaft broke after 3 years,
This review is from: Whirlpool 8212501 PUMP-DRAIN
This pump worked as advertised several years but, as others have written, the plastic connection between the impeller blade and the magnet that the motor spins broke. This caused the motor to stay running but not pump anything. No harm done as I have a water sensor on the floor that alerted me to the overflowing reservoir. Tried using epoxy to fix it to no avail.
4 of 4 people found the following review helpful:
2.0 out of 5 stars
Cheap Parts & Unreplaceable,
By
This review is from: Whirlpool 8212501 PUMP-DRAIN
I agree with "Broke": after less than one year, the plastic impeller shaft assembly disintegrated.
Share your thoughts with other customers: Create your own review
|
|
