With the 2.4Ghz technology, this backup camera achieves a signal distance of up to 30". This is great for not only installing it onto cars and trucks, but also on the 5th wheels and motor homes. The monitor has a clear color 3.5" LCD screen that is very easy to set up, and has many convenient features, including A/V cables that allow for the connection of media and game devices, a headphone jack for use when watching a DVD or playing a game, and mini USB port for use when charging devices like cell phones, IPOD, MP3 players, and digital cameras.
The monitor also has features that allow you to change the rotation or plane orientation of the picture, and adjust the contrast and color just as you would on a television. Additionally, there are multiple mounting options for mounting the monitor. Included are visor mounts, air vent mounts, headrest mounts, and dashboard mount. The camera is completely wireless (in that it sends a signal from itself to the monitor in the front of the vehicle), with only minor installation required. It not only works during the day, but also at night by changing into a night vision camera when no sunlight is detected, thus giving the user 24 hour usage capabilities.
NOTE: The purpose of this unit is to be used to assist in safe reversing and parking, and should not be a replacement for safe driving practices.
Camera InstallationInstallation is simple; you only need to connect two wires in order to begin using the product.
The camera comes with three wires, power, ground, and an antenna. Connect it to your vehicles backup lights by connecting the power and ground wires to those connected to your backup lights. The power and ground colors vary by vehicle model. The antenna does not have to be wired to anything. Instead, just find the best place for it by moving it around until it is sending the strongest and clearest image to the monitor. Once the wiring is completed, place the camera to the back of the license plate by using the included double sided tape.
Monitor InstallationThe monitor has two installation options. You can simply plug it in to your 12V AC port, or you can hardwire it using the included wire harness. The wire harness has three wires; power, ground, and an interrupt wire. To connect, you can connect the power and ground to any other power and ground in the vehicle. The interrupt wire is slightly more difficult to connect: You will need to find the backup light power wire that is coming from either the vehicles fuse box, or the transmission. Connecting the interrupt wire will allow the monitor to come on and turn off with the camera.
To use the device, just put your vehicle into reverse and turn the monitor on (assuming you did not hardwire it). If you are unsure as to your ability to work with wires, consult a professional.