Currently Unavailable
Want us to email you when this item becomes available?

Image Unavailable

Image not available for
Color:
  • Xboard Illuminators LED Lighted Risers, White
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      

Xboard Illuminators LED Lighted Risers, White


Sign up to be notified when this item becomes available.
  • Six Ultra Bright LED's
  • Built with ABS unbreakable plastic
  • Fits all skateboards and long boards
  • The product features Easy installation
  • The product features on/off switch

Shop Action Sports on Amazon
Need new skateboard bearings, new snowboard boots or a new leash for your surfboard? Amazon has you covered. Gear up for your skate, surf or snow sports needs and much, much more in our Action Sports store today. Shop now.


Product Description

LED lighted risers install between the truck and board to enhance the appearance of your board with a colored cloud of glow eminatting from beneath your board.

Important Information

Safety Information
Caution: Make sure that at least two threads of each screw extend beyond each nut after tightening. If at least two threads do not extend past each nut on all eight screws replace with longer screws before riding. Do not operate skateboard with only one x board illuminator installed. Do not install anything between the skateboard deck and the x board illuminator. Always wear a helmet and proper safety gear when riding a skateboard. Do not look directly into the LED when illuminated.

Product Details

  • Product Dimensions: 8 x 4 x 1.2 inches ; 3.2 ounces
  • Shipping Weight: 4 ounces
  • Shipping: This item is also available for shipping to select countries outside the U.S.
  • ASIN: B001S0GP1E
  • Item model number: XB101WH
  • Average Customer Review: 2.0 out of 5 stars  See all reviews (25 customer reviews)
  • Amazon Best Sellers Rank: #233,667 in Sports & Outdoors (See Top 100 in Sports & Outdoors)
  •  Would you like to give feedback on images?



Customer Questions & Answers

Customer Reviews

It wasted my time and money for other potential buys.
Greg Losco
This means that you can't screw the riser in flush against your board, and it stresses the riser battery casing the tighter you screw it.
B. Odom
When I received this item, there was only ONE riser, not riserS as advertised.
ellanoise

Most Helpful Customer Reviews

9 of 9 people found the following review helpful By bugscrocker on May 12, 2013
Verified Purchase
I read the reviews on this product and saw that most of the buyers were a little wary of it. But I decided to order two risers anyway. When I unpackaged them, neither of them worked. But here's the thing: There's a contact switch that allows you to test the lights while they're packaged. For some reason that I don't know, the manufacturer decided to attach the contact switch to only one end of the battery (the negative). I didn't notice this try-me switch until I unpackaged the risers, so I didn't get to test the switch. But it is my assumption that it wouldn't have worked since the switch was only connected to one end of the battery. YOU NEED TO REMOVE THIS CONTACT SWITCH. It adds no value to the performance of the LED's. It only draws current when the LED's are in use. You have now solved two problems. The circuit works, and the hole for the hardware is unblocked. But you also ned to replace the batteries. They are really crummy and, on many accounts, have corroded the positive end of the battery case. If your illuminators still haven't worked after removing the switch and the battery casing is corroded, do one or both of the following. (Do both until one works. It doesn't matter which order.) Put a small amount of vinegar on a Q-tip and rub the corrosion with the damp Q-tip. If the casing still appears corroded or you cannot remove the corrosion easily, take an ebony board to it. You don't need to get rid of all the corrosion. Just enough so that the battery can have contact with the casing. Then just replace the batteries. Easy fixes. Fixing the risers and then mounting the on my board took all of 10 minutes. But it's worth it. The only reason that I didn't give this product 5 stars is because the product isn't "ready-to-use" right out of the packaging. Feel free to ask any questions about preparing the risers!
1 Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
4 of 4 people found the following review helpful By josh on March 19, 2011
Color Name: Red Verified Purchase
These lights are bright, visible a long way and effective. I do not like the location of the switch, I run 83 mm wheels and it is very cumbersome to power them on and off. The switch is also located above the wheel and I fear moisture damage as the switch is exposed. I love the AA battery option, I used the Energizer E lithium, and haven't changed them yet in 4 weeks. It would be nice if the batteries where more easily accessible, truck removal is necessary to change the batteries. I gave these four stars for performance and effectiveness but must revoke one star for poor labeling by the manufacture. Last I checked a set of trucks are necessary to use a skateboard and these are sold in singles, with no indication of quantity. I also had to remove the "try me" button contact before I could install the unit otherwise the lights stayed on permanently.

*Note these add 1/8" rise.

Recommendations: Rubberized housing with gasket sealed battery doors accessible from the back next to the relocated weather sealed switch.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
2 of 2 people found the following review helpful By Kevin on February 6, 2012
Verified Purchase
Ordered 2 risers and did not work upon opening them. So I returned them for an exchange, thinking they were just faulty. 2nd shipment came with the replacements, guess what? Replacements don't work either, garbage technology that doesn't even work.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
1 of 1 people found the following review helpful By Rickysince1979 on September 18, 2011
Color Name: Blue Verified Purchase
I love these risers, they are solid and take ollies like nothin'...and i'm 215 lbs. these look awesome at night and i get lots of people checking em out.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
Color Name: White Verified Purchase
Contact points for battery were corroded. Probably due to liquid leaking from the included batteries, which didn't work anymore.
Very low quality.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By dlalo1994 on February 7, 2014
Color Name: White Verified Purchase
I put batteries in and the lights didnt work. I tried to put it on my board and the wires were in the way. also feels very cheap.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
Verified Purchase
I bought these thinking it would be cool to skate around with some of the neighbors. I received them and one failed to work right out of the box and the other worked for about 20 minutes before failing. What I find laughable is a week later my neighbors kid came out with two 250 Lumen $10 Harbor Freight flashlights epoxied to the bottom of his board and it actually looked better and much brighter than these ever could have been and best of all it didn't change the height of his board. In all, great idea - poor execution.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By Brian A. on October 26, 2013
Color Name: White Verified Purchase
this product wasn't engineered properly and therefore just sitting on my counter because I'm too lazy to return it kind of a waste of money
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again

Most Recent Customer Reviews

Search