Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

Xbox 360 Slim Crystal Clear GhostCase - CRYSTAL CLEAR

Platform : Xbox 360
3.6 out of 5 stars 45 customer reviews

Currently unavailable.
We don't know when or if this item will be back in stock.
  • NOTE: EXPERT MODDING SKILL REQUIRED
  • NOTE: THIS IS NOT A XBOX 360 SLIM BUT A CASE FOR XBOX 360 SLIM

Product Description

Black plastic got you bummed out? Swap that eyesore Xbox 360 slim black case for one of our Clear GhostCases. This is the most complete 360 slim case on the market, with high quality plastic that gives the appearance of glass (nobody wants opaque plastic cases)! Inside this amazing kit is also a clear fan shroud, without this vital piece you wouldn't even be able to see your circuit board! This piece opens up your console so you can see what is going on inside (this also allows for your custom lighting kit to light up everything in the case)! This Ultra Kit includes: Xbox 360 Slim Case Replacement Includes Custom Dual Light Kit Clear Fan Shroud Comes with all 3 Opening Tools (everything you need!) Extremely High Quality! Comes with a DVD tray bezel and fits all Xbox 360 Slim DVD drives!

Product Details

  • ASIN: B006BLV9D4
  • Product Dimensions: 12 x 4 x 12 inches ; 3 pounds
  • Media: Video Game
  • Average Customer Review: 3.6 out of 5 stars  See all reviews (45 customer reviews)
  • Amazon Best Sellers Rank: #23,881 in Video Games (See Top 100 in Video Games)
  • Product Warranty: For warranty information about this product, please click here


Customer Questions & Answers

Customer Reviews

Top Customer Reviews

Verified Purchase
Allright,
Now I have Modded Hundreds of Xbox's Been doing them since the old original xbox days.
I am going to say right now. On a scale from 1 to 10 1 being the easiest 10 being the hardest
i am going to give this a 12. Let me explain and I also Included a Video Link so you can see
this thing working... 1st The Faceplate does not come with the cable you have to peel your
original one from your faceplate and then apply it to the clear face plate. 2. the ring of light
comes with screws and spacers to install it on the new faceplate Well it leaves a gap between
the face plate and the button.. I had to take a dremel tool and open up the holes on the ring of
light and then fit it over the three posts and then apply some adhesive to the back of the button
so it would not come loose.. It only comes with a t-10 torx bit the Rf module uses i do believe
no 7's but it didn't come with that. Pulling the cable from the orginal face plate is not for the faint
of heart and you can tear it easily if you do not know what you are doing. I also had to cut down the
size of the faceplate pins so it would fit into the drive properly they are too thick. I ordered a
whisper fan and a clear drive plate from another supplier so that will get its own review. Needless to
say If you are not good with tools and have never played around with something like this... DON'T
Like i said i have been doing this for years But this was not easy AT ALL. 5 hrs later and some therapy
I am ok.. Lmao. heh

Link to video

https://www.youtube.com/watch?v=xJ8wHERAbn0
Comment 5 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
CovenantModsRep has it right, it's a great product but requires some finesse. Quality is great and once completed it looks sick, however; have a little patience and take a good look at things before you start mashing it together. Some clips and voids will inevitably need to be shaved and trimmed (nothing huge) and be careful when screwing it back together, microsoft screw heads are kinda soft: pre drilling the recieving plastic rods might be a good idea if your comfortable with it (if not leaving the screws a little loose is'nt a big deal it clips together uber tight). Be sure to remove the rubber feet on the side and bottom of your old case and bring them over (any foam padding on the inside as well but ive found many an xbox to be inconsistent with this), the stuff goes a long way towards keeping it quiet. Take your time with it and your efforts will produce wonderful led lit fruits for your friends to ooh and ahh over, you may even be back for more so many people have asked me to do it for them. pretty bomb.
Comment 6 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
Ok Guys Pros and Cons

Pros - Very Durable and Not cheap plastic, Crystal Clear, Looks great with light kits inside

Cons - A little tideous to put together, not in bad way, but for like the srews that attach top of case to metal interior the holes have to be made, and its not exact fit together, will be some trimming and nudging

Overall guys this is a great product and has an awesome look when done.

I will post a video of finished product when done
Comment 6 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
This case looks fantastic. I put it on without a problem besides the fact it was missing the ribbon, power button, and the plastic things that go on the bottom of your xbox so it doesn't slide or get scratched. This took forever to fit together and half the clips snapped. The power button was so hard to put on because i had to rip it off my old case... Just a big headache and broke my dvd drive from shoving it too much and had to open that and fix it... this is a headache and only do it if you buy an extra flex cable and power button. even then youll have to jam it in the xbox...
Comment One person found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
MUST READ! First of all the face plate doesn't even have a ribbon, so you cant turn on the console on or open the tray unless you don't put the face plate on or order a ribbon online. On top of that the casing is a watery clear so you can't see the interior as well. The casing also fells cheap and flimsy. On top of that they also include a glow kit that draws power from the disk drive that causes the drive to have "Open Tray" errors. To make matters worse the box does no include instructions on where to put the lights from the Glow Kit so you have to put it in and hope the casing doesn't smash the lights. All and all I wish I hadn't purchased this product.
Comment One person found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I LOVE my clear XBOX 360!!! Have a clear control as well :-) BUT the top and bottom clips/covers don't snap on perfectly or stay on just a bit.
the sections Im talking about are the Hardrive cover & vice versa..other than that I love it! Ill be ordering more for my small business
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I had no problems what so ever with this case. I've seen reviews from people saying its a tight fit, blah, blah. It fit exactly like the original case. What would be the point of a case that isn't snuggling with your xbox components? You wouldn't buy loose fitting condoms would you? I've never modified an xbox before and even without directions it only took me a half hour. You wont regret it if you have common sense!
Comment 2 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I recently bought this case and i was a bit scared to rip apart my new 360 slim but it worked out great. This case was very cheap comparing to the other and i only know of two slim clear cases this one made by ghostcase and the other is made by XCM the one from XCM come with a see through dvd drive cover with a window and that's about the only difference this case seems to be good quality but like another reviewer said some pieces simply do not fit together when i got mines the grills on the top and bottom of the xbox simply would not fit together so i had to use my stock grills and use a xacto knife to cut up the tabs a bit to get it to fit. Other problems where that the screw holes were not pre drilled and one of my screws got threaded and it was a huge pain to remove. Another problem was the lights when i received mines one of the wires were broken and i had to re-solder it to where it belonged. It was simple for me because i know how to solder but for someone who doesn't that might be a huge problem. All in all this is a pretty good basic case and i would give it overall a 4 out of 5.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Most Recent Customer Reviews




Look for Similar Items by Category

Pages with Related Products. See and discover other items: case modding, case mods, dvd/xbox game case, xbox 360 case glass