Customer Reviews

Yamaha RX-797 Audio/Video Receiver

5 star:		(17)
4 star:		(2)
3 star:		(0)
2 star:		(0)
1 star:		(2)

 

 

This is an excellent 2-channel Stereo Receiver, for several reasons. Let me explain why I chose this brand/model over others and how I came to it. If you are in the market for Stereo Receiver, it may be useful for you.

A few months ago, I was listening to a jazz CD on my cheap ($200) Sony Home-Theater-In-A-Box and noticed that the sound was noticeably tighter than when I listened to it on my much more expensive, but significantly older stereo system. My old stereo system was purchased as separate components in 1993. It consisted of Sony STR-D990 Receiver ($400), single-disc Sony CDP-211 CD player ($100) and pair of Advent Baby II speakers ($250). Mind you, each of these components work and sound as good today as they did 15 years ago at the time of purchase (kudos to Sony for that), but I suppose I'm getting a little pickier now that I'm in my 30s. Music plays a MUCH larger role in my life than movies or television does (hence the cheap Home Theater set-up), so I decided I needed to upgrade.

PRIORITIES: 1) SPEAKERS--> 2) RECEIVER--> 3) CD PLAYER --> 4) CABLING/INTERCONNECTS

I decided that speakers were most important and thus the place to begin. After reading several reviews, I decided that Polk Audio Rti6s might be a good choice. I went to a retail store to listen to them and they sounded really good, but then the sales associate let me listen to the Polk Audio Lsi9s. Whew! They just blew me away. I had never heard anything like them. While the Rti6s run for $270, the Lsi9s are $900, but well worth it for that price, as a long-term investment (Polks come with a 5-year warranty). But I noticed that these run at 4 ohms and need a low-impedance amplifier/receiver, that is, one equipped with so-called "high current amplification," to drive them. Well, my old Sony did not have this function (it could take only 8-0hm current speakers). So, I looked all around for a receiver that could fit the bill and the Yamaha RX line became the obvious choice, after reading positive review after positive review. Since the Lsi9s can handle 200 watts per channel, I chose the RX-797 because while it has a power rating of 100 watts per channel at 8 ohms, it allows one to use two 4-ohm speakers and when doing so there is a power boost. Customer representatives from various retailers couldn't give me an exact watt rating (because Yamaha does not conduct tests at with 4-ohm speakers), but the general concensus was that it would increase to about 140 watts per channel with 4-ohm speakers. (I just didn't want to shortchange my speakers). I also chose this receiver because of the extremely low Total Harmonic Distortion (THD) rating of .019% as well as the Pure Direct and CD Direct modes for the lowest possible distortion. (Compare these features to say Onxyo and Harmon Kardon A/V receivers in this range and you'll see that the advantage lay with Yamaha).

When the RX-797 arrived, it not only lived up to but exceeded my expectations. Paired with the Lsi9s, I can hear a much, much crisper separation of instruments, and this is especially nice for my digitally remastered jazz CDs. I live in an apartment complex now and never have the need to turn the volume beyond the 9 o'clock position. I have gone up to 11 o'clock for testing (when I knew my neighbors weren't in!) and, as expected with these ratings, I couldn't hear any distortion whatsoever. (I can't wait until I move into a house for a larger sound stage). Other pluses: The knobs and controls have a nice solid feel and look great. It picks up many more FM radio stations than my old receiver, and the reception is noticeably cleaner. The remote is simple and sensible (just how a remote should be). My only gripe is that one cannot program CD players made by other manufacturers with this remote, but perhaps thats standard practice. This has other nice features such as being XM Satellite Radio Ready and dual room/dual source for those who are interested, but the main selling points for me were the 4-ohm capability, the wattage rating and the extremely low distortion. The fine looks and sensible controls/display and remote are icing on the cake.

I found one from an authorized dealer by a fluke for $350, but certainly would have been willing to pay the full $499. If you see one for less than $450, be sure to first confirm with the seller (or better yet Yamaha) that they are indeed an authorized dealer; otherwise your two-year warranty won't be honored if you run into problems (not that I'm expecting to).

In sum, if you are looking for a receiver with ample, clean power, extremely low distortion, the abilitiy to drive 4-, 6- or 8-ohm loads, excellent FM reception, and easy to use and well laid-out functions for 2 channel (as opposed to Home Theater) listening, I don't believe you can do better for under $600 than Yamaha's RX-797 receiver.

I bought this receiver new for $350 (it was $499 at the local electronics outlet) to hook to a pair of new Bose 901's and couldn't be happier. I have always been a fan of Yamaha and this doesn't disappoint. Great power which delivers clean, crisp sound. I have a cheap Sony subwoofer hooked up also and the sound on music and movies is outstanding. Great features if you are not all that interested in surround sound. The remote is easy to use and the dual zone feature is nice.

Highly recommended, although the price is pretty steep. Can be found for significantly less expensive if you do your research.

From a long line of great Yamaha stereo receivers comes this wonderful model. This unit is rated at 100W/channel, but delivers much more like 150W/channel. Plus, it delivers these watts with exceptionally low distortion, comparing favorably to a $1200 Carver amp separate that I own. Besides, people obsess so much over their electronics that they forget the cardinal tenet of hi-fi: speakers are what make the real difference. Teamed with my Klipsch speakers and powered sub on low-pass filtering, this amp delivered extremely crisp sound, though it does lack the warmth of my pricier gear. Unless you're ready to drop some serious money on separate pre-amp and amp, it's tough to beat this little two-channel powerhouse.

I bought this receiver to replace my Insignia NS R-2000 (which I will refer to as "the old one") for my home stereo (only, i.e., not 5.1 or 7.1) sound (only, i.e. no video) system. While the old one has the same nominal power as the RX-797 (100 watts per channel), it has greater distortion, both nominal and perceptible. More to the point, it just couldn't cut the mustard with my Vandersteen 2C speakers (which have a well-earned reputation as great speakers but equally great power hogs), so I decided to replace it with the 797, and have been very pleased with the sound. I'll echo the other reviewers' notes on the tuner, especially the FM tuner, which comes in with nice clarity and separation, even with the little included one-wire antenna, which, by the way is much more convenient to deploy than a folded dipole.

On those bases alone, I would give it 5 stars, but there are some downsides of inconvenience on the one hand and unnecessary bells and whistles on the other, all of which cost it one star. On the old one, the tone controls were adjustable with the remote; on the 797, they are not. This probably has to do with a purist approach to both tone and volume controls, using old fashioned continuously variable resistors rather than discrete switching (which are easier to control remotely). On the 797, only the volume control is remotely operable, and that because it is motor driven, a seemingly unnecessary complicated and expensive way to accomplish something that could be done more cheaply, but, again, the purist approach leads to this, I suppose. As a result, there is no visual display of volume level other than the position of the little dot on the knob. So there are old-fashioned knobs for bass, treble, balance and loudness which you have to get up out of your chair to operate. Mind you, I'm not lazy, it's just that I can't hear from the same perspective when I'm standing in front of the amplifier as when I'm sitting in the chair, so adjustment of these controls is a not-always accurate extrapolation.

So, unless those concessions to tradition are truly necessary for the sound quality, those are the Paleolithic qualities. On the other side of the ledger are the modern advances, which strike me as unnecessary and not particularly desirable. The array of inputs and outputs looks like the button rack at your local sewing shop, but most of them are not particularly useful. There are video in and out sockets, which makes no sense to me, even if it is to be used in a home theater setup. And there's some feature called Zone 2, which allows you to use the preamp section to do some parallel processing to feed to a power amp in a different room. This also requires a separate remote control receiver (although the Zone 2 remote transmitter is included). Both of these must be wired from the one room to the other. I find it hard to believe that all that trouble and expense would be less than that associated with just getting a separate sound system in the second room. Understand that, despite the vast array of inputs and outputs, this is still strictly a 2-channel device, and will not handle 5.1 or 7.1 inputs, although there is a subwoofer output (high-impedance only, not amplified) that, as far as I can tell, just combines the two channels. In a similar vein is the XM radio feature. From my perspective, XM offerings in classical music are paltry, and would hardly justify the subscription fee. It would save only one piece of hardware. You still have to buy the antenna, but only avoid buying the converter box that you would have to have with a regular amplifier or receiver setup.

With all the bells and whistles, the remote gets pretty crowded and the buttons accordingly pretty small, despite the absence of tone or balance controls. There are buttons on the remote having to with television whose functions are not clear to me. I would prefer fewer and larger buttons, but I suppose Yamaha is trying to appeal to a larger market. At any rate, the important buttons, viz., volume, on, and standby, are large enough and logically laid out.

The speaker connectors are definitely a weak link. They are difficult to operate and too close together. They take only banana plugs and bare wires. I haven't tried the banana jacks yet; they seem like they would work well, but would add to the depth dimension, which is already fairly hefty. The side connections of the posts are designed for bare wire only and will not accept spade lugs. The reason is that there is a collar around the post with a slot in it into which you insert your wire. That collar is too high to get a spade lug under, even with the screw completely retracted. The purpose of the collar is to prevent accidental shorting, I suppose, and to that degree it works well. It also helps to guide the wire to where it needs to go, which is important, given the crowding of the posts. But the post contacts and screws seem to be of cheap metal and don't operate very smoothly. I don't know what kind of metal because the insides are hard to see. They bind particularly on tinned wire ends, presumably because the force is concentrated in one spot, which rocks the screw to the side, causing it to bind. I recommend that you NOT tin your wires, because the collar does prevent shorting and spreads the force over a larger area which reduces binding.

Likewise, the high impedance in and out RCA jacks are NOT gold plated, a bit of a disappointment. Interestingly, my $80 Yamaha DVD player which I use as a CD player, does have gold plated RCA jacks

So, bottom line, I would have preferred to save a few bucks with something that didn't include Zone 2, XM, subwoofer out, or many of the other inputs and outputs. I could also do with less purist tone and volume controls (as long as I wasn't sacrificing sound quality), but would like better connectors. One thing I had on my old cheap tube Dynaco preamplifier that I would like to see and have not seen on any contemporary receivers is a separation control, which partially mixes the two channels. This allows blending of over-separated material, and forcing the material to be monaural, which is sometimes useful for testing connections and speaker defects.

Assuming you want a stereo system, and not a surround sound, and assuming you live on some type of budget, this is an amzing deal at whatever price you find it at. It ranges from $350 to 550, but its worth the 550.
It has two features that I dont use, the XM capability and the 2 zone control, so I have nothing to say about these features.

The sound on this unit is exellent. It has a very low level of distortion at very high volumes.
The loudness control is great. It allows you to add a much fuller sound when listening at lower volumes.
It does what it is supposed to do, and what I bought it for.
It replaces my old Yamaha reciever that was almost the same except put out only 75W per channel. The sound is about the same, but this is louder (yay).
I have it pushing two JBL floorspeakers with 10 inch woofers. They are supposed to be able to handle 175 watts each, but this reciever does a great job of pushing them.
Buy it.

Yamaha RX-797 - AV receiver

Lots of power and very clean sound.

This is 2 ch so dont compare this to HTR models

I'm running Bose 301s and I cant ask for any more good clean sound, with lot of bass.
THD is very low... this is important

2 zone remote

Basic control that you dont need schooling for.

price is right.......I paid $425.00

Yamaha RX-797 Natural Sound Stereo Receiver February 2006 When the time came to replace my Yamaha RX-595 Stereo Receiver I started looking at new two channel stereo receivers. It is striking how limited the choices are. The market is flooded with multi-channel home theater unites, but I was only interest in stereo. I was looking to spend in the neighborhood of $500.00. Here are the choices I considered: NAD, Marantz, Onkyo , Rotel (which I could not find anywhere) and Yamaha. Harman-Kardon, Denon, Sony and Sherwood also make stereo receivers in that price range. Admittedly, I am partial to Yamaha receivers having had a wonderful experience with the RX-595. Suffice it to say I settled on the Yamaha RX-797. Right off the bat, I was not seduced by the way the unit looks. The elongated display, yellow in color, (without a radio signal strength indicator) did little for me visually. The fact that it supports XM Radio may have something to do with the way the display is configured. The seduction did not start until I turned the unit on and started to listen. The tuner is marvelous! On the FM side, all the stations normally listen to are crystal clear and I don't have to touch the antenna. On the AM band, I'm pulling in stations from Cleveland, New York and Boston in the afternoon without even trying (I live in the Philadelphia area). I don't believe my old tuner could do this. The tuning section is very strong. The first CD I played was by Dr. John, not the highest of quality CD in my collection, but it sounded ok. I then pushed the CD DIRECT button and to my surprise the entire display evaporated and went dark but the music keep playing. I eventually figured out that unit shuts down everything between the CD player , the amp and the speakers. A gimmick? Perhaps, but it's pretty cool. I've read a lot about new receivers lacking `warmth'. I think I know what that means. With this receiver I have experienced warmth and lack there of. Some CD s sound very warm and others sound somewhat harsh (I'm playing it all through a pair of $500 Klipschs) I attribute the difference to the quality of the CD. I really don't know for sure. Overall, I paid $450.00, this is a quality receiver for the money. It is built like a brick bathroom. It has lots of power -100 watts per channel, a great tuner, it's XM radio ready (if you're so inclined), supports two listening zones with two remotes including a sleep timer. This stereo receiver is an oasis in a waist land of Home Theater gluttony. If it had purple lights, instead of the yellow, it would be even be better.

I would highly recommend this stereo receiver, particularly if you want a solid two channel system that is able to drive high current into low impedance speakers without breaking a sweat [there is so much drive "head room" -- high dynamic power -- that you never get to distortion-causing "limiting" in the amplifier or from its power supply]. As 5 channel [an up] receivers proliferate, the availability of good two channel systems has declined considerably.

While multi-channel systems are certainly great for home theaters, providing a dynamic "imersive" experiance --- for enjoyable music listening, multi-channel's incremental sound experience improvement is only marginally better, if at all. Further, if the user is just interested music listening, two channel systems are simpler to set up in a room, since there are fewer speakers to be placed around the room [i.e. left, right and maybe a low-base unit --- no center or left/right rear speakers to be concerned with]. I still have my Yamaha RX-595 [which is very similar], purchased in 1998, for another room and it continues to perform excellently.

The RX-797 adds Sirius/XM capability and two listening zone capability [with an included second remote] and a slight power upgrade [100+100 watts instead of 80+80 watts for 8 ohm speakers, so this is a technical rather than a practical "improvement" over the older unit]. Both units share excellent damping factors [makes sure the speakers move the way the music wants, not the way the heavy speaker cones want], low level phono input, loudness control to correct for the ear's lower high and low frequency sensitivity as the volume is turned down, video switching, AM/FM receiver and the ability to send an output from one source to a recording device, while listening to another.

I am not a "Luddite" from 1811-16, but sometimes more is NOT better -- you have to fit the tool to the application. The choice is yours, good luck with yours.

I bought this receiver to power an extensive multi-room household system. It has the power to do that -- actual output at 6 ohms is 120W per channel. It can easily power several rooms at a time.

Beyond high output, this receiver has surprisingly good quality, on a number of attributes:

1) Sound quality is very good. I'd describe myself as semi-audiophile -- picky about hi fi reproduction, without being cultish about it. I seriously considered much higher-priced receivers, before deciding to give this one a try based on the strength of its reviews. I have not been disappointed.

2) The stereo tuner is exceptional. The FM clarity is terrific even with the dinky wire antenna provided.

3) The adjustable Loudness control is a godsend. Anyone living in an apartment with thin walls -- or who has auditory problems requiring low volumes -- will love this feature. This control, which boosts high and low frequencies to compensate for lower ear sensitivity to these frequencies at low volume, provides a great mellow output that delivers detail from lows to highs when quiet listening.

4) Sturdy metal construction. The power supply on this thing is a beast, and weighs a ton.

5) Friendly controls -- mostly knobs, rather than tiny buttons.

6) Amber LED readout -- easy on the eyes in a dark room

Stereo receivers this good at a low to mid price point are almost nonexistent in the present market. Kudos to Yamaha for providing this one (and please don't screw it up in a future model change!).

In 1981 I purchased a new Yamaha Amp and tuner. An A-760 and T-760. 80 watts/ch. What a delight. Over the years I've added many components. A phillips CD burner, a Sony CD burner, a single tray and a 5 disc carasel CD player and several other units. Through all the replacements, turn tables from the 80's, tape decks, etc. the one unit that never got replaced was the Yamaha amp/tuner. Never had a reason to. The speakers I now have are two pairs of Technics 3 way 12". Not a high caliber speaker but seem to sound great to me. THEY replaced Boston Acustics and a pair of infinities. Within the last 45 days, I decided to purchase the Yamaha RX-797, Yamaha YST-SW315 (250/w 10")sub woofer, and a new Yamaha CDC-697 CD player. I can't believe what incredible sound these 3 units are giving me. Now I've been around for a little while, I'm retired, but still feel like a kid when I walk into my living room. Those Technics speakers have never sounded soooo good. The sub is awsome. Crack rafters? I think so. The reciever by itself sounds so crisp with definate separation from L to R. The old reciever/tuner still work very well and will wind up in my son-in-laws rec room and probably give him and my daughter a few more years of pleasure. The only item left from the original purchase in the early 80's is a single disc Sony CD player. I kid you not, it still works perfectly. So for my money, its Yamaha and Sony with Yamaha on top.