DEWALT DW715 Heavy-Duty 15-Amp 12-Inch Compound Miter saw

Other products by DeWALT

Product Description

Amazon.com Product Description

The DeWalt DW715 Heavy-Duty 15 Amp 12-inch Compound Miter Saw comes with a powerful 15 Amp motor capable of 4,000 RPM operation for extended power and durability. With bevels at 3 to 48 degrees for increased cut capacity, this saw comes with an exclusive precise miter system and machined base fence support that maintains fence alignment for accurate cuts and an adjustable stainless steel detent plate with 11 positive stops for repeatable accuracy and work site durability. Four hardened steel bevel stops at 0, 33.9, 45, and 48 degrees deliver versatility and ease of use at commonly used bevel angles. This saw cuts 3-1/2-inch crown nested vertically for increased vertical cutting capacity and cuts 3-1/4-inch base vertically for increased vertical cutting capacity. Also featured is a 0-to-50-degree left and right miter capacity for added versatility in miter cutting. Its miter cam lock system provides increased ease of use and quick and accurate miter table positioning, and a horizontal main handle provides increased comfort during use.

This saw also comes with a tall sliding fence that support crown molding up to 5-1/4 inches nested and base molding up to 6-1/2 inches and easily slides out of the way for bevel cuts. Its arbor size is 5/8 inches. The DW715 weighs 42 pounds and is compatible with the DW7187 adjustable laser system. Backed by a manufacturer's 3-year warranty, this saw comes with a built-in carrying handle for increased portability, a carbide blade, an extension kit, a dust bag, and a blade wrench.

From the Manufacturer

DEWALT DW715 Heavy-Duty 15-Amp 12-Inch Compound Miter saw

Product Details

• Item Weight: 57.2 pounds
• Shipping Weight: 51.6 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• Note: Gift-wrapping is not available for this item.
• ASIN: B000ASBCK4
• Item model number: DW715
• Average Customer Review: 4.7 out of 5 stars  See all reviews (22 customer reviews)
• Amazon.com Sales Rank: #12,741 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #18 in

  Home Improvement > Power Tools > Saws > Miter Saws

Customer Reviews

Most Helpful Customer Reviews

28 of 28 people found the following review helpful:

5.0 out of 5 stars Excellent design, January 4, 2007

By	Bemace (Minnesota) - See all my reviews

I'm not a professional, I'm just a homeowner who appreciates quality tools, but it seems they got all the details right on this saw. Miter and bevel were perfectly aligned out of the box, which I checked with my triangle and with some test cuts. Getting it out of the box was easy too, thanks to the carrying handle on the saw head which is very solid and close to the center of balance. (Usually with big items like this you have to figure out how to get your hands underneath it and then hold the box down while you get it out.) The locking pin which keeps the saw head down when you're carrying it can be slid in and out easily but has no problem supporting the weight, while the spring that raises the head prevents the pin from sliding out accidentally. There are also good hand holds on each side of the base with rounded edges so they don't dig into your hands.

Bevel stops at 0 and 45 degrees make it easy to switch between common angles, but can be slid back after loosening a screw to allow a few more degrees either way when you need to compensate for other cuts that were a little off (made by someone else, of course). There's also a flip-out stop for 33.9 degree bevel which is also solidly made. The bevel locking knob-thing is nice and big, making it easy to grip and turn. The adjustable fence can be quickly adjusted with a single knob, but is still very sturdy when tightened down.

Miter adjustment is rock solid. The quick detents have no wiggle room at all, and the detent override makes it easy to adjust to any angle. The simple push-down miter lock is easy to use, and once locked I was unable to force it slip to either side.

The dust bag collects a bit over half of the sawdust, and as a result fills up pretty quickly. I'm planning to get an adapter so I can connect my shopvac to the dust outlet. If you're wondering, the dust port is 1.5" O.D.

Everything about this saw is sturdy, and all the adjustments can be made with very little effort. It's also a little quieter than I expected, which is nice. You can't go wrong with this saw.

8 of 8 people found the following review helpful:

5.0 out of 5 stars GREAT SAW, February 27, 2007

By	K. Sexton (Tampa, FL) - See all my reviews (REAL NAME)

I've had this saw for almost a year now and can still recommend this tool as a great purchase. Despite the 12" size, its remarkably light and portable which is a major plus as I don't have a workshop so I have to pull it out and set it up each time. Plenty of power. The miter stops are solid and extremely easy and accurate. I put on a Frued blade to take care of the molding work I mostly do and the results are always gratifying (when I measure twice). I purchased the Irwin laser for $25 and that works great as well.

6 of 6 people found the following review helpful:

5.0 out of 5 stars no complaints!, March 9, 2007

By	J. R. Dehaan - See all my reviews (REAL NAME)

Many people have beat up the yellow saws. I don't understand the psychology of DeWalt hate. This has been a fine saw. The blade is fine for construction work and eats 2x4's. I put a 80 tooth on it for finer work and it is spectacular. Out of the box it could have been ready to go, but I'm not one to expect perfection after mfg and shipping. To make this a really good saw, I screwed on a Dewalt 36-136 miter stand (I'm not worried about clashing colors!)