Sabrent SBT-STDB IDE Ultra ATA-100/133 to Serial ATA Port Mini Converter Adapter

Other products by Sabrent

Product Details

• Product Dimensions: 7.9 x 5.5 x 1.3 inches ; 3.2 ounces
• Shipping Weight: 1 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B000BNKEF2
• Item model number: SBT-STDB
• Average Customer Review: 2.7 out of 5 stars  See all reviews (10 customer reviews)
• Amazon.com Sales Rank

  Popular in this category: (What's this?)

  #87 in

  Electronics > Computers & Accessories > Internal Desktop Components > Network Cards

• Date first available at Amazon.com: April 2, 2004

Product Description

Amazon.com Product Description

Use the Sabrent SBT-STDB IDE Ultra ATA-100/133 to Serial ATA Port Mini Converter Adapter to convert Serial ATA (SATA) devices to work with an IDE controller.

Serial ATA supports transfer rates of up to 1.5 Gbps and the adapter is compatible with SATA devices such as hard disks and DVD, DVD-RAM, CD-ROM, and CD-RW hard drives. Hard drives larger than 137 GB are supported.

On one end of the adapter is a 22-pin SATA port and the other end has a 40-pin IDE connector. Simply connect them and the adapter will convert commands from one to the other.

What's in the Box
SBT-STDB IDE Ultra ATA-100/133 to SATA converter adapter, Y-type power cable, and quick installation guide.

Product Description

SABRENT SBT-STDB IDE Ultra ATA-100/133 to Serial ATA (SATA) Port Mini Converter Adapter - Convert SATA Devices to IDE port on your desktop! Convert High Capacity SATA Hard Drives and SATA Storage Devices to operate with IDE Host Controller! Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices, such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, and connect them to an IDE host Controller. This Bridge Board is a converter solution for Serial ATA Devices. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to a prallel ATA protocol and sent to the host. 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Mini Board size (75mm x 26mm), No space wasted Compliant with Serial ATA 1.0a specifications Supports Spread Spectrum in receiver Compliant with ATA specifications Compatible with Ultra ATA 133 / 100 / 66 / 33 ***100% hardware bridge converter to support PC, MAC and Linux environment*** Retail Package Content: IDE Ultra ATA-100/133 to Serial ATA (SATA) Mini Converter Adapter Male/Female Y Large Molex Power connector (8-inch length) Quick Installation guide

Customer Reviews

Most Helpful Customer Reviews

1 of 1 people found the following review helpful:

1.0 out of 5 stars ROLLED THE DICE.......SNAKE EYES, May 26, 2009

By	Robert M. Caudle - See all my reviews (REAL NAME)

WELL NO LUCK FOR ME WITH THIS PRODUCT. I ASSEMBLE MY OWN COMPUTERS, SET THIS DEVICE CORRECTLY, THE COMPUTER RECOGNIZES THE DRIVE AND INSTALLS THE OS BUT THEN THE MBR IS CORRUPTED. MY GUESS IS THIS DEVICE MAY WORK BETTER FOR SECONDARY DRIVES THAT DO NOT CONTAIN THE OPERATING SYSTEM.

3.0 out of 5 stars It works, but not as advertised, October 12, 2009

By	J. Knapp "Übergeek" (Connecticut) - See all my reviews (REAL NAME)

Amazon Verified Purchase

Running this adapter on an Intel D945GCLF2 with a Cavalry 64GB SSD. When using 80 conductor IDE cables (ATA-100 on my board), I experienced severe data read issues. As soon as I switched to a UDMA-33 cable (40 conductor), the drive reads were fine. This adapter is rated at ATA-100/ATA-133, but don't you believe it! That said, even at UDMA-33, performance is acceptable, and I purposely went for the cheap adapter & SSD drive. BTW, the SSD drive performed marvelously on a SATA port - Windows Storage Server 2008 desktop loaded in just under 4 seconds after reboot and logon... =0

1.0 out of 5 stars Do not ever buy this product, May 30, 2009

By	A disappointed buyer (NY, USA) - See all my reviews

Destroy my 500GB hard disk. Cannot recognize a few 250GB hard disks. For the hard disk that it can recognize, the transfer rate is very slow. The Amazon picture is different from what I received. The one I received is made in China. I bought from [...] the same Sabrent SBT-STDB in 2006 which has the same picture as on Amazon and it is made in Taiwan. It works like a charm with all my 250GB, 500GB and 1TB SATA hard disk. I order it despite others' negative comments because I see the same picture as the one I have and have good experience with it. But I received a different product which is made in China and which not only does not work but destroyed my hard disk with all its data. Highly recommend not buying this product.