Infinity Reference 1300a Mono Subwoofer Amplifier (Silver/Black)

Other products by Infinity

Product Details

• Product Dimensions: 2.7 x 9 x 14.2 inches ; 13 pounds
• Shipping Weight: 13 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B000RNS2UA
• Item model number: Infinity Reference 1300a
• Average Customer Review: No customer reviews yet. Be the first.
• Amazon.com Sales Rank: #3,562 in Electronics (See Bestsellers in Electronics)

Product Description

Amazon.com Product Description

The Infinity 1300a is a 300-Watt mono subwoofer amplifier with on-board electronic crossover and variable bass boost circuit.

Infinity Reference Series Amplifiers Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition. So expect extreme output from Reference Series amps, but be prepared for accuracy and detail that may surprise you. There is no better way to make your car audio system stand up and deliver than by powering your speakers and subs with Infinity electronics.

---

All the right features to get the job done. Click to enlarge.

Infinity 1300a Features

Class D Subwoofer Amps
Efficiency is the benefit of the Infinity Reference Series Class D subwoofer amplifiers. A higher percentage of the power the amp extracts from the car's charging system is converted into output to the speakers, and less is wasted as heat. That is really important if you're trying to provide power to a 1000-watt amplifier. Class D technology turns the analog input signal into a series of pulses that can be amplified more efficiently by transistors used as switches, rather than valves. They're either on and operating at their most efficient level, or they're off. The pulses are converted back into an analog signal by an output filter.

CEA-2006-Compliant
All Infinity amplifiers are tested in accordance with CEA-2006, which provides a testing procedure to help customers compare amplifiers accurately--apples to apples. Specs are based on industry-accepted standards, rather than on the whims of amplifier companies' marketing departments. Look for the CEA-2006 logo when comparing amplifiers, to be sure you're getting the power you're paying for.

Audiophile-Quality Full-Range Amplifiers
Class AB full-range amplifiers offer audiophile quality performance and the best compromise between efficiency, low distortion, maximum available headroom and output power.

Amps That Don't Break
Infinity amplifiers are tested according to the strictest and most demanding reliability-testing regimen ever designed for car audio amplifiers. They are shaken, baked, frozen, dropped and shocked--all while they're operating. When they've passed all these tests, they are tested again. The result is a series of amplifiers that just don't break.

DBO Bass-Optimization Circuit
provides superior control and adjustability, compared to traditional bass-boost. DBO is a 2nd order high-pass filter that can be adjusted between 20Hz and 80Hz. The boost (or Q) adjustment boosts the signal above the highpass filter frequency. Used with a sealed box, it can help to increase output for more "fun" if it's set to about 45Hz. If it's used with a vented box, it should be set at or slightly below the tuned frequency of the box. That will prevent woofer unloading, and provide more output at the frequency where the box is tuned and the woofer's excursion is minimized--where it can handle more power.

Onboard Electronic Crossovers
Reference Series amplifiers include 2nd order (12dB/octave) slopes and are continuously variable from 32Hz to 200Hz.

Variable Bass-Boost
Provides up to 12dB of boost at 50Hz in the Reference Series full-range amplifiers.

Direct-Connect Terminals
Eliminate the need for additional solder-on or crimp-on terminals and provide an easy and reliable connection for power, ground and speaker wires.

Full-Range Preamp Outputs
Eliminates the need for signal splitters.

Included Remote Level Control
The amount of bass in popular recordings differs greatly from track to track. This remote level control varies the output of the amplifier from no output up to the maximum output level that you set with the input sensitivity control.

---

Infinity 1300a Specifications

	Power Output:	200 watts RMS x 1 channel at 4 ohms and less than or equal to 1% THD + N
	Signal-to-Noise Ratio:	85dBA (reference 1 watt into 4 ohms)
	Dynamic Power:	342 watts at 2 ohms
	Effective Damping Factor:	6.3 at 4 ohms
	Frequency Response (-3dB):	11Hz to 330Hz (-3dB)
	Maximum Input Signal:	6V
	Maximum Sensitivity:	100mV
	Dimensions (L x W x H):	14-3/16 x 9 x 2-11/16 inches (360 x 229 x 68 mm)

---

About Infinity

Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.

---

What's in the Box

Infinity Reference 1300a Mono Subwoofer Amplifier (Silver/Black), Remote Bass Control and Cable, Mounting Hardware, Fuses, User's Manual

---

Infinity Amplifier Options

Infinity has approached the amplifier category with the objective of delivering maximum CEA-rated power with all the right features to get the job done. Infinity's Reference amps simply deliver.

Infinity Reference 1300a Mono Subwoofer Amplifier	Infinity Reference 1600a Mono Subwoofer Amplifier	Infinity Reference 5350a 5-Channel Amplifier	Infinity Reference 475a 4-Channel Full-Range Amplifier

Product Description

The Infinity Reference 1300a is a Mono Subwoofer Amplifier. This amplifier provides 200 watts RMS x 1 Channel at 4 ohms with very low distortion. It has a built in 12db variable electronic crossover as well as a variable bass boost of 0 to 6db at 50Hz. The amplifier has a very attractive low profile. This amplifier comes with a one year parts and labor warranty. Infinity Systems is a leader in loudspeaker design for both car and home speaker systems and is part of Harman International.