Apple Airport Express

Other products by Apple

Product Details

• Product Dimensions: 3 x 1.1 x 3.7 inches ; 6.7 ounces
• Shipping Weight: 1 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B0015YJOK2
• Item model number: MB321LL/A
• Average Customer Review: 4.2 out of 5 stars  See all reviews (172 customer reviews)
• Amazon.com Sales Rank

  Popular in this category: (What's this?)

  #1 in

  Electronics > Computers & Accessories > Networking Products > Access Points

• Date first available at Amazon.com: March 17, 2008

Product Description

From the Manufacturer

Faster Is Better
Now with blazing 802.11n, the affordable AirPort Express is powerful enough to run a home Wi-Fi network, yet small enough to take on the road. Here's some of the ways you can integrate it into your home.

Music AirTunes takes the music from the iTunes library on your computer and sends it wirelessly to any stereo or speakers in your home. All you have to do is plug an AirPort Express into an electrical outlet near those speakers, then connect them with an audio cable. In iTunes, you can choose which speakers you want your music to play on--in your den, living room, or bedroom. If you have more than one AirPort Express connected to speakers, you can play the same music on all your speakers at the same time to create a whole-house musical experience. Plus, if you already have a wireless network in place, you can use AirPort Express to add music to its capabilities.

Wireless Printing With wireless printing through AirPort Express, it’s almost like having a printer in every room of the house. AirPort Express uses the Mac- and PC-compatible Bonjour networking technology to let everyone in the house take advantage of one centrally available printer. Wirelessly, of course. If all you want to do is access your USB printer wirelessly, you don’t even need a broadband Internet connection. You can just set up your AirPort Express for wireless printing and that’s it.

Internet Sharing With AirPort Express connected to your DSL or cable modem, up to 10 users at a time can surf the web, send email, annihilate the competition in multiplayer games, and much more--wire-free. AirPort Express connects people to each other as well. You can wirelessly share photos, movies, and other files without having to worry about slow data transmissions. Nor do you have to concern yourself with a difficult network setup. AirPort Express uses the Bonjour technology in Mac OS X to allow your AirPort-equipped Mac computers running Mac OS X to find each other with no effort on your part--they discover each other just by virtue of being in range of the network.Compact and portable, AirPort Express is also a great way to share Internet access when you go on the road.

802.11n The AirPort Express Base Station now features 802.11n, the next-generation high-speed wireless technology included with most shipping Mac computers and some newer PCs with compatible cards. Based on an IEEE 802.11n draft specification, AirPort Express features two antennas and uses a technology called multiple-input multiple-output (MIMO) to transmit multiple data streams simultaneously. The result? AirPort Express delivers data transfer speeds up to five times those of previous-generation 802.11g wireless networks--while achieving up to twice the range. And with its support for both the 2.4GHz and 5GHz wireless frequencies, AirPort Express reduces the possibility of interference from appliances and cordless phones that use the 2.4GHz frequency.

Compatibility
Part Wi-Fi access point. Part wireless router. AirPort Express just works, seamlessly and wirelessly, with all your Wi-Fi devices. In fact, it’s the easiest way for everyone in your family to share a single broadband Internet connection and USB printer without messy cables.

Security The AirPort Express Base Station takes strong measures to keep your online world as safe as possible--from securing your base station to preventing outside intruders. It starts with the industry-standard encryption technologies built into AirPort Express, including WPA/WPA2 and 128-bit WEP.1 When you turn on encryption--easy to do using AirPort Utility--you’ll ensure that only people with the correct password can join your wireless network. AirPort Express includes a built-in firewall that creates a barrier between your network and the Internet. When you set up the base station, the firewall is automatically turned on to keep the bad guys out. For computers with a cable or DSL modem, using AirPort is actually safer than being directly connected to the modem.

AirPort Utility
If you think setting up a wireless network is difficult, think again. AirPort Utility for Mac and Windows guides you through the process, and you’ll have your network up and running in minutes. AirPort Utility does most of the work for you by stepping you through the setup process quickly and easily. For the most basic setup, all you have to do is plug your AirPort Express into an electrical outlet and connect your DSL or cable modem. Then open the AirPort Utility software and just follow the onscreen instructions.

AirPort Express works effortlessly with any computer that uses Wi-Fi standards, whether it’s a Mac or a Dell, HP, IBM, or any other Windows-based PC. That’s because the AirPort Express is compatible with computers using the 802.11a, 802.11b, and 802.11g specifications, and it also works with computers that are 802.11n draft 2.0 compliant.

Product Description

Now with blazing 802.11n, the affordable AirPort Express is powerful enough to run a home Wi-Fi network, yet small enough to take on the road. Share your wireless network with up to 10 users, print documents, photos, and more from any room in the house to one central printer, play iTunes music through your stereo or powered speakers using AirTunes, and more.

Customer Reviews

Most Helpful Customer Reviews

108 of 115 people found the following review helpful:

5.0 out of 5 stars Airport Express Set-up Instructions, June 20, 2008

By	S. Monroe "gadgethead" (Pittsburgh, PA USA) - See all my reviews (REAL NAME)

Amazon Verified Purchase

August 22, 2009 Update
-----------------------
The software that comes with new Airport Expresses is much more user friendly. You may find going through the instructions listed below is not required.

Regards,
S. Monroe

-----------------------------------------------------------

The CD that comes with the Airport Express has been useless to me in setting up a Windows XP computer to work with an AE. The instructions below should get you up and running.

1. First download the latest version of both the Airport Update and Airport Express Firmware Updater from [...]

2. Run the latest version of the Airport Update (4.1 at the time of this writing)

3. Disable your firewalls, plug in the Airport Express (AX) to an electrical outlet and attach it to your computer or router with an ethernet cable. The AX will have a steady or blinking yellow light.

4. Launch the Airport Admin Utility...it should detect the Airport Express in the "Base Station Chooser" within a minute or so and the light on the AX should turn green. You may have to hard reset the unit a few times by pushing the small reset button with a paperclip for about 10 seconds. If, like mine, it does not show up in the Airport Admin Utility leave the AX attached by ethernet and reboot, launch the Airport Admin Utility, and hopefully it will show up quickly.

5. As soon as it does show up, launch the latest Airport Express Firmware Updater (I used 6.1.1) and update the AX...this seemed to make a significant difference in the ease of detection later. This will take a minute or so. The AX will reset and you may have to leave it attached by ethernet, reboot, and relaunch the Airport Admin Utility to detect it again.

6. Once detected by the Airport Admin Utility, click the "Configure" button in the lower right hand corner.

7. A new set of tabs will pop up. Click on the "Airport" tab and select "Create Wireless Network" from the Airport Network dropdown box. This will be changed to "Join an Existing Wireless Network" later.

8. Now click on the "Network" tab and and check the "Distribute IP Addresses", the "Share a single IP address" button, and from IP range drop down list choose the IP range for your router (192.168.x.x being the most common for Dlink, lynksys, Netgear, and other non-Apple routers).

9. Go back to the "Airport" tab and change the "Create a Wireless Network" to "Join an Existing Wireless Network".

10. In the "Network Name" box type in the name of your wireless network (also called your SSID)

11. On the same page rename your AX to whatever you want it to be called in iTunes (often the physical location of the speakers the AX will be attached to, ex: Living Room, Bedroom, Ambient Sound), give it a new password (required), and give it a location.

12. If you are using security click on the security button, choose your encryption settings, and add your WEP key or password, etc. It might be handy to have your router security info open in a window so you can copy and paste the key right into the appropriate box.

13. If you now go back to the "Network" tab you will see everything is greyed out but now your new IP Range settings are visible.

14. With the AX still attached by etherlink, click the "Update" button and wait a minute or so for the AX to update. The changes you made should be reflected in the Airport Admin Utility when the update is complete.

15. Now you can launch iTunes and you should see a button in the lower right hand corner that says "My Computer". Click this button and you will see you have the choice of your computers speakers or the AX. Any further changes you want to make to the configuration such as the name you see in that button are easiest done while attached by ethernet so try to get it the way you want it with further Airport Admin Utility updates before unplugging the ethernet cable. As long as your Airport Admin Utility can see the AX you can update without being connected too.

16. When you are satisfied with the configuration and the AX is updated and is showing up in iTunes go ahead and unplug the ethernet cable. Now you can move The AX to your chosen locations electrical outlet, and hook up the audio cable. The AX light will blink yellow for a few minutes while being detected and then turn green. You can now choose your AX in iTunes and start playing your music as normal. Itunes will show it is busy connecting to the AX for about 30 seconds and then hopefully you will hear your music played from your remote speakers. I hope pulling this information together helps someone a little. Let me know if I missed something and I will update asap. Good Luck!

25 of 28 people found the following review helpful:

5.0 out of 5 stars Excellence, yet again, from Apple, May 3, 2008

By	S. Fitzpatrick (Maui) - See all my reviews (REAL NAME)

I'm a road warrior that uses this Airport Express to create a small wireless network, protected of course, within my hotel room. I just plug the AE into the 110v desk plug and then plug the hotel's internet cable into it. Instantly lets me un-tether from the desk to the couch, the other room, the bed, you name it. I was waiting for the "n" speed and am quite happy with this device. It never leaves my computer bag except at the hotels.

39 of 46 people found the following review helpful:

3.0 out of 5 stars Extremely Difficult To Set Up for Networking with Mac and PC, March 29, 2008

By	ZippyO "pgsev" (Salem, OR United States) - See all my reviews

Let me start off by saying, that once we got all the bugs worked out, this is an awesome little piece of technology. But I must also say, that it took an entire week to get all the functions to work correctly between just two computers on our home network (my I-Mac and my wife's Vista based laptop). Apple claims this is a "plug and play" item like everything else they sell. And being a die-hard Mac supporter, I can say up to this point, that has always been true. Yet for those of us out there that are not familiar with setting up a Wi-Fi network, which Apple claims this product is for us, beware, you need to understand and know a lot about Wi-Fi, your cable internet (if that is what you have), and much more before you can get this thing to work. Even though most Mac's have the correct drivers (Airport Utility, etc.) already installed. Don't bother with them, install what comes on the disc supplied with your AE, this will save you about an hour of headaches. And for Vista users, don't bother with what is pre-installed or what is on the disc, download the latest version of Bonjour from the Apple website, this will save you days worth of troubleshooting on how to get the printer recognized by your PC. But, like I said, now that everything is running (haven't tried the Air Tunes because I don't care about that feature), it is like all Apple products, very, very, nice, compact, and smooth running. Apple needs to send out more detailed instructions with this product and provide better support, after all, we expect that type of service from them, not the "it doesn't work and takes forever to fix" type of service most of us have come to know and love from Microsoft.