Black & Decker AF-100-3ZP 30-Feet 0.065-Inch Line String Trimmer Replacement Spool, 3-Pack

Other products by Black & Decker

Product Description

Amazon.com Product Description

The Black & Decker string trimmer Auto Feed System replacement spools provide 30-foot replacement lines for use in your auto feed string trimmer. These factory wound spools offer maximum reliability and eliminate the hassle of having to wind the spool yourself. The exclusive Black & Decker Automatic Feed Spool (AFS) system automatically advances the cutting string without bumping, using centrifugal force to feed the trimmer line as it is needed. Using the correct diameter line is critical to the performance of your string trimmer -- these spools feature a .065-inch diameter line and are designed for use with the following Black & Decker string trimmers: #GH400, #GH500, #ST6600, #ST7000, #ST7700, #CST1000, #CST2000, #NST2018. These spools are sold in a 3-pack to save you time and money and are backed by a 2-year full warranty.

Product Description

Autofeed Replacement Spool, For GH400, GH500, GH600, CST1000 & CST2000 Trimmmers.

3 PACK

See all Product Description

Product Details

• Product Dimensions: 3.2 x 2.5 x 2.5 inches ; 9.1 ounces
• Shipping Weight: 5.6 ounces (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B00004R9TL
• California residents: Click here for Proposition 65 warning.
• Item model number: AF-100-3ZP
• Average Customer Review: 4.3 out of 5 stars  See all reviews (70 customer reviews)
• Amazon.com Sales Rank: #417 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #1 in

  Home Improvement > Outdoor Power & Lawn Equipment > Outdoor Power Equipment Accessories > String Trimmer Accessories

Customer Reviews

Most Helpful Customer Reviews

47 of 47 people found the following review helpful:

5.0 out of 5 stars Get these extra spools and buy bulk line., March 12, 2007

By	Granville Bentley "Wally Weed Whacker" (Rocklin, CA USA) - See all my reviews

I somewhat agree with the guy from Vegas that this is a waste of money, EXCEPT that this is about the only way to get extra spools for your Black & Decker weed whacker. Note that you can buy a spool of 600 feet of .065 line from Amazon (Desert Extrusion brand, price is $8.80 for 600 feet in March 2007). Then, with the bulk line, plus these 3 spools, plus the spool that came with the weed whacker you can have up to 4 spools ready to rock and roll at minimal cost. Unlike the guy from Vegas, it takes me more than 2 minutes to hand-wind a spool, but not a lot longer, it's pretty easy to do, my main advice being I find it better to not try and wind more than 25 feet onto a spool even though it presumably can hold 30 feet of line. Everytime I wind more than 25 feet I get a lot of jams until the line gets those extra few feet chewed off. Hope this helps.

59 of 65 people found the following review helpful:

2.0 out of 5 stars Don't waste your money, July 2, 2005

By	Adam "adam18" (Las Vegas, NV) - See all my reviews

What the other reviewers fail to mention, maybe because they failed to try, is that the AFS on the trimmer continues to work flawlessly with hand wound string, and at less than 1/4 the cost it's seems like a huge waste to buy the pre-wound spools. It only takes 2 minutes to rewind a spool, so even when I do run out in the middle of a job, I just look at it as a 2-minute break from yard work. Of course, if your one and only concern is convenience, you may be looking at the right product. Be aware, if you've had trouble with rewinding trimmers in the past, it may be because you're using old line, which tends to get brittle over time. Buy some new line and try again. If you buy the three-pack of spools three times, you just paid for your trimmer again.
Thanks for reading,
Adam
ps. Two stars for effort, but the cost is just ridiculous.

8 of 9 people found the following review helpful:

4.0 out of 5 stars AF-100 on GH400 Trimmer Edger, October 15, 2000

By A Customer

The factory replacement spool for the GH400 Trimmer/Edger is the way to go. I have been very pleased with the easy to load and use spools. I have had bad luck with other trimmers, but this one is great with the factory replacement spool.