Quick-Grip 59200CD 2-Inch Handi-Clamp

Other products by Irwin

Product Description

Amazon.com Review
As its name implies, the Handi-Clamp is a handy tool to have around when you need to hold a work piece securely in place while working on it. The lightweight clamp squeezes into place easily and holds fast. Non-marring pads grip the work surface tightly, without damaging it. And a quick-release trigger on the handle makes it easy to remove or readjust the clamp as needed--no screwing, twisting, or tightening, just squeeze and clamp down. A larger, 4-inch version of the Handi-Clamp is available for clamping thicker materials, too. Rule number one in a workshop: You can't have too many clamps. --Carl Thress

Product Description
Quick-Grip&tmreg., 2" Variable Pressure Handi-Clamp&tmreg., C-Clamp Style Jaws With Non Marring Swivel Pads, Variable Force Controlled With User's Grip, The Tighter You Squeeze The More Clamping Pressure Is Applied, Locks In Position, Quick Release Trigger Removes Clamp From Work, 1 Hand Operation, Durable Glass Filled Nylon Construction.

See all Product Description

Product Details

• Product Dimensions: 1 x 2.2 x 6.8 inches ; 2.4 pounds
• Shipping Weight: 7 ounces (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Note: Gift-wrapping is not available for this item.
• ASIN: B000051WSG
• California residents: Click here for Proposition 65 warning.
• Item model number: 59200CD
• Average Customer Review: 3.0 out of 5 stars See all reviews (17 customer reviews)
• Amazon.com Sales Rank: #4,574 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #1 in

  Home Improvement > Hand Tools > Clamps > Spring Clamps

Customer Reviews

Most Helpful Customer Reviews

32 of 33 people found the following review helpful:

5.0 out of 5 stars cool tool, November 20, 2000

By	"toolpig" (Troy , KS) - See all my reviews (TOP 1000 REVIEWER)

I like these much better than the spring clamps we all use. It exerts more pressure with an easier release than a spring clamp of similar size. Just squeeze to lock it and it stays put. I used a couple the other day to hold a straight edge for routing dado's. I cut 3/4 x 1/2 deep runs with no slippage from the clamps. When I was done with each one I just squeezed the release and went on to the next . Lickety split. Nice idea !

22 of 25 people found the following review helpful:

5.0 out of 5 stars Look! True One Hand Operation!, March 3, 2001

By	Al the Pal "Al the Pal" (The Fruited Plain, United States) - See all my reviews (TOP 1000 REVIEWER)

I bought mine to hold shop-made jigs in place while routing and sawing. They are very convenient to use. The jaw has a maximum opening of about 2", but to get a really tight grip, about an 1 1/2" thick or less works best. I always keep the black release lever on the top handle if I can. Two of these will hold a jig very tightly. The rubber pads will not mar your workpiece or slip.

I have modified a few of my jigs by gluing 400 grit sandpaper to the bottom of the jig with spray-on contact cement so they grip the workpiece better. One finger will release even the tightest grip by pulling up in the black release lever. They are so much easier to use than "C" clamps or even larger Vise Grip bar clamps, which both have to be operated from below the table to assure a lower profile in your work area.

These are tough little clamps that you will find new uses for whenever you're in the shop. Get several - you don't want to end up "one clamp short of a set-up."

9 of 9 people found the following review helpful:

5.0 out of 5 stars AWESOME CLAMPS, March 10, 2001

By	BRADLEY KELLER (BRIGHTWOOD OREGON) - See all my reviews

The best way to describe this clamps is...It's like a "c clamp you dont have to thread up and down. Just a quick squeeze and poof, your locked down.The release can be done with one finger, how simple is that?A spring clamp of this size would take some real brawn to line up and clamp. Not this one people, it's as easy as squeezing toothpaste from a tube.It wont rust or leave those c clamp dimples we all hate.It' plenty big,wont mar your work and the jaw ends pivot for a good fit.Way to go American Tool, this ones a hit.I cant wait to see whats next.Now get out there and clamp away.