Robotoolz 3610-3 Torpedo 3 Level with 3 Beam Laser

Other products by RoboToolz

Product Description

Amazon.com Review

Relatively new to the world of tools, RoboToolz is fast making a name for itself by making better tools with technology. This torpedo level is a prime example with its three beams, accurate to plus or minus 1/4-inch over 75 feet and a laser visibility of 100 feet. Magnets lock to metal studs and pipes, and the V-groove aligns the unit with pipes. It also mounts quickly and easily to a 1/4-inch, 20-thread tripod as well as to most standard leveling bases. The three bubble vials are easy to read. This little fellow would make short work of cabinet installation--just set the level in the center of the room, adjust the free leveling base included, and mark your beam sites. A great choice for flooring, shelves, window and door framing, and finding elevation differences. Includes a one-year warranty. --Kris Jensen-Van Heste

Product Description

Handy tool is a 3-beam, level and square laser all in one! Provides three 90deg beams accurate to 1/4in. @ 75ft. Features magnetic base and straps. Also mounts to a 1/4in. x 20 threaded tripod (not included). V-groove aligns unit with pipes and through-holes accept standard screws. Accuracy: 1/4 at 75ft., Length (in.): 9 1/2

See all Product Description

Product Details

• Product Dimensions: 9.5 x 1.2 x 1 inches ; 1 pounds
• Shipping Weight: 1.4 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B00005A1JS
• California residents: Click here for Proposition 65 warning.
• Item model number: RT-3610-3
• Average Customer Review: 4.0 out of 5 stars  See all reviews (21 customer reviews)
• Amazon.com Sales Rank: #10,155 in Home Improvement (See Bestsellers in Home Improvement)

Customer Reviews

Most Helpful Customer Reviews

26 of 26 people found the following review helpful:

4.0 out of 5 stars Nice base, nice laser, poor switch, May 17, 2002

By	Tool Man Tim (Houston, TX United States) - See all my reviews

Often, a straight line isn't any good if its not level. The 'free' leveling base is a great addition that allows quick and precise leveling (to the accuracy of a bubble vial). The switch is easy to accidentally turn on. Plan on pulling the batteries out for storage. The laser is nice and bright. Be careful, it's easy to take one in the eye from the 'up' beam if you're looking from the top to level it.

29 of 30 people found the following review helpful:

4.0 out of 5 stars great layout tool, April 9, 2001

By A Customer

the robo square torpedo level is a convenient little tool. it's small enough to fit in my tool pouch, I use it to take measurements for bracket fabrication and check clearance if there are any obstructions before I begin any installation. The only design problem is the laser switch sometimes turns on when it is in my tool pouch.

16 of 17 people found the following review helpful:

4.0 out of 5 stars Robo Toolz Square from a handman's point of view, February 18, 2005

By	T. Gardner "Caveman Tools" (Ohio, USA) - See all my reviews (REAL NAME)

I have been looking at a lot of different laser levels for a good while and for the money, I was impressed, except for that stupid on & off switch. Almost tricky to use, you would think they would have a definite on or off. I did fix mine,if you have the patients and a dremel tool. They could of molded a high spot like I made so easy and fixed this switch. I had a pocket flashlight with a similar problem, always killing the batteries but not now. I used that idea to fix this problem. Makes you wonder if the engineers try these before they market them? One thing that is a must, is get that leveling base. That was the trouble with all the other lasers I had looked at. Like, how can you cast a straight beam of light from one point to the next if its not level, the base fixes that. As a pipefitter, I believe it would be handy for fabrication work too. I also made a leather pouch ( which they don't make ) for mine to protect it. I have used it a couple times now and it appears accurate. I also liked the laser dot, its cast a 4 point star dot which lets you get pretty accurate measurements with a ruler because you have the dot in the middle plus a North, South, East & West thin beam of light. Another neat feature is that they have slots cut threw the side of the level to use straps ( which again they don't make ) to hold the level to a non-metallic object, a two by four or plastic pipe. Not to mention, very strong magnets on the bottom of this level for the metal objects. Probably the neatest thing is the three laser beams, straight ahead, to the side and straight up. The only problem with this is if its on and you are trying to level it or use it, you can get the overhead beam in the eye if your not careful. What it needs is a simple cover that could slide on or off easily to disable the beam of light your not using. Hope this review helps someone.