KitchenAid K45B Flat Beater Replacement for KSM90 and K45 Stand Mixer

by KitchenAid

Product Features

• Ships in Certified Frustration-Free Packaging
• Replacement nylon-coated flat beater
• Use with KitchenAid KSM90 and K45 stand mixers
• Perfect for mixing cake batter, cookie dough, and more
• Handwash only; measures approximately 7-1/2 by 4-1/2 by 4-3/4 inches; 1-year warranty

Product Details

• Product Dimensions: 7.3 x 4.7 x 4.5 inches ; 8 ounces
• Shipping Weight: 1 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• ASIN: B00005LD47
• Item model number: K45B
• Average Customer Review: 4.3 out of 5 stars  See all reviews (66 customer reviews)
• Amazon Bestsellers Rank: #1,413 in Kitchen & Dining (See Top 100 in Kitchen & Dining)

Product Description

From the Manufacturer

Mix up your favorite desserts with KitchenAid's flat beater. This nylon-coated attachment fits 4-1/2-quart KitchenAid stand mixers. The beater is perfect for mashing potatoes, mixing cake batter and cookie dough, and so much more.

Product Description

Mix up your favorite desserts with KitchenAid's flat beater. This nylon-coated attachment fits 4-1/2-quart KitchenAid stand mixers. The beater is perfect for mashing potatoes, mixing cake batter and cookie dough, and so much more. Amazon.com has certified this product's packaging is Frustration-Free. A Frustration-Free Package is easy-to-open and comes without excess packaging materials such as hard plastic "clamshell" casings, plastic bindings, and wire ties. It is exactly the same as a traditionally packaged product--we've just streamlined the packaging to be opened without the use of a box cutter or knife and will protect your product just as well as traditional packaging during shipping. Products with Frustration-Free Packaging can frequently be shipped in their own boxes, without the need for an additional shipping box. Learn more .

Customer Reviews

Most Helpful Customer Reviews

52 of 52 people found the following review helpful:

5.0 out of 5 stars Adjust your beater to bowl clearance to eliminate chipping, November 25, 2008

By	Momof 3 (Michigan) - See all my reviews

This review is from: KitchenAid K45B Flat Beater Replacement for KSM90 and K45 Stand Mixer (Kitchen)

After reading these reviews, it seems that many people do not check their beater to bowl clearance. If a beater is chipping on the bottom, it means that it is too low. Sometimes, if the beater chips on the top, it means that the beater is actually too high, and the head can not lock properly, which can cause bouncing and chipping. You can look in your use and care guide, or go to kitchenaid.com to watch a video on how to locate the adjustment screw. If the mixer doesn't incorporate the ingredients in the bottom of the bowl, then the beater is too far away from the bowl. If you have a tilt-head mixer, the adjustment screw is located in the neck of the mixer-in the hinge-when you lift up the head, you'll see it. You can place a dime in the bottom of the bowl, and turn the mixer to "stir". If the dime moves around continuously, it is too low. If it doesn't move at all, it is too high and can't reach everything. It should scoot the dime around the bowl 1/4-1/2" at a time. I've had my beater, which is used a lot, for about 5 years, and it has no chips. If you have a bowl lift mixer, the adjustment screw is behind the bowl clip. If it's adjusted properly, you get the best mixing and the least wear and tear on your beater and bowl. The adjustment can change slightly over time.

23 of 25 people found the following review helpful:

2.0 out of 5 stars Works fine for a year or so until it's ruined. Now looking for 3RD replacement for this "disposable" item., December 12, 2006

By	JAB "JAB" (SLC, UTAH) - See all my reviews

This review is from: KitchenAid K45B Flat Beater Replacement for KSM90 and K45 Stand Mixer (Kitchen)

Who would've thought that these things wear out and must be discarded so often!?
I've previously purchased two of these as replacement beaters for our Mixer. They have each worked well for a year or so but then the plastic coating starts to wear away and falls off into your cookies/rolls/bread/whatever.

I honestly thought that the first time was a fluke but now that the second beater has shown the same problem I'd call it a flaw. I'm wondering if there is some other option for beaters that will NOT fall apart into my food after a year of mild to moderate use. I don't want to spend $15 every year on a stupid beater!

12 of 12 people found the following review helpful:

5.0 out of 5 stars 5 star duty, 3 star replacement need, January 5, 2003

By	Michele Mucke "BoiseGirl" (Boise, ID United States) - See all my reviews

This review is from: KitchenAid K45B Flat Beater Replacement for KSM90 and K45 Stand Mixer (Kitchen)

I have had my Kitchen aid for about 12 years, I love it! THe problem, as stated before, is the fact that the "metal" turns "bubbly" under the paint and the paint then starts to crack. This is not a favorable aging process. It does take several years to "turn", but when it does make you feel a little cheated, the price you pay for these machines shouldn't warrant this low-end occurance. While the beater lives it is SUPER! I make bread a lot in combo with the dough hook and it works great! Cookies, cakes , anything from scratch, you KNOW you'll be able to mix! Even something heavy or with nuts.. no problem! Kitchen-aid.. if you are reading this... Why ?! Why does this happen! The dough hook is still in prefect condition. I have other attachments and they are all heavy duty and GREAT!