Bosch RA1054 Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter

Other products by BOSCH (S-B Powertools)

Product Description

From the Manufacturer

The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the workpiece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses. The RA1054 also includes a pivot plate and can be easily converted into a circle guide for making circles and arcs up to 32 inches in diameter.

Product Description

Guides cut along the workpiece or up to 8" in from edge. Easily converts into circle guide for making arcs and circles up to 32" in diameter. Use on Model No.: 1611 series ; 1613 ; 1615 ; 1617 ; 1618; 1619EVS series routers and bases. Includes: Piv ot Plate, Dust Extraction Hood, Vacuum Hose Adapter & Attachment Hardware

Product Details

• Item Weight: 4 pounds
• Shipping Weight: 3 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Note: Gift-wrapping is not available for this item.
• ASIN: B00005RHPP
• California residents: Click here for Proposition 65 warning.
• Item model number: RA1054
• Average Customer Review: 4.3 out of 5 stars  See all reviews (23 customer reviews)
• Amazon.com Sales Rank: #917 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #2 in

  Home Improvement > Power Tool Accessories > Router Accessories > Templates

Customer Reviews

Most Helpful Customer Reviews

54 of 58 people found the following review helpful:

3.0 out of 5 stars Time will tell, November 30, 2002

By	Rex (Mars, PA United States) - See all my reviews

At first glance the Bosch RA 1054 looks unwieldy, complicated and maybe even fragile with multiple poles, thumbsrews, springs and a large dial in the rear. But I must admit that after a thorough review of the owners manual and little pre-marking of my project the performace thus far has been pretty good. I used the guide to cut six mortises in solid maple 3x3 stock for a bed project I'm working on. To be honest, I completely skipped the use of the set-up dial by pre-marking all my mortises directly on the stock, then simply lining up the cuts based on the width of the router bit I was using. During use the guide is stable, with a large and stout edge that worked well with the stock I was routing. Smaller stock may present a different complication. The guide was cake to set up in both the plunge and fixed bases of the Bosch 1617pk I was using (which by the way works like a dream - if only I had gotten the variable speed model!). Downsides so far...no carrying case for the guide which I predict will lead to damage ultimately (remember all the poles, springs dials etc...protruding out) and despite the ample space in the case of the 1617pk router, the guide doesn't fit in there either. Additionally, the guide makes placing the router when not in use a real trick. Due to its size the guide tends to pull the router over if left inverted on the workbench, and tips it forward even if place bit side down. My solution so far is to rest the non-guide half of the entire setup on a piece of 1x stock which works pretty well. Time will tell how well the guide ultimately works with small stock, precise setup requiring the setup dials and the durability of the thing. But for now, it's all I was able to find to work with. Folks at Bosh need to take a look at the new Porter Cable guide. That things looks like a steel I beam, seems simple to use, has one-piece design and appears to be quite sturdy. If Bosch doesn't come to the table with one, maybe an aftermarket maker will. A router the quality of the 1617pk deserves to have accessories of the same quality and build. Overall this is an acceptable edge guide that could be sturdier, simpler and come with a carrying case. Good wood working everyone!

47 of 50 people found the following review helpful:

4.0 out of 5 stars accurate and easy to use, April 28, 2002

By	James R. Smith "jsmithsussex" (Milwaukee wi) - See all my reviews

The unit attaches easily and the micro adjust ( the same as on their 1617EVS router) allow you to get extremely accurate adjustments. It lives up to the High quality of all the other Bosch products I've owned.

12 of 12 people found the following review helpful:

3.0 out of 5 stars Very accurate tool, June 19, 2004

By A Customer

Just made a large fluted column with the guide, and it worked very well. The tool has a very large adjustable edge guide for stable contact with the wood edge. The micro-adjustment feature worked very well. Rods are lengthy, so cuts can be made a long distance from the wood edge. With the router attached, it is quite top heavy. I place a wood spacer under the rods when at rest, or else the router will tip over if placed upright. Save the box and use for a case, no case is supplied. Material used could be a little more solid, considering the fairly hefty price.