DeWalt DW1969 29 Piece Pilot Point Twist Drill Bit Assortment with Metal Index

Other products by DeWALT

Product Description

Amazon.com Product Description

The DeWalt 29-Piece DW1969 twist drill bit assortment is a professional kit designed to deliver reliable performance across the board. Each bit larger than 1/8-inch features a patented Pilot Point Tip to prevent walking for improved accuracy and better finished products. DeWalt's patented tapered web prevents the frustration caused by broken bits, and a no-spin shank keeps the bits securely positioned, even when working with keyless chucks. As a bonus, the size markings on these bits are located above the shank, so you won't have to worry about wear making them unreadable. To help you stay organized, a useful metal index is included in this kit, along with split point bits from 1/16-inch to 1/8-inch and Pilot Point bits from 9/64-inch to 1/2-inch in 64th-inch increments.

From the Manufacturer

DeWalt DW1969 29 Piece Pilot Point Twist Drill Bit Assortment with Metal Index

Product Details

• Product Dimensions: 10 x 7 x 4 inches ; 3.5 pounds
• Shipping Weight: 3.2 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Note: Gift-wrapping is not available for this item.
• ASIN: B0000683DM
• California residents: Click here for Proposition 65 warning.
• Item model number: DW1969
• Average Customer Review: 4.3 out of 5 stars  See all reviews (9 customer reviews)
• Amazon.com Sales Rank: #9,496 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #62 in

  Industrial & Scientific > Cutting Tools > Drill Bits > Drill Bit Sets

• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

19 of 19 people found the following review helpful:

5.0 out of 5 stars These are the best Drill Bits I have ever used!, July 2, 2002

By A Customer

I have burned up many drill bits in the past, and for the price these are the best. These bits alleviate the drill bit change from having to drill a pilot hole when using larger bits. Every hole is dead on. No drill bit traveling or pulling of the wood or steel. I have used these bits to drill through wood, 1/4" steel plate and plastic. I have had no problems with any of the materials. The holes are straight and clean and right on the measurements that I needed. If you require an accurate hole being drilled, then there is no other drill bit to be using.

9 of 9 people found the following review helpful:

2.0 out of 5 stars Drill bits get stuck in the wood, March 10, 2008

By	Mel D. (California) - See all my reviews

Pros:

- 1/64" steps
- Very nice plastic case
- "No spin" hex shank (also lets larger bits fit 3/8" chucks)
- Pilot point works as advertised

Cons:

- Gold Ferrous Oxide instead of TiN
- More shank and less flute than your average drill bit

- Design aggressively chews up wood badly (with tear out on exit)
- Not good for soft woods (works better with harder woods)
- Flutes seem less sharp than other brands
- Too much heat concentrated at pilot point risks burning the bit

- Halfway down, bits bite hard into the wood (especially the larger ones) and cause the drill to screw itself into the wood until the chuck hits requiring you to backout and try again. This is very frustrating and is a major design flaw in my opinion. As such these bits are not well suited to hand drills.

If you are set on this purchase, consider the package with the measuring tape:

DEWALT DW1969TM Heavy Duty 29-Piece Pilot Point Set with FREE Tape Measure

Or the 25pc Black Oxide version with the normal tip:

DEWALT DW1164 25 Piece Black Oxide Drill Bit Set

Note there also exists a cobalt version with the Pilot Point tip:

DEWALT DW1269 29 Piece Cobalt Pilot Point Metal Drill Bit Index Set

8 of 8 people found the following review helpful:

5.0 out of 5 stars best bits for the money, November 13, 2005

By	StevieQ (Castro Valley, CA United States) - See all my reviews

For all-around shop use, these are the best drill bits for the money. I wish it had a titanium nitride coating, instead of a gold ferrous oxide coating. The no-spin shank is great for keyless chucks on hand drills. The pilot point helps to both start straight and drill straight. The only drawback with a pilot point design is that it's virtually impossible to resharpen a dull bit to the same shape. Maybe someday Drill Doctor will come out with a drill bit sharpener that can sharpen pilot points.