Dremel 400-6/90 400 Series XPR Variable Speed Rotary Tool Kit With 90 Accessories

Other products by Dremel

Product Description

Amazon.com Product Description

Featuring a planer attachment, MultiSaw attachment, FlexLite, flex shaft, cutting guide, and circle cutting jig, the Dremel 400 Series XPR Rotary Tool Kit model 400-6/90 comes with six attachments and 90 accessories that help you tackle a wide range of light-duty home improvement, hobby, craft, and art projects. This tool-and-attachments set lets you carve, grind, polish, trim, sand, and cut a variety of different materials, as well as shape, sharpen, clean, remove grout, smooth, drill, rout, sculpt, engrave, and strip.

The 400 Series XPR Rotary Tool can handle cutting, grinding, sanding, polishing, routing, drilling, and carving. View larger.

Compact, Variable Speed Design
Compact and lightweight at only 18.8 ounces, the XPR rotary tool provides variable speed (from 5,000 to 35,000 RPM) for better control, whether you're working with soft woods, hard woods, metal, beads, PVC, or stones. And because the speed selector switch is in a different location than the power switch, you can easily keep track of the last speed you used--making it a snap to immediately pick up where you left off. The tool also boasts a permanent magnet motor that gets the job done while maintaining a consistent level of speed and power.

Attachments for Exceptional Versatility
This set's key benefit is the versatility and efficiency of several different tools in one convenient, money-saving package. First, the Multisaw attachment powers through both wood and plastic, and makes either straight or curved cuts quickly and easily. There's also a planer attachment that allows for two types of planing (straight and at 45 degrees, with a width capacity of 2-1/8 inches) and lets you shape and carve with precision.

Flex Shaft and Flex Light for Hard-to-Reach Areas
A flex light (powered by included lithium ion batteries) gives you a clearer view of intricate materials or pieces, making it an ideal attachment for everything from creating or shaping jewelry or fine collectibles, to assembling dollhouse furniture and miniature cars. Another great option for this type of detailed work is the flex shaft attachment, which allows you to get into tight corners and hard-to-reach areas, such as under sinks, behind toilets, and in your car. Additionally, a selection of sanding discs and bands help with furniture or toy restoration projects, and a polishing wheel with compound and cone tip is great for buffing delicate pieces.

What's in the Box
400 Series XPR variable speed rotary tool, six attachments, and 90 accessories. (Click here for the detailed list.)

A hard shell case keeps your tool, attachments, and accessories safe and organized. View larger.

Product Description

Dremel 400 Series XPR Rotary Tool Plus, Attachments Included: XPR Deluxe Storage Case, XPR Multisaw, XPR Planer, Flex Shaft, Flex Lite, Cutting Guide, Circle Cutter & 90 Assorted Accessories.

See all Product Description

Product Details

Product Manual [793kb PDF]

• Product Dimensions: 20.1 x 10.9 x 7 inches ; 9.4 pounds
• Shipping Weight: 9.4 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0002QZ1P6
• Item model number: 400-6/90
• Average Customer Review: 3.7 out of 5 stars  See all reviews (91 customer reviews)
• Amazon.com Sales Rank: #505 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #4 in

  Home Improvement > Power Tools > Cordless Tools > Rotary Tools

• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

99 of 100 people found the following review helpful:

2.0 out of 5 stars What happened to the dremel I knew?, September 10, 2006

By	J. Frazier (Jacksonville, Fl) - See all my reviews (REAL NAME)

I have gone through 5, count them 5 of this model. 3 failed right out of the box! I had an older Dremel from about 1997 but sadly it was stolen from my shop. The basic design is flawed. The motor and switches get clogged and choked with dust and debris from everything I have tried to cut. The stop button to change the tips locks up. The on/off switch is so difficult to turn on and off I almost cut my hand off. I am saddened to see what has happened to the Dremel. Bosch seems to have taken a once great tool and ruined it. Same as they did for Skil. I am not trying to bash Dremel. I purchased the 3956-02 model and it works fantastic. Its just seems to be the 400-6 model. My recommendation is to skip this model and go for the less expensive Dremel 3956-02 model.

230 of 241 people found the following review helpful:

4.0 out of 5 stars Only for HOBBYISTS!, May 16, 2005

By	Magnus Opus (Washing DC) - See all my reviews

Keep in mind that this is not a heavy duty construction tool.

This tool will NOT be useful for:
a) cutting wood studs,
b) cutting large numbers of nails (though a couple is ok),
c) cutting large holes in drywall/sheetrock.

You will want to
a) avoid using in dusty environments. The internal parts are not sealed so that if you do not repeatedly clean it out after heavy use, you will kill the motor. (I should know. I killed mine after cutting through drywall for only 4 recessed can lights before it started smoking.)
b) move slow. It works by high rpms and has almost zero torque. Bring it to full speed and THEN cut.
c) use ear plugs. These suckers get very loud at the higher settings.
d) check out alternatives if you want construction equipment. The Dremel is actually MORE expensive than its alternatives because you are essentially paying for its small size.

What I like about the Dremel:
a) It is small.
b) It has more attachments and accessories than you can shake a stick at.

What I hate about the Dremel:
a) The documentation sucks. If you don't know the difference between a routing bit and a carbide bit, or what polishing creame is used for, then you're up a creek. The accessory packs are especially horrible. Nothing is labeled. You need to be able to tell what type of spindle goes with what type of gadget and the equivalent grit of the grinding stones by trial-and-error only.
b) Has small range. Only really useful for finishing and polishing. Very very light duty. I've heard people talk about using Dremel for this and/or that. When I tried it, it didn't work. Then I read in the little amount of documentation there is, that its not meant for doing that. Lots of misperceptions. Basically, do all the rough cutting work using other tools and finish off with this.
c) Accessory hell. Accessories are how they make the $$. Be prepared to pay through the nose for anything that doesn't come in the first box.

219 of 235 people found the following review helpful:

2.0 out of 5 stars A tool that feels like a toy..., March 7, 2005

By	lee280zx "lee280zx" (San Diego, CA) - See all my reviews

I have gone out of my way to review this Dremel under each of its listings (for the various kits it is included with) because I don't find any other reviews sharing my opinion.

I have owned 2 other Dremels, and used at least a half-dozen. I looked forward to owning this one since first seeing it advertised. It looked to be a significant improvement.

I bought this Dremel because it is the only one that works with Dremel's new multisaw attachment. With that attachment, which is sold separately, you can use it like a miniature reciprocating saw (Sawzall). Just pop any "T" or "U" shaped jigsaw blade in, and you're in business. I don't know of another tool that can be used in this way, and for that reason and that reason alone this Dremel is worth owning.

I already own another multiple-speed Dremel, and I thought I'd sell it once I bought this. But I'm keeping both because this new Dremel simply feels cheap and poorly made. It seems like its plastic case is flimsier and it doesn't feel as balanced when it's operating. It certainly isn't ergonomic. Any Dremel user who buys this latest model will instantly notice the drop-off in quality.

On the good side, the multisaw attachment works well and the molded plastic case is designed to hold the Dremel, the multisaw and planer attachments, jigsaw blades, the included circle cutter and flex shaft. The kit also includes two bit sets that lock onto the top of the case, with room for two more on the sides.

There's no way I can tell if this Dremel will last. I've put a pretty good load on the motor, and it hasn't failed. But I think that if I drop it more than a few feet onto a hard surface, it will break. The shaft lock button feels particularly cheap and uncertain. I expect it to break first.

Despite all my concerns I'm keeping this Dremel. But I'll only use it when I need the multisaw or planer attachment. Any other time I'll use my other Dremel (model no. 3956-02).

It's extremely unfortunate that at the same time it has chosen to make the most versatile Dremel yet, the company also decided to cut corners on quality. Dremel doubtlessly wanted to keep the price down on this unit, but in doing so they've produced a multi-function tool that feels like a toy.