Peerless Articulating Wall Mount For Up To 22" Display - Vesa 75/100MM (Silver)

Other products by Peerless

Product Details

• Product Dimensions: 7 x 3 x 11 inches ; 2.6 pounds
• Shipping Weight: 3 pounds
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B000BYCNM8
• Item model number: LCS-KLA
• Average Customer Review: 4.5 out of 5 stars  See all reviews (139 customer reviews)
• Discontinued by manufacturer: Yes
• Date first available at Amazon.com: November 20, 2005

Product Description

Product Description

The Peerless LCD Flat Panel Articulating Wall Mount provides a cost-effective mounting solution for 10" to 22" LCD at panel screens. Extremely flexible, this mount folds at against the wall to a slim 2" depth or extends out up to 15.25". Its silver finish elegantly complements conference rooms, merchandising displays, hotel rooms or any room in the home. This two-link arm provides easy, one-touch tilt and up to 180 degrees of swivel for optimal screen positioning. The LCS-KLA comes completely pre-assembled for a fast and easy installation.

Customer Reviews

Most Helpful Customer Reviews

81 of 81 people found the following review helpful:

5.0 out of 5 stars Solid and sturdy construction., March 17, 2006

By	B. T. Denyer "Graphic designer" (Midwest, United States) - See all my reviews (TOP 500 REVIEWER)    (REAL NAME)

I'm entrusting this wall mount to hold up my Viewsonic VA912-4 19" LCD. So far it has worked out beautifully.

BUT! I had to go to Lowe's to buy screws that fit the VA912. Even though the Viewsonic specifications clearly state that it has Vesa 100mm complient mounting holes on the back of the monitor, the 14mm screws provided with the Peerless Wall Mount were TOO LONG. They bottomed out on the display and had about 1/16th of an inch to go before the arm would be tight against the LCD's back. Washers didn't seem to allow it to tighten down securely enough.

If you have a Viewsonic display I STILL HIGHLY recommend this mount. But, I recommend you go out and buy four M4-.7 x 12mm machine screws. The screws provided are M4-.7 x 14mm and M4-.7 x 25mm. The 25mm screws are to be used with the plastic spacers (provided) for displays "with a hole pattern in a pocket."

Everything that came in my box:

(1) wall arm assembly
(4) M4-.7 x 14mm
(4) M4-.7 x 25mm
(4) .437H (plastic) spacers
(2) #14 x 2.5" flat head wood screw (these are big!)
(1) 4mm Allen wrench
(1) 5mm Allen wrench
(2) concrete anchors (yeah, you can hang this thing from a cinder block wall OR a stud in your drywall.)

You'll need to be able to find a stud in your wall, a drill, a big Philips head screw driver and I recommend a level or a friend that can 'eyeball' it for you (you want your monitor level, don't you?)

Don't let my experience discourage you! This arm is sturdy, trustworthy and quite useful for clearing up your desk. And who knows, maybe the screws provided will work for your LCD.

UPDATE: After 2 years, I am still very pleased with this thing. No sagging, no bending or twisting, no problems.

32 of 32 people found the following review helpful:

5.0 out of 5 stars Excellent Product, One Small Issue, February 13, 2007

By	Pileated (CT, USA) - See all my reviews

Amazon Verified Purchase

This unit is solid and very well made. THe mounting flange mates perfectly with my NEC 20" LCD monitor and the included screws fit as they should. In a few minutes I got my desk back! What's strange about this unit however is that even after I used a carpenter's level to mark the placement of the mounting holes on the wall, I found that the LCD is still not level when the entire setup is assembled. This means remounting the whole assembly at once rather than the mount and then the monitor (which is what the instructions show). This seems needlessly inefficient and a little precarious since the monitor and mounting hardware are all hanging by one screw while it's being done. Some users may not even worry about the screen not being level, but mine is mounted in front of picture frames and the out-of-level condition is conspicuous by comparison. (Dry wall anchors are included with the unit, but I strongly suggest not using them; find a wall stud and mount it right. Correction: these are concrete anchors, not for drywall. My concern is that someone might use them in drywall instead of screwing directly into a stud, which would be unfortunate to say the least when the screen hits the floor.)

30 of 32 people found the following review helpful:

2.0 out of 5 stars Not what pictured here or Peerless' PDF!! Specs wrong too!, November 29, 2007

By	J. SPIEGEL "Joe" (Los Angeles, CA United States) - See all my reviews (REAL NAME)

Amazon Verified Purchase

I'm downrating this product BEFORE I actually use it to hopefully catch your attention BEFORE you buy it! I read a bunch of reviews here, mostly favorable. One noted the itme pictured here on Amazon is different then what came. TRUE. It is also DIFFERENT than the item in the PDF from the Peerless site!! Seems there are 3 LCS-KLA'a but nobody (Peerless) has bothered to revision them ie. -1 -2 -3 etc. What I thought was the one in the PDF was the correct one, WRONG. The one pictured on the Peerless site IS the correct one. So it has a flat/squareish TV side plate with eight ROUND screw holes (not tear shaped) and it does NOT roll +/- 5 degrees. If you've ever hung a TV before tear shaped screw holes let you hang the TV on the already wall mounted arm EASILY! The 5 degree roll lets you correct a less than perfect install. I'm am currently waiting for a call back from a Peerless tech. I showed the CSR the bad PDF.